Operation Manual, User's Manual

2-56
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Copy by specifying a repeat count (Fixed Repeat)
7
Specify the repeat partition line.
After the settings are completed, tap and [Back] keys in
sequence.
• To cancel the Auto Repeat setting:
Tap the [Off] key.
• To cancel all settings:
Tap the [CA] key.
8
Tap the [Colour Start] or [B/W Start] key to start copying.
1
Perform steps 1 to 3 in Copy by automatically calculating the repeat count
(Auto Repeat) (page 2-55).
2
Tap the [Fixed Repeat] key.
3
Tap the [Original] and [Paper Select] keys to select an original size and a
paper size, respectively.
► SELECTING THE ORIENTATION AND SIZE OF THE ORIGINAL (page 2-32)
► SELECTING THE PAPER TRAY FOR COPYING (page 2-12)
4
Tap [No. of Faces] to set a repeat
count.
After the settings are completed, tap .
The automatic calculation result is shown as the copy ratio.
If the calculated copy ratio exceeds the range from 25% to 400% (using document glass) or 25 to 200% (using automatic
document feeder), an error occurs.
Off
CA
Preview
B/W
Start
Colour
Start
Colour Mode
Change Size/Direction.
Original
Back
Current Setting
No. of
Faces
Original
Paper Select
Copy Ratio
Auto Repeat
Fixed Repeat
Photo Repeat
Auto Layout of Repeat Face Based on Original, Paper Size and Ratio.
Repeat Layout
Others
Background Adjustment
Select Type/Exposure
Exposure
Layout w/o spacing
Layout
Parting Line
Off
Preview
Start
Back
Colour
Start
Repeat Layout
No. of Faces
Others
Exposure
Select Type/Exposure
Background Adjustment
Colour Mode
Change Size/Direction.
Original
4 Repeat
2 Repeat
8 Repeat
16 Repeat
CA
B/W