MODEL LC-60LE830E LC-60LE830RU LC-60LE831E LC-60LE831S OPERATION MANUAL LCD COLOUR TELEVISION LC-52LE830E LC-52LE830RU LC-52LE831E LC-52LE831S
CE Statement: Hereby, SHARP Electronics (Europe) GmbH declares that the wireless LAN USB adapter (WN8522D 7-JU) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at: http://www.sharp.de/doc/ WN8522D_7.pdf. NOTE The wireless LAN USB adapter is designed for indoor use only.
[ ENGLISH ] Introduction Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read Important safety precautions carefully before using this product. Contents Introduction............................................................. 1 Dear SHARP customer ....................................... 1 Contents .............................................................
Introduction Important safety precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in the cabinet of the TV. • Headphones—Do not set the volume at a high level.
Introduction Caring for the front panel • Turn off the main power and unplug the AC cord from the wall outlet before handling. • Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel. • Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
Introduction Supplied accessories Remote control unit ( x 1) Optional accessories LR03 (“AAA” size alkaline) battery ( x 2) Cable tie ( x 1) The listed optional accessories are available for this LCD colour TV. Please purchase them at your nearest shop. • Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability. No.
Preparation Attaching the stand unit • Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged. 3 Insert the stand into the openings on the bottom of the TV (hold the stand so it will not drop from the edge of the base area). 5 Attaching the stand cover. 1 Insert the stand cover. 2 Insert and tighten the short screw(s) into the • Make sure that the stand is firmly inserted into the TV.
Preparation Using the remote control unit Inserting the batteries Before using the TV for the first time, insert the two supplied LR03 (“AAA” size alkaline) batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new LR03 (“AAA” size alkaline) batteries. Angle of the remote control unit Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control unit and sensor may prevent proper operation.
Part names and functions TV (front view) TV (rear view) — continued MAIN POWER switch*4 Illumination LED*1 SD CARD (VIDEO STORE) slot 3D infrared emitter*2 OUTPUT (Headphones/ AUDIO (L/R)) terminal*5 USB 1 port HDMI 1 (HDMI/ARC) terminal OPC sensor Remote control sensor I J HDMI 2 (HDMI) terminal 3D mode: Blue illumination 2D mode: White illumination This panel emits infrared signal towards the 3D glasses you wear when viewing 3D images.
Part names and functions Remote control unit 1 2 3 15 16 4 5 6 7 17 8 18 9 10 11 19 20 12 21 13 14 22 23 24 1 >a (Standby/On) (Page 19) 2 ATV Access conventional analogue TV mode. DTV Access digital TV mode. SAT Access satellite mode. RADIO DTV/SAT: Switch between radio and data mode. • When only data broadcasting (no radio broadcasting) is transmitted by DVB, the radio broadcasting will be skipped.
Quick guide Operation overview Follow the steps below one by one when using the TV. Some steps may not be necessary depending on your TV installation and connection. 1. Preparation - Connecting the TV 2. Preparation - Setting the TV p s Turn on the power using
Quick guide 3. Watch TV - Daily operation 4. Watch TV - Advanced features 5. Enjoy additional features 1 Turn on/off the TV 1 Use Time shift function 1 Enjoy internet service* with the TV (Page 19) (Pages 48_50) (Pages 60_64) * The following service is now available: • You can turn on/off the power using both the remote control and the TV control panel.
Quick guide Inserting the CA card into the CI module In order to receive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the CI slot of the TV. 1 Carefully insert the CI module in the CI slot with the contact side forward. 2 The logo on the CI module must be facing outward from the rear of the TV. Checking CI module information Go to “Menu” > “Setup” > “Option” > “CI menu”.
Quick guide Using the Menu screen You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “Menu”. The “Menu” enables various settings and adjustments. LCFONT Tips: Selecting in the Menu This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens. Basic operation Press c/d to select the desired menu, and then press ;. Press 6 to return to the previous menu category.
Quick guide Using Software keyboard Use the software keyboard when you need to input text. 6 Char.Set 1 1 2 3 4 5 8 7 2 Caps 3 Done 4 Cancel 5 Cursor Left Char. Set Changes character set into the alphabet, numbers, symbols, etc. Caps Changes characters to capital/lower case. Done Confirm the entry. Cancel Abort input and close the software keyboard. R/G/Y/B (Colour) buttons Selects the coloured items on the screen. 9 SP Caps Char.
Initial auto installation 4 Setting the country. Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. Confirm the following before turning on the power E Is the antenna cable connected? E Is the AC cord plugged in? E Is the MAIN POWER switch turned on (;)? Satellite services are only available for the 830 model series.
Initial auto installation 3 Press a/b to select “Search start”, and then Digital broadcast setting Press c/d to select “Terrestrial” or “Cable”, and then press ;. 4 5 Terrestrial E Cable Searching for terrestrial broadcasts The TV searches for, sorts and stores all the receivable TV stations according to their settings and the connected antenna. • To abort the initial auto installation in progress, press 6. press ;. Press c/d to select “Yes” to start searching cable broadcasts, and then press ;.
Initial auto installation Searching for satellite broadcasts (830 series only) 1 When you change the antenna connection setting: Press c/d to select “Change setting”, and then press ;. Press c/d to select “Yes”, and then press ;. Yes 3 Press a/b/c/d to select your favorite satellite, and then press ;. • You cannot select “Next” unless you set the satellite broadcast in step 3. • The antenna connection setting screen is displayed.
Initial auto installation 7 Press a/b to select “OK”, and then press ;. After completing this setting, the screen switches to the DVB-S/S2 setting screen shown in the left column on page 16. NOTE • Follow the instructions on the screen for “2 satellites on 22kHz switchbox”, “2 satellites on toneburst switchbox”, “Max. 4 satellites on DiSEqC multiswitch” and “Communal satellite system” settings. • To set multiple satellite channels, go to “Max. 4 satellites on DiSEqC multiswitch”.
Initial auto installation Checking signal strength and channel strength (DVB-T/T2*1/C/S*2/ S2*2) If you install a DVB-T/T2/C/S/S2 antenna for the first time or relocate it, you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen. I J 831 series only 830 series only E 4 Press a/b to select “Channel strength”, and then press ;. • You can input a specified frequency band using the 0_9 numeric buttons.
Watching TV Daily operation Switching on/off Turning on/off the power NOTE • If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet or turn off (a) the MAIN POWER switch on the rear of the TV (Page 7). • A small amount of electric power is still consumed even when the MAIN POWER switch is turned off (a) (Page 7).
Watching TV Selecting a sound mode E DTV/SAT mode If multi sound modes are received, each time you press 7 the mode switches as follows. Audio (ENG) L/R STEREO L R Audio (ENG) CH A CH B Audio (ENG) LR CH A CH AB A2 TV broadcasts selection Signal Selectable items Stereo STEREO, MONO Bilingual CH A, CH B, CH AB Monaural MONO NOTE • When no signal is input, the sound mode will display “MONO”. Channel display You can display the channel information by pressing p on the remote control unit.
Watching TV EPG Option EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule for DTV/SAT/RADIO/DATA, view detailed information about them and tune to an event currently on-air. Useful settings for using EPG View setting EPG If you want to use the EPG for digital stations, select “Yes”. The EPG data must be automatically captured while the TV is in standby mode.
Watching TV Selecting a programme using EPG 4 Search a programme in a category 5 Search for a programme by date/time 1 Press G. 2 Press a/b to select the desired 1 Press Y. 2 Press c/d to select the desired The illustrations on this page are explained using three digit services. Display/Close the EPG screen Press EPG. AM Programme info. PM Search by genre Search by date Timer list 3 genre, and then press ;. Press a/b to select a programme you want to watch, and then press ;.
Watching TV Timer setup using EPG Teletext You can switch to a programme at a set time. 1 Press EPG. 2 Press a/b/c/d to select the programme you want to set, and then press ;. Programme info. Back to EPG Teletext broadcasts pages of information and entertainment to specially equipped TV. Your TV receives teletext signals broadcast by a TV network, and decodes them into graphical format for viewing.
Connecting external devices Introduction to connections ø 3.5 mm stereo minijack cable The TV is equipped with the terminals as shown below. Find the cable corresponding the TV’s terminal and connect the device. E Before connecting ... HDMI device (Page 25) DVI/HDMI cable HDMI-certified cable • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals.
Connecting external devices DVI/HDMI conversion Video connections Using a DVI/HDMI cable, the digital video signals of a DVD can also be played via the compatible HDMI connection. The sound must be fed in additionally. HDMI connection • When connecting a DVI/HDMI cable to the HDMI terminal, the image may not come in clearly. • Both HDMI and DVI use the same HDCP copy protection method.
Connecting external devices SCART connection Y Example of connectable devices PB (CB) PR (CR) Component connection Example of connectable devices E VCR E DVD player/recorder E VCR E DVD player/recorder You will enjoy accurate colour reproduction and high quality images through the EXT 3 terminal when connecting a DVD player/recorder or other device.
Connecting external devices Audio connections VIDEO connection Speaker/amplifier connection Example of connectable devices E E E E VCR DVD player/recorder Game console Camcorder Connect an amplifier with external speakers as shown below. E Connecting an amplifier with digital/analogue audio inputs n You can use the EXT 2 terminal when connecting to a game console, camcorder, a DVD player/recorder or other device.
AQUOS LINK Controlling HDMI devices using AQUOS LINK E What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit. NOTE • AQUOS LINK-compatible AQUOS AUDIO speaker system and AQUOS recorder are scheduled to be on sale after the release of this TV. • AQUOS LINK does not work while using time shift functions.
AQUOS LINK AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD player/ AQUOS recorder that supports the HDMI CEC protocol.
AQUOS LINK AQUOS LINK setup Basic operation Go to “Menu” > “Link operation” > “AQUOS LINK setup” > select the menu you want to set. AQUOS LINK control Set to “On” to enable HDMI CEC functions. Auto power on If this is activated, the one touch play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. NOTE • The factory default for this item is “Off”. Operating an AQUOS LINK device Using genre info.
AQUOS LINK Top menu/title list This section explains how to play back a title in the AQUOS BD player/AQUOS recorder. 1 Press a/b to select “Top menu/title list”, and then press ;. • The linked recorder now powers on and the TV automatically selects the appropriate external input source. • The title list data from the connected AQUOS BD player/AQUOS recorder displays. 2 Press @ to hide the menu screen to operate a/b/c/d buttons. 3 Select the title with a/b/c/d, and then press PLAY I.
Basic adjustment Picture settings Go to “Menu” > “Setup” > “Picture”. AUTO Menu CH list :Enter Setup STANDARD :Back MOVIE Picture GAME PC*1 AV mode OPC [Off] Backlight 3D brightness boost USER x.v.Colour*2 [Middle] DYNAMIC Picture AV mode DYNAMIC (Fixed) “AV mode” gives you several viewing options to choose from to best match the system environment, which can vary due to factors like room-brightness, type of programme watched or the type of image input from external equipment.
Basic adjustment Picture Advanced This TV provides various advanced functions for optimising the picture quality. Go to “Menu” > “Setup” > “Picture” > “Advanced”. Colour temp. Adjusts the colour temperature to give the best white image. High Mid-High C.M.S.-hue Middle This function adjusts the hue of a selected colour using a six-colour adjustment system. C.M.S.-saturation This function increases or decreases the saturation of a selected colour using a six-colour adjustment system. C.M.S.
Basic adjustment Monochrome For viewing a video in black & white. Range of OPC The brightness level range of the OPC sensor’s automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of e 16 and a minimum of f 16. NOTE • This function is available only when the “OPC” setting is set to “On” or “On:Display”. • The maximum setting cannot be set to a smaller number than the minimum setting.
Basic adjustment Audio settings Go to “Menu” > “Setup” > “Audio”. Menu Setup CH list :Enter Audio Audio Audio adjustment Clear voice You can adjust the sound quality to your preference with the following settings.
Basic adjustment Power save settings Go to “Menu” > “Setup” > “ECO”. Menu CH list :Enter Setup :Back ECO ECO ECO Energy save No operation off This function enables you to reduce the backlight brightness in order to decrease the power consumption and increase the backlight life span as shown in the following table. Standard Advanced ECO picture control [On] Energy save [Off] Off No signal off Item Reduces the backlight brightness. Reduces the backlight brightness more than “Standard”.
Basic adjustment 4 Press a/b to select the broadcast standard View settings you want to search, and then press ;. Go to “Menu” > “Setup” > “View setting” E :Enter Setup :Back E Auto installation Quick start Individual setting Analogue search The TV searches for, sorts and stores all the receivable TV stations. Refer to Analogue broadcast setting on page 15.
Basic adjustment Buttons for “Manual adjust” operation Press R button. Lock When the service is locked, you must enter your PIN whenever you tune to the service. CH skip Press G button. Services with a ✔ mark are passed over when pressing :r/s on the TV or remote control unit. Delete Press Y button. The selected service is deleted. If you want to watch the service you deleted once again, perform “Auto installation”, “Additional search”, or “Manual search”. Sort Press B button.
Basic adjustment Analogue setting You can reconfigure the analogue TV channels settings automatically or manually. E Additional search Use this menu to add new services automatically after “Analogue search” in the “Auto installation” menu has been completed. • Start searching channels after selecting the colour system and sound system. E Manual adjust Use this menu to set up analogue TV channels manually.
Basic adjustment TV start-up time setting View setting Quick start You can reduce the TV’s start-up time after turning on the power with the remote control unit. Go to “Menu” > “Setup” > “View setting” > “Quick start”. Item The TV quickly starts up from standby. 14 W or more of power consumption is required during standby. Power consumption is small during standby. On Off Individual setting - PIN View setting PIN Allows you to use a PIN to protect certain settings from being accidentally changed.
Basic adjustment Individual setting - Language View setting Digital audio language Set up to three preferred multi audio languages to display if the audio languages are available. Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Digital audio language”. E Switching the multi audio languages Each time you press 7 on the remote control unit, the audio language switches.
Useful viewing functions NOTE Optional features settings Go to “Menu” > “Setup” > “Option”. Menu CH list :Enter Setup :Back Option Option for view 3D setup AQUOS LINK setup Terminal setting Selecting the picture size manually Option Wide mode You can select the picture size. Selectable picture size varies with the type of signal received. 1 Go to “Menu” > “Setup” > “Option” > “Option for view” > “Wide mode”. • You can also select an item by pressing f on the remote control unit.
Useful viewing functions Selecting the WSS picture size manually Terminal setting Skipping specified inputs Option Option Option 4:3 mode Audio select Input skip The “WSS” signal has 4:3 auto-switching that allows you to select between “Normal” and “Panorama”. Go to “Menu” > “Setup” > “Option” > “4:3 mode”. Normal Panorama Item Normal range keeping 4:3 or 16:9 aspect ratio. Wide image without side bars.
Useful viewing functions Input source settings Option CH list Headphone/Audio out select Option Input select For setting the signal type of external equipment. 1 Press b to select the input source for setting the input signal (“EXT1”) from the “INPUT” menu, and then press ;. 2 Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Input select”. Item Y/C, CVBS, RGB EXT1 You can select which device is used for outputting audio.
Useful viewing functions Screen effect settings Option Channel selecting effect This function shows a screen effect when choosing or changing channels. Go to “Menu” > “Setup” > “Option” > “Screen effect” > “Channel selecting effect”. NOTE • Adjustments are stored separately for each input source. • Depending on the input signal type, “Wide mode” setting or “Video mode” for the USB media mode, a position setting may not be available. • This function is not available for DTV broadcasts with MHEG signals.
Useful viewing functions Additional features Option Illumination This function makes the LED on the front of TV illuminated in several ways. Go to “Menu” > “Setup” > “Option” > “Illumination”. Off Standby Watch Always Item The LED is not illuminated. The LED is illuminated while the TV is in standby mode. The LED is illuminated while you watch TV. The LED is illuminated all the time. NOTE • The factory default for this item is “Watch”. Set to “Off” if you do not want the LED to illuminate.
Other useful features NOTE Using a USB device The TV provides you some functions using a USB device. You can select which function to use after inserting a USB device in the USB port, and the TV starts the settings for each function. USB usage • Storage device for time shift • USB media to enjoy photos, music and videos Connecting a USB device Connect a USB device to the TV as shown below. • When you want to configure a software update, you need to press > to close the window.
Other useful features Time shift This function enables you to pause the digital TV or satellite programme you are watching and start watching it again from the paused scene. Buttons for time shift operation Buttons READY I H 1 Press READY. • The TV starts temporary recording of the real time broadcast in the background. 2 Press I. • The TV shows the programme from the scene that the TV started recording and the recording carries on.
Other useful features Examples of time shift usage When you move away from the TV for a while (press READY when you move away from the TV) Channel display Channel information displays by pressing p on the remote control unit. Without time shift Away You miss the scene while you are away. With time shift Audio (ENG) STEREO Video Subtitle Off >> New information Away You can watch the missed scene when you come back.
Other useful features Option Device registration You need to perform this function to register the USB storage device for the time shift. Go to “Menu” > “Setup” > “Option” >“Time shift setting” > “Device registration”. • Refer to For time shift (Page 47) for registering a USB storage device. NOTE • Only one USB storage device can be registered for time shift. Remove all USB storage devices except the one used for time shift. • At least 1 GB is required for a USB storage device for time shift.
Other useful features USB media/Home network USB media/Home network In both modes, you can enjoy viewing photos, listening to music and watching videos from external USB devices (USB Memory, USB card reader (Mass Storage Class), USB HDD) or Home network server. NOTE • To connect a Home network server, refer to Network setup (Page 60). • Some USB devices may not work properly for this function. • The corresponding file format is different between “USB media” and “Home network”.
Other useful features Viewing enlarged photos Buttons for slide show BGM select operation Buttons Buttons for enlarged photo display operation (When using USB media mode) Buttons c/d (Cursor) 6 3D R button G button B button p Description Go to the previous/next photo in the same directory. Return to the thumbnail selection screen. Switch between 2D and 3D modes. Rotate the photo by 90 degrees to the left. Rotate the photo by 90 degrees to the right. Display “USB media menu”.
Other useful features Music mode Video mode Buttons for file selecting operations (When using USB media mode) Buttons ; * This screen image is for the USB media mode. It may be slightly different in the Home network mode. Buttons for music mode (When using USB media mode) Buttons ; a/b/c/d (Cursor) 6 R button G button Y button B button Description When selecting a music file: Play music. Select a desired item. When music is stopped: Return to the previous operation.
Other useful features Video file format View setting DivX® setup File extension This is the function to confirm your registration code. You need to register the code at www.divx.com. Go to “Menu” > “Setup” > “View setting” > “DivX® setup”. E DivX® VOD registration You can find your registration code on this menu. You need to register the TV at www.divx.com before playing the DivX content. E DivX® VOD deregistration You can find your deregistration code on this menu. You need to deregister the TV at www.
Connecting a PC Connecting a PC PC HDMI connection PC Displaying a PC image on the TV Analogue connection PC terminal* Selecting the picture size You can select the picture size. 1 Press f. HDMI 1, 2, 3 or 4 terminal • The “Wide mode” menu displays. 2 Press f or a/b to select the desired item. HDMI-certified cable (commercially available) PC RGB cable (commercially available) PC ø 3.
Connecting a PC Adjusting the PC image automatically Adjusting the PC image manually Option Fine sync. Option Auto sync. This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc. 1 Press b to select “PC” from the “INPUT” menu, and then press ;. 2 Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “PC signal setting” > “Auto sync.”.
Connecting a PC PC compatibility chart Resolution Horizontal frequency Vertical frequency Analogue (D-Sub) Digital (HDMI) VESA standard VGA 640 x 480 31.5 kHz 60 Hz ✔ ✔ ✔ SVGA 800 x 600 37.9 kHz 60 Hz ✔ ✔ ✔ XGA 1,024 x 768 48.4 kHz 60 Hz ✔ ✔ ✔ WXGA 1,360 x 768 47.7 kHz 60 Hz ✔ ✔ ✔ 64.0 kHz 60 Hz ✔ ✔ ✔ 65.3 kHz 60 Hz ✔ ✔ ✔ 75.0 kHz 60 Hz ✔ ✔ ✔ 67.
Connecting a PC PC control of the TV • When a programme is set, the TV can be controlled from the PC using RS-232C or IP. The input signal (PC/ video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Use an RS-232C serial control cable (cross type), ETHERNET cable (commercially available) or wireless LAN USB adapter for the connections.
Connecting a PC Command list CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS POWER SETTING P O W R 0 INPUT SELECTION A I CHANNEL T G D _ _ _ _ _ POWER OFF (STANDBY) AV MODE SELECTION _ INPUT SWITCHING (TOGGLE) _ _ _ TOGGLE A C S U 0 _ _ _ SURROUND TOGGLE A V M D 1 _ _ _ STANDARD A C S U 1 _ _ _ SURROUND ON A V M D 2 _ _ _ MOVIE A C S U 2 _ _ _ SURROUND OFF A V M D 3 _ _ _ GAME A C S U 4 _ _ _ SURROUND 3D HALL A V M D 4 _ _ _ USER A C S U 5 _ _ A V M D 5 _
Network setup Connecting to the network To enjoy internet services, you need to connect the TV to a router with a high speed connection to the internet. You can also connect the TV to your Home network server through a router or access point. The TV connection to the router can either be wired or wireless. 4 Press c/d to select “Wired”, and then press Wired installation ;. Use an ETHERNET cable to connect the ETHERNET terminal on the TV to your broadcast router as shown below.
Network setup Wireless installation Use the wireless LAN USB adapter supplied with the TV. E Wireless connection overview 1 Switch on your router before starting the 2 network installation. Connect the wireless LAN USB adapter (supplied) to the USB 3 (WIRELESS LAN) port on the rear of the TV. • Do not use a wireless LAN adapter other than the supplied SHARP wireless LAN adapter, as operations cannot be guaranteed.
Net TV What is Net TV? Net TV offers internet service and websites tailored for your TV. Use the TV remote control unit to browse the Net TV internet pages. Net TV allows you to play movies, view pictures, listen to music, play games, rent a movie from a video store* and much more. Net TV provides variety of services for each country. You can browse other countries’ service as well. If a service is unsuitable for children, you can lock it as needed.
Net TV E Reload Refreshes the page you are browsing. If an error occurs while loading the page, execute this function and reload it. Select “Reload”, and then press ;. E Zoom Adjusts the display size of the page you are browsing. Zoom [100] 20 ：Adjust 400 END :Exit 1 Select “Zoom”, and then press ;. 2 Press c/d to adjust the display size. 3 Press > to exit. E Security info. Shows information regarding the security of the page you are browsing. 1 Select “Security info.”, and then press ;.
Net TV Disclaimers and software licences for Net TV DISCLAIMERS • • • This product includes the Opera™ browser. • This product contains fonts provided by Monotype Imaging Inc. • Monotype® is a trademark of Monotype Imaging Inc. registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions. • Tioga™ is a trademark of Monotype Imaging Inc. and may be registered in certain jurisdictions. • Letter Gothic™ is a trademark of The Monotype Corp.
Enjoying 3D image viewing You can enjoy 3D-supported images on the TV when you wear 3D glasses (AN3DG10-S/R/A), sold separately. Part name NOTE 6 5 1 • Some menu items are greyed out in 3D mode. This is not a malfunction. 3 4 Preparing for the 3D glasses 2 Confirm how to use the 3D glasses before watching 3D-supported images. These 3D glasses are only for use with SHARP LCD TVs supporting 3D.
Enjoying 3D image viewing Replacing the button cell battery 3 When the battery comes loose from the socket, pick it out with your fingers. The battery has an expected service life of approximately 75 hours. Turn on/off the power • When the battery power is low, the LED light blinks six times after the power is turned on. • When replacing the button cell, use only the designated battery type (Hitachi Maxell: CR2032 lithium button cell).
Enjoying 3D image viewing Angle of the 3D glasses The 3D glasses can be used by receiving an infrared signal sent from the TV. The 3D glasses turn off automatically after three minutes if no signal is received from the TV. Operating range Attaching the 3D glasses band Attach the supplied 3D glasses band strap as needed (such as when the glasses do not fit properly). Insert the ends of the 3D glasses into the 3D glasses band until they are secure.
Enjoying 3D image viewing • When viewing 3D images, keep the 3D glasses horizontally level with the TV screen. If you tilt the 3D glasses with respect to the TV screen, the images viewed by the left and right eyes may appear significantly different or images may appear overlapping. • View 3D images at the appropriate distance from the TV screen. The recommended distance is three times the effective height of the TV screen. Viewing should not be done closer than the recommended distance.
Enjoying 3D image viewing Viewing 3D images 2 Turn on the power of the 3D glasses, and then wear the 3D glasses. • Press the power button for at least two seconds. • The LED light blinks three times. 2 Press c/d to select “3D” or “2D”, and then press ;. E 1 Press c/d to select the 3D signal type (“2D NOTE s 3D”,“Side by Side” or “Top and Bottom”), and then press ;. • If you do not want to switch to 3D mode automatically, set “3D auto change” to “No”.
Enjoying 3D image viewing Watching 2D images in 3D You can convert normal 2D images into 3D images. 1 Press 3D. 2 Press c/d to select “2D s 3D”, and then press ;. 3 Turn on the power of the 3D glasses, and then wear the 3D glasses. 3D Menu Pressing 3D in 3D mode displays the 3D menu. Press the coloured buttons to make the necessary settings. Configuring the TV settings to enhance 3D image viewing You can make various settings to enhance 3D image viewing.
Enjoying 3D image viewing 3D brightness boost You can adjust the backlight of the TV for 3D image viewing. High Item The screen brightens Middle Low The screen dims NOTE • When “High” or “Low” is selected, “OPC”, “Backlight” and “Range of OPC” are not available. • The “3D brightness boost” is not available for 2D mode. • The “3D brightness boost” items can be saved for every 3D “AV mode” item (“STANDARD (3D)”, “MOVIE (3D)”, “GAME (3D)”).
Enjoying 3D image viewing Specifications - 3D Glasses (sold separately) 3D glasses AN-3DG10-S/AN-3DG10-R/AN-3DG10-A Liquid crystal shutter 3 V DC Lithium button cell (CR2032 × 1) Approx. 75 hours of continuous use 172.7 × 47.5 × 170.0 mm 65.0 g (including the lithium button cell) 10°C to 40°C (The 3D glasses cannot operate fully at extreme high or low temperatures. Use them within the specified usage temperature range).
Enjoying 3D image viewing 3D glasses lenses • Do not apply pressure to the lenses of the 3D glasses. Also, do not drop or bend the 3D glasses. • Do not scratch the surface of the lenses of the 3D glasses with a pointed instrument or other object. Doing so may damage the 3D glasses and reduce the quality of 3D images. • Use only the cloth provided with the 3D glasses to clean the lenses.
Appendix Troubleshooting Problem • No power. • The TV cannot be operated. • Remote control unit does not operate. Possible solution • Turn on (;) the MAIN POWER switch on the rear of the TV (Page 19). • Is the AC cord disconnected? • Check if you pressed
Appendix Updating your TV via DVB-T/T2* 2 Follow the screen prompts. Ensure that your TV software version is always up to date. From time to time SHARP will make updated TV base software and DVB software available. * 831 series only Yes View setting Download setup Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Standby search” > “Download setup”. Searching for updates* * All countries except UK, Sweden and Italy are set to “No” for this function.
Appendix Information on the software licence for this product Information Software licence You can read the software licences in this menu. Go to “Menu” > “Setup” > “Information” > “Software licence”. E Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
Appendix Warning regarding basic use Trade marks Cautions regarding use in high and low temperature environments • “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.” • When the TV is used in a low temperature space (e.g., room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the TV will recover when the temperature returns to normal.
Appendix Specifications Item LCD panel Resolution Video colour system TV TVfunction standard HDMI 1 (EXT 4) HDMI 2 (EXT 5) HDMI 3 (EXT 6) HDMI 4 (EXT 7) USB 1 USB 2 (HDD) USB 3 (WIRELESS LAN) ETHERNET (10/100) HDMI 2/PC AUDIO (L/R) DIGITAL AUDIO OUTPUT C. I.
Appendix Specifications (Wireless LAN USB adapter) Product name Standard Host interface Frequency band Dual Band 802.11n USB2.0 adapter IEEE 802.11a/b/g/n USB2.0 2412_2484 MHz 5150_5850 MHz Security Static WEP (64/128 bit, key index 1 only) WPA-PSK (TKIP) WPA2-PSK (AES) Modulation DBPSK@1 Mbps DQPSK@2 Mbps CCK@5.5/11 Mbps BPSK@6/9 Mbps QPSK@12/18 Mbps 16-QAM@24 Mbps 64-QAM@48/54 Mbps and above, Rx up to 300 Mbps Transmit Tx 2.4 GHz 11b 17 e/_ 1.5 dBm power and output 11g 14 e/_ 1.
Appendix Environmental specifications Item Mounting the TV on a wall 60 inch models 52 inch models I On-Mode (W) (HOME MODE) 112 W 89 W J Energy-Save-Mode (W) Advanced 85 W 69 W 0.20 W 0.20 W 0.01 W or less 0.01 W or less 164 kWh 130 kWh 124 kWh 101 kWh K Standby-Mode (W) L Off Mode (W) MAIN POWER switch M Annual Energy Consumption (kWh) Annual Energy Consumptioning Advanced N Energy-Save-Mode (kWh) I J K L M N Measured according to IEC 62087 Ed.
Appendix Abbreviation list Rating table for child lock Broadcasted rating User-adjusted rating AGE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Universal viewing ✔ — — — — — — — — — — — — — — Parental approval pref. ✔ ✔ ✔ ✔ ✔ — — — — — — — — — — X-rated ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Broadcasted rating User-adjusted rating Universal viewing Parental approval pref. X-rated Universal viewing — — — Parental approval pref.
Appendix Dimensional drawings LC-52LE830E LC-52LE830RU LC-52LE831E LC-52LE831S (169,0) (787.0) (787,0) (738.0) (738,0) (507.0) (507,0) (355.0) (355,0) (536.0) (536,0) (19.0) (19,0) (400.0) (400,0) (52.0) (52,0) (298,0) (215.0) (215,0) (215.0) (215,0) I J K (298.0) (400.0) (400,0) (230.0) (230,0) (400.0) (400,0) (1152.0)*1 (1152,0)*1 (486.0) (486,0) (747.63)*1 (747,63)*1 (839.0) (839,0) (888.0) (888,0) (1329.12)*1 (1329,12)*1 (142,0) (436,0) (1383,0) (33.4) (33,4)*3 (142.
