Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- System Requirements
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Affixing the Stand Hole Protection Covers
- Preparing the Remote Control Unit
- Removing the Handles (PN-80SC5/PN-70SC5 only)
- Mounting a web camera
- Turning Power On/Off
- Touch action
- Basic Operation
- Menu Items
- Functional Restriction Setting (FUNCTION)
- Controlling the Monitor with a PC (RS-232C)
- Troubleshooting
- Specifications
- Mounting Precautions (For SHARP dealers and service engineers)
23
E
16. BRIGHT +/- (Brightness adjustment)
When the menu does not appear, press + or - to display the
brightness menu and adjust the brightness.
* If you do not press any buttons for about 3 seconds, the
brightness menu automatically disappears.
17. INPUT (Input mode selection)
The menu is displayed. Press
or buttons to select the
input mode, and press ENTER button to enter.
* You can select the input mode by pressing the input button.
Input mode Video
HDMI1 HDMI1 input terminal
(INPUT1)
HDMI2 HDMI2 input terminal
(INPUT2)
HDMI3 HDMI3 input terminal
(INPUT3)
INPUT4
AV component input terminals (INPUT4)*
D-SUB (PC) D-sub input terminal
(INPUT5)
* INPUT4 can also be used as an AV video input terminal.
(See page 13.)
• For audio, an audio input terminal is selected that is
compatible.
18. MENU
Displays and turns off the menu screen. (See page 26.)
19. Cursor
These buttons are used to perform operations such as
selecting items, changing adjustment values, and moving the
cursor.
20. RETURN
Returns to the previous screen.
21. HDMI1
Switch the input mode to HDMI1.
22. D-SUB
Switch the input mode to D-SUB (PC).
23. Backlight OFF
Turns off the backlight. The touch panel is enabled while the
backlight is off and touch actions can be reected.
When off, the backlight turns on when you press any button
(excluding ID SET) on the monitor or remote control.
Basic Operation