Operation Manual, User's Manual

2-84
COPIER►OTHER FUNCTIONS
• High Quality Scan from Document Feeder
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [High Quality Scan from
Document Feeder (B/W)] or [High Quality Scan from Document Feeder (Colour)]. The resolution for copying using the
automatic document feeder can be changed from 600 x 400 dpi to 600 x 600 dpi (high quality mode). When high quality
mode is used, fine print and thin lines are reproduced with greater clarity, however, the scanning speed is slower. When
high quality mode is not selected, the following conditions must be satisfied in order to scan at 600 x 600 dpi and attain the
fastest speed.
• The copy ratio must be set to 100%.
• Do not select a special mode that will change the ratio.
• When performing black and white copying, do not copy in black and white with the [Colour Start] key.
• Quick Scan from Document Glass
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Quick Scan from
Document Glass (B/W)] or [Quick Scan from Document Glass (Colour)]. The resolution for copying using the document
glass can be changed from 600 x 600 dpi to 600 x 400 dpi (high speed mode). When high speed mode is selected, the first
copy time is quicker, however, the copy image is not as clear. When high quality mode is not selected, the following
conditions must be satisfied in order to scan at 600 x 400 dpi and attain the fastest speed.
• The copy ratio must be set to 100%.
• Do not select a special mode that will change the ratio.
• When performing black and white copying, do not copy in black and white with the [Colour Start] key.