Operation Manual, User's Manual

1-125
BEFORE USING THE MACHINE►MAINTENANCE
CLEANING THE MAIN CHARGER OF THE
PHOTOCONDUCTIVE DRUM
If black lines or coloured lines appear even after you have cleaned the document glass and automatic document feeder,
use the charger cleaner to clean the main charger that charges the photoconductive drum.
1
Pull out the paper tray 1.
Hold the tray with both hands and slowly pull out and up at a
slight angle.
The waste toner box cannot be removed unless tray 1 is
removed.
2
Open the front cover.
3
Pull out the waste toner box.
Hold the waste toner box with both hands and slowly pull it
out.
When removing the waste toner box, it is easier to draw one side at a time.
4
Place the waste toner box on a flat surface.
Spread newspaper on the surface before placing the waste toner box.
Do not tilt the part with the hole down, as waste toner will spill out.