Operation Manual

Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. Connecting Other
Devices
1. Connecting 8K Output-
compatible
Device/Quad-screen
display（4K or less)
5. Connecting 4K Output-
compatible Device
7. Viewing HDR Video
(INPUT1, INPUT7,
INPUT8)
9. Using the HDMI CEC
11. Connecting Recorder,
Player, etc.
21. Connecting Audio
Device
22. Connecting PC
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
＞
＜
Connecting Other Devices
Connecting 8K output compatible Device/Quad-screen display（4K or less)
How to change the display position in Mode3/4
• In mode 3, press the button for the input you want to display at the top left.
The display position of the selected screen and the upper left screen change.
• In mode 4, press the button for the input you want to display at the left side.
The display position of the selected screen and the left side screen change.
INPUT7-A:F1, INPUT7-B:F2, INPUT7-C:F3, INPUT7-D:F4
• To return initial display position, press CLEAR.
Supported audio sound signals
• Type: Linear PCM
• Sampling frequency: 48kHz / 44.1kHz / 32kHz
How to change the input audio sound in Mode2/3/4
• Press MENU, followed by / / / and ENTER to select "Setup" - " (Option)" - "Terminal setting" -
"INPUT7 audio setting", then select input for audo sound.
NOTE
•When "Audio input terminal" has been selected for "INPUT7 audio setting", no sound will come out of the
Monitor if you connect between the Monitor and a typical HDMI compatible device using an HDMI cable instead
of an analog audio cable. (An analog audio cable needs to be connected)
To connect the Monitor to a HDMI compatible device using an HDMI cable alone, select the input to which the
device has been connected in "INPUT7 audio setting".
5-4
5/27/2020 Sharp operation manual