Operation Manual, User's Manual

4-30
FACSIMILE►BASIC TRANSMISSION METHODS
FAX TRANSMISSION METHODS
USING THE AUTOMATIC DOCUMENT FEEDER FOR
TRANSMISSION
Storing scanned originals in machine's memory before transmitting them is called "Memory TX".
This section explains how to scan the original through the automatic document feeder and send the data by the memory
transmission function.
• To fax a thick original or other original that cannot be placed in the automatic document feeder, open the automatic
document feeder and place the original on the document glass.
• If there is a fax job in progress when the transmission operation is performed, the fax is transmitted when the job in
progress is finished.
• If the memory becomes full while the originals are being scanned, a message will appear and scanning will stop. When
Quick On Line Sending is enabled for transmission, the scanned originals are sent.
• To disable the Quick On Line Sending setting:
In "Settings (administrator)", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Send Settings] →
[Quick On Line Sending].
If you disable this setting, memory transmission will not begin until all pages have been scanned.
• To set the scan complete sound:
In "Settings (administrator)", select [System Settings] → [Common Settings] → [Sound Settings] → [Beep Sound Settings
(Common)] → [Scan Complete Sound (Image Send)].
1
Place the original in the document feeder tray of the automatic document feeder.
► AUTOMATIC DOCUMENT FEEDER (page 1-111)
2
Specify the destination fax number.
• Entering a destination number using the numeric keys►page 4-12
• Retrieving a destination from an address book►page 4-14
• Using a search number to retrieve a destination►page 4-17
• Retrieving a destination from a global address book►page 4-18
• Using a transmission log to resend►page 4-20
3
Tap the [Start] key to begin transmission.
When scanning is completed, the machine beeps.