Operation Manual, User's Manual
2-75
COPIER►OTHER FUNCTIONS
MAKING A PROOF COPY (PROOF COPY)
This function makes a proof copy before printing the specified number of copies. Check the preview image with a proof
copy. If necessary, change the settings. Using this function stores the scanned original in the machine, saving you the
trouble of re-scanning the original in the changed setting.
Proof copy flow
• Proof Copy must be specified before scanning the original.
• If Proof Copy is executed while the machine is printing another job, the job in progress is interrupted, and a proof copy is
printed preferentially. The interrupted job will resume after proof copying has been completed.
However, if proof copy is executed during printing of a job for which both 2-sided printing and staple function are enabled,
the proof copy will be printed after the job in progress is finished.
If the [Start Print] key is tapped to execute printing of the remaining sets while the machine is printing another job, the
remaining sets will be printed after all previously reserved jobs are completed.
1
As necessary, specify the required functions such as "Exposure" and "Copy
Ratio".
2
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER
(page 1-127)
► DOCUMENT GLASS (page 1-131)
To cancel all settings:
Tap the [CA] key.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
One set of copies is
printed for you to check
Select "Proof Copy" and
set 5 sets of copies
The remaining 4 sets are printed
Adjust the settings
The remaining 4 sets are
printed
After adjustment, one set
is printed for you to
check
If OK