Operation Manual, User's Manual

7-80
SETTING MODE►SYSTEM SETTINGS
Common Settings
Paper Settings
Paper Tray Settings
Paper Weight
These are used to control the toner fusing temperature according to the weight of the paper.
These settings apply to plain paper, recycled paper, punched paper, pre-printed paper, letterhead paper, coloured
paper, and user type paper.
You can select "60 - 89 g/m
2
" or "90 - 105 g/m
2
" ("16 - 23 lbs." or "23+ - 28 lbs.").
Operation Settings
Condition Settings
Data List
To specify [One Sided] or [Two Sided] printing in Data List.
Custom Link Setting
The stored Web addresses can be displayed in the display area of the setting menu.
Click a custom link to jump to the website of the stored address.
Device Control
Various devices mounted on the machine can be set.
Condition Settings
Paper Type for Auto Paper Selection
The paper types* that the Auto Paper Selection function will select can be specified. Select one of the following settings:
• Plain 1
• Plain 2
•Recycled
The Auto Paper Selection function will not select any paper types other than the paper types specified with this setting.
* The paper type set for each paper tray by selecting [System Settings] in "Settings" → [Paper Tray Settings].
Plain Paper Compatibility Settings
Set the weight of the plain paper that is regularly used. Select from Plain Paper 1 or Plain Paper 2.
The weight of Plain Paper 1 is 60 to 89 g/m
2
(16 to 24 lbs bond). The weight of Plain Paper 2 is 90 to 105 g/m
2
(24 to 28
lbs bond). Check the weight of the plain paper that you regularly use, and set accordingly.
Detect Standard in Auto Colour Mode
When the colour mode is set to auto in image send mode, the discrimination point for detecting whether originals are
colour or black and white can be set to one of 5 levels. When set to [Closer to B/W ], the originals are easier to recognize
as black and white. When set to [Closer colour], the originals are easier to recognize as black and white.
This can only be set on the machine's operation panel.
Be sure to use only paper that is in the same weight range as the weight range set here. Do not mix plain or other paper that
is outside the range with the paper in the tray.
When settings are changed, the changes will take effect after the machine is restarted. To restart the machine, see
"TURNING ON THE POWER (page 1-8)
".