Operation Manual, User's Manual

7-63
SETTING MODESYSTEM SETTINGS
PCL Settings
This is used to set the symbol sets, fonts, and line feed code used in a PCL environment.
Settings
Setup Items Settings Setting
PCL Symbol Set Setting Specify the symbol set used for printing. Select from 35 items.
PCL Font Setting Select a font used for printing.
Internal Font
Extended Font
(List of internal fonts when
extended fonts are not
installed.)
PCL Line Feed Code
This setting is used to select how the printer responds when a line
feed command is received.
0.CR=CR; LF=LF; FF=FF
1.CR=CR+LF;
LF=LF;FF=FF
2.CR=CR; LF=CR+LF;
FF=CR+FF
3.CR=CR+LF; LF=CR+LF;
FF=CR+FF
Wide A4
When this is enabled, 80 characters per line are printed on the A4
(8-1/2" x 11") size paper using a 10-pitch font. (When this setting is
disabled, up to 78 characters are printed per line.)
(Enabled)
(Disabled)