Operation Manual, User's Manual

4-28
FACSIMILE►BASIC TRANSMISSION METHODS
WHEN A COMMUNICATION ERROR OCCURS
If a communication error occurs or the other fax machine does not answer the call within a preset period of time,
transmission will automatically be attempted again after a preset interval. This function only operates in memory
transmission mode.
Area Differentiation Table
Faxes sent by direct transmission or manual transmission are not automatically resent.
To cancel transmission:
Do so from the job status screen.
► User's Manual (Touch Panel
Operation)
To set the number of recall attempts and the interval between attempts when a transmission fails due to an error:
In "Settings (administrator)", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Send Settings] →
[Recall in Case of Communication Error].
• Number of Times to Recall in Case of Error
Specify how many times the machine will re-attempt the call when a communication error occurs.
• Interval to Wait Between Recall Attempts (min.) in Case of Error
The interval between recall attempts can be set.
The number of recall attempts and the interval between attempts that can be set in each area are shown in the
following table.
The number of recall attempts The interval between
attempts
United Kingdom, France, Germany, Sweden,
Italy, Spain, Netherlands, Saudi Arabia,
South Africa, Hungary, Czech Republic,
Slovakia, Poland, Greece, Russia
1 to 5
(default: 1)
any number of minutes
from 1 to 15
(default: 3)
Australia,
New Zealand, Canada
1 attempt any number of minutes
from 1 to 15
(default: 3)
Singapore, Thailand, Malaysia, India,
Philippines
1 to 9
(default: 2)
any number of minutes
from 1 to 15
(default: 1)
Hong Kong 1 to 3
(default: 2)
Taiwan 1 to 15
(default: 2)
Indonesia 1 to 5
(default: 2)
any number of minutes
from 4 to 15
(default: 4)