Operation Manual, User's Manual

1-3
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
PART NAMES AND FUNCTION
EXTERIOR
(1) Automatic document feeder
It automatically feeds and scans multiple originals. 2-sided
originals can be automatically scanned. For the MX-3071/
MX-3071S/MX-3571/MX-3571S/MX-4071/MX-4071S/MX-5071/
MX-5071S/MX-6071/MX-6071S, both sides of 2-sided originals
can be automatically scanned at one time.
► AUTOMATIC DOCUMENT FEEDER (page 1-116)
(2) Output tray (exit tray cabinet)
*1
Received faxes and printed papers are delivered to this tray.
(3) Job separator tray (upper tray)
*1
Output is delivered to this tray.
You can also output jobs to the job separator (centre
tray) when a relay unit is installed.
(4) USB port (A type)
This is used to connect a USB device such as a USB
memory device to the machine.
Supports USB 2.0 (Hi-Speed).
(5) Operation panel
This panel hosts the [Power] button, [Power Save] button/indicator,
error indicator, [Home Screen] button, main power button, data
notification indicator, communication indicator, and touch panel.
Use the touch panel to operate each of these functions.
An NFC touch point area mark also appears.
(MX-3061/MX-3061S/MX-3071/MX-3071S/MX-3561/MX-3561S/
MX-3571/MX-3571S/MX-4061/MX-4061S/MX-4071/MX-4071S/
MX-5071/MX-5071S/MX-6071/MX-6071S)
► OPERATION PANEL (page 1-8)
(6) Exit tray unit (right tray)
*1
Set this tray as the output tray if needed.
(7) Keyboard
*2
Use this as a substitute for the soft keyboard displayed
on the touch panel. When not being used, it can be
stored under the operation panel.
(8) Inner finisher
*1
This staples paper. A punch module can also be installed to punch
holes in output paper. You can also perform stapling manually.
► INNER FINISHER (page 1-123)
(9) Toner cover
(MX-5051/MX-5071/MX-5071S/MX-6051/MX-6071/MX-6071S)
Open to replace a toner cartridge.
►
REPLACEMENT OF TONER CARTRIDGE (page 1-169)
(10) Front cover
(MX-5051/MX-5071/MX-5071S/MX-6051/MX-6071/MX-6071S)
Open to switch the main power switch to "On" or "Off".
► TURNING ON THE POWER (page 1-12)
(11) Front cover
(MX-2651/MX-3051/MX-3061/MX-3061S/MX-3071/MX-3071S/
MX-3551/MX-3561/MX-3561S/MX-3571/MX-3571S/MX-4051/
MX-4061/MX-4061S/MX-4071/MX-4071S)
Open this cover to switch the main power switch to "On"
or "Off" to replace a toner cartridge.
► REPLACEMENT OF TONER CARTRIDGE (page 1-169)
*1 Peripheral device.
Equipped standard or not available in some countries and regions. Not available on some models. Contact your dealer or
nearest authorised service representative.
*2 This device can only be equipped on the MX-3061/MX-3061S/MX-3071/MX-3071S/MX-3561/MX-3561S/MX-3571/MX-3571S/
MX-4061/MX-4061S/MX-4071/MX-4071S/MX-5071/MX-5071S/MX-6071/MX-6071S.
BEFORE USING THE MACHINE
(3) (7)
(5)(1) (4) (6) (8)
(2)
(9) (10) (11)
(1)
MX-2651/MX-3051/MX-3061/
MX-3061S/MX-3551/MX-3561/
MX-3561S/MX-4051/MX-4061/
MX-4061S/MX-5051/MX-6051
MX-2651/MX-3051/MX-3061/
MX-3061S/MX-3071/MX-3071S/
MX-3551/MX-3561/MX-3561S/
MX-3571/MX-3571S/MX-4051/
MX-4061/MX-4061S/MX-4071/
MX-4071S