Operation Manual, User's Manual

7-103
SETTING MODE►SYSTEM SETTINGS
Condition Settings
Restrict Print Jobs other than the current Print Hold Job
You can select settings to cancel print jobs that are not print hold jobs, or force all print jobs to be held. When [Restrict
Print Jobs other than the current Print Hold Job] is turned ON, the settings below can be selected.
Automatic Deletion of Suspended Print Jobs
If a job is interrupted because of a paper jam or similar, then after the time set in "Time until Suspended Print Jobs are
Automatically Deleted", the job will be automatically deleted.
Time until Suspended Print Jobs are Automatically Deleted
Set the time after stopping a job to automatically deleting the job.
Reject Requests from External Sites
You can reject the request from external sites.
If Firmware Corruption is Detected, Restore It
When the machine is started up, it checks the firmware and if damage is found, it will automatically recover to the state
before the damage.
Apply Security Policy
The default administrator is displayed at login. Set whether to apply security policy on this machine.
Mandatory Access Control
Set whether to perform mandatory access control. You can force access control to all the files inside the machine.
Item Settings
Force Retention
This setting forcibly sets all print jobs as print hold jobs, even jobs for which print hold is not
selected.
Disable Job Prohibit all print jobs other than print hold jobs.