Manualshelf

Operation Manual, User's Manual

ManualsBrandsSharp ManualsSolarLC60LE831E
111112113114115116117118119120
Table Of Contents
1-115
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
Sharp OSA
Sharp OSA (Open Systems Architecture) is an architecture that directly links the machine to software applications for
work (external applications) over a network.
When you use a machine that supports Sharp OSA, you can link controls on the operation panel and device functions
su
ch as scan send to external applications.
APPLICATION COMMUNICATION
This module enables you to link the machine with a scanner application and other standard applications. Set a standard
application in "Settings (administrator)" and "Sharp OSA".
The Application communication module (MX-AMX2) is required to use these functions on the MX-C303/MX-C303W/
MX-C303WH.
To set a standard application in "Settings (administrator)":
In "Settings (administrator)", select [System Settings] → [Sharp OSA Settings] → [Standard Application Settings].
1
Tap the [Sharp OSA] key in the Home
screen.
If no standard applications have been stored, the key cannot
be tapped.
2
Select a standard application.
If two or more standard applications have been stored, the
screen for selecting a standard application will appear. Tap
the standard application that you wish to use.
If only one standard application has been stored, connection
to the standard application will begin.
3
Connect the machine to the standard application.
The message "Connecting to the external application." appears while the machine communicates with the standard
application.