Operation Manual, User's Manual

7-63
SETTING MODE►SYSTEM SETTINGS
PCL Settings
This is used to set the symbol sets, fonts, and line feed code used in a PCL environment.
Settings
Setup Items Settings Setting
PCL Symbol Set Setting Specify the symbol set used for printing. • Select from 35 items.
PCL Font Setting Select a font used for printing.
• Internal Font
• Extended Font
• (List of internal fonts when
extended fonts are not
installed.)
PCL Line Feed Code
This setting is used to select how the printer responds when a line
feed command is received.
• 0.CR=CR; LF=LF; FF=FF
• 1.CR=CR+LF;
LF=LF;FF=FF
• 2.CR=CR; LF=CR+LF;
FF=CR+FF
• 3.CR=CR+LF; LF=CR+LF;
FF=CR+FF
Wide A4
When this is enabled, 80 characters per line are printed on the A4
(8-1/2" x 11") size paper using a 10-pitch font. (When this setting is
disabled, up to 78 characters are printed per line.)
• (Enabled)
• (Disabled)