Operation Manual, User's Manual

5-52
SCANNER/INTERNET FAX►TRANSMITTING AN IMAGE
SPECIFYING THE ORIGINAL SCAN SIZE USING
NUMERIC VALUES
When scanning a non-standard size original such as a card or postcard, specify the original size using numeric values
after placing the original.
The width can be from 25 mm to 356 mm (1" to 14"), and the height can be from 25 mm to 216 mm (1" to 8-1/2").
When the scan size is specified by numeric values, the send size cannot be specified.
1
Tap the [Detail] key to change to normal mode.
CHANGING MODES (page 1-11)
2
Tap the [Original] key.
3
After tapping the [Scan Size] key, tap the [Direct Entry] key.
4
Specify the original size.
Tap the areas displaying width and height sizes respectively, and enter the sizes using the numeric keys.
It is convenient to use to finely adjust the entered size.
5
Tap the [OK] key.
After the settings are completed, tap twice.
On the base screen, check that the specified size is displayed on the [Original] key.
To cancel the specified size settings:
Tap the [Auto] key.