Operation Manual, User's Manual

1-113

BEFORE USING THE MACHINE►LOADING PAPER

Loading tab paper

When printing on tab paper, be sure to place the paper with the print side facing down.

For the bypass tray (on the large capacity trays), the dedicated guide must be installed in the bypass tray guides at the

rear end. The dedicated guide is in the upper side of the large capacity trays.

Inserting transparency film

Bypass tray (on the machine) Bypass tray (on the large capacity trays)

Left

Place the first sheet of tab paper so that the tab faces

toward you.

Place the first sheet of tab paper so that the tab faces

toward you.

Right

Place the first sheet of tab paper so that the tab faces

away from you.

Place the first sheet of tab paper so that the tab faces

away from you.

• Use only tab paper that is made of paper. Tab paper made of a material other than paper (film, etc.) cannot be used.

• To copy onto the tabs of tab paper, [Tab Copy] in "Others" is useful.

• Use SHARP-recommended transparency film.

• When loading multiple sheets of transparency film into the bypass tray, fan the sheets several times before loading.

• When printing on transparency film, remove each sheet as it is printed and output from the machine. Allowing sheets to

stack in the output tray may result in curling.

Side 2