Operation Manual, User's Manual

7-105
SETTING MODE►SYSTEM SETTINGS
Client Port
• HTTPS: Apply SSL encryption to HTTP communication.
• FTPS: Apply SSL encryption to FTP communication.
• SMTP-SSL: Apply SSL encryption to SMTP communication.
• POP3-SSL: Apply SSL encryption to POP3 communication.
• LDAP-SSL: Apply SSL encryption to LDAP communication.
• Verify Signature of Server Certificate of the Other Party: Check the certificate of the communication destination
server.
• Use only TLS 1.2: Only use TLS 1.2.
Level of Encryption
The encryption strength can be set to one of three levels.
Device Certificate
Certificate Status
Shows the status of the certificate required for transmission using SSL. To install a certificate, click [Select].
Certificate Information
When a device certificate is installed, click the [Show] key to display the certificate information.
Select Device Certificate
When the [Select] key is clicked , the already registered device certificate will be displayed and select from registered
device certificates.
S/MIME Settings
Condition Settings
Set whether S/MIME is used for transmission.
Device Certificate
Certificate Status
Shows the status of the certificate required for transmission using S/MIME. To install a certificate, click [Select].
Sign Settings
Sign E-mail
Enable "Sign E-mail" to use a signature.
Signature Algorithm
Set the algorithm for the signature.