Operation Manual

15
E
Caution
Turn on the monitor rst before turning on the PC or
playback device.
Turning on the main power
Main power switch
Caution
The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
For a complete electrical disconnection, pull out the main
plug.
Turning Power On/Off
Turning power on/off
Press the POWER button or POWER switch to turn the power
ON/OFF.
Power LED
Status Status of the monitor
Green lit Power on
Orange lit Power off (Standby mode)
Green ashing Input signal waiting mode
Caution
When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.
TIPS
When the main power switch is off, the monitor cannot be
turned on.
If the monitor is in the input signal standby mode and you
press the POWER button on the remote control unit, the
monitor enters standby mode.
Setting the SCHEDULE ashes the power LED alternately
in red and orange in standby mode.
To disable the logo screen from displaying when turning
the power ON, set LOGO SCREEN to OFF on the SETUP
menu. (See page 22.)