Operation Manual, User's Manual

6-17
DOCUMENT FILING►SAVING FILES WITH DOCUMENT FILING
DEFAULT SETTING FOR SCAN SAVE
In "Settings (administrator)", select [System Settings] → [Document Filing Settings] → [Condition Settings] → [Image
Orientation], [Default Colour Mode Settings], [Default Exposure Settings], [Default Original Image Type], [Initial
Resolution Setting], [Erase Width Adjustment] and [Card Shot Settings].
Image Orientation
Changes the image orientation.
Default Colour Mode Settings
Selects the default settings for black & white and colour when Scan to HDD is used.
Disable Change of B/W Setting in Auto Mode
This setting disables selection of B/W settings from the base screen when the colour mode is set to Auto.
Default Exposure Settings
Default exposure settings for document filing can be configured.
Select [Auto] or [Manual].
If you select [Manual], set the exposure to one of 5 levels.
Default Original Image Type
Select the original type beforehand to enable scanning at a resolution suitable for the original.
Initial Resolution Setting
One of the following resolutions can be selected for the default resolution for transmission.
Disable Text/Stamp functions for Reprinting
Prohibit using Text/Stamp functions for Reprinting.
Batch Print Settings
Configure the settings for using Batch Print.
Print Order Setting for the Batch Print/Multi-File Print
Configure the print order settings when using Batch Print and Multi-File Print.
Erase Width Adjustment
This is used to set the default erase width for erase function.
Specify a value from 0 mm (0") to 20 mm (1") in increments of 1 mm (1/8") for both edge erase and centre erase.
Card Shot Settings
This is used to set the default original size for the card shot function.
Specify a value from 20 mm (1") to 210 mm (8-1/2") in increments of 1 mm (1/8") for both the X (horizontal) and Y
(vertical) dimensions of the original.
Fit to Store Size
Always displays the [Fit to Store Size] key on the card shot screen.