Operation Manual, Software Setup Guide

Table Of Contents

Using the IPP function or SSL function to print

To use the SSL function, please setup the "SSL Settings" of this machine. For instructions, please download the manual from the website of the

machine.

When you are asked how the printer is

connected, select [Use an IPP or IPPS port] and

click the [Next] button.

Refer to "Custom installation (page 7)" on how to display the

custom installation screen.

If a proxy server is used, specify the proxy server

and click the [Next] button.

To specify a proxy server, select [Print via the following proxy

server] and then enter the [Address] and [Port number].

Enter the machine's URL and click the [Next]

button.

Enter the URL in the following format:

Normal format:

http://<the machine's domain name or IP address*

>:631*

/ipp

When SSL is used:

https://< the machine's domain name or IP address

>:<port number*

>/ipp

*1 When entering an IPv6 address, enclose the IP address

with brackets [ ].

Example: IP address 2001:1::a →

http://

[2001:1::a]:631/ipp

*2 Normally "631" should be entered for the port number. If

the IPP port number has been changed on the machine,

enter the new port number.

*3 Normally the port number and the colon ":" immediately

preceding the port number can be omitted. If the IPP port

number for SSL has been changed on the machine, enter

the new port number.

Follow the instructions on the screen and

proceed with installation.

For detailed procedures, refer to Step 3 onwards of "Installation by

specifying the machine's address (page 8)".

This compl

etes the installation.

• If your computer and the machine are connected to the

same local area network, you can click the [Search] button

to search for the machine. The machine's URL will appear.

Select the URL and click the [Next] button.