Operation Manual, User's Manual

7-124
SETTING MODE►SETTING MODE FOR FAX
•ECM Enabled No Yes 4-54
Digital Line Network Disabled No Yes 4-5
Distinctive Ring Detection
*1
Off No Yes 4-55
PBX Setting
*1
Disabled No Yes 4-8
Send Settings
Auto Reduction Sending Setting Enabled No Yes 4-26
Rotation Sending Setting All Enabled No Yes 4-25
Printing Page Number at Receiver Enabled No Yes
4-82
Default Own Number Sending Enabled No Yes
Sender Destination Name Switch Fax No. No Yes
Date/Own Number Print Position Setting Outside the Original
Image
No Yes
Recall in Case of Line Busy Varies depending on
country and region
No Yes
4-27
Recall in Case of Communication Error Varies depending on
country and region
No Yes
4-27
Disable Fax Broadcasting Disabled No Yes 4-29
Receive Settings
Number of Calls in Auto Reception 2 times No Yes
4-58
Switching from Manual to Automatic Reception No Yes
- Switching to Automatic Reception Disabled No Yes
- 2-Sided Printing of Received Data Disabled No Yes
- Auto Receive Reduce Setting Enabled No Yes
Print Style Setting Auto Size Select No Yes
Set the Telephone Number for Data Forwarding No Yes
4-59
- Forwarding Address Number Setting No Yes
Letter Size RX Reduce Print
*1
Disabled No Yes
Receiving Date & Time Print Disabled No Yes
A3 RX Reduce
*1
Disabled No Yes
Output Tray No Yes
Number of Prints 1 No Yes
Staple Settings
*2
1 Staple at Back No Yes
Paper Size A4 or A4R (8-1/2" x 11"
or 8-1/2" x 11"R)
No Yes
Setup Items
Factory default setting
U A Page