OPERATION MANUAL
12
E
123
4
5
6
1
7 8910 11 12 13 14
Connecting Peripheral Equipment
Caution
• Besuretoturnoffthemainpowerswitchanddisconnect
the plug from the power outlet before connecting/
disconnecting cables. Also, read the manual of the
equipment to be connected.
• Becarefulnottoconfusetheinputterminalwiththeoutput
terminal when connecting cables. Accidentally reversing
cables connected to the input and output terminals may
cause malfunctions and other problems.
• Donotuseanycablethathasadamagedordeformed
terminal. Using such cables may cause malfunctions.
• Whenyouuseanetwork,yourcommunicationdatais
exposed to the risks of being stolen or illegally accessed.
To avoid these risks, you need to use this monitor in a
secure network environment.
TIPS
• Whenusingthetouchpanel,connecttheUSBcabletothe
computer.
• Imagesmaynotbedisplayedproperlydependingonthe
computer (video card) to be connected.
• Usetheautomaticscreenadjustmentwhenacomputer
screen is displayed for the first time using D-SUB or when
the setting of the computer is changed. The screen is
adjusted automatically using Auto Adjust in PC Setting of
the Picture menu.
• Iftheaudiooutputfromtheplaybackdeviceisconnected
directly to speakers or other devices, the video on the
monitor may appear delayed from the audio portion.
Audio should be played through this monitor by connecting
the playback device to the monitor’s audio input, and
connecting the monitor’s audio output to the speakers or
other devices.
1. USB ports (USB 2.0 compliant) (5 V, 500 mA)
• ConnectaUSBflashdrivetotheUSBport.
• DonotconnectaUSBdeviceotherthanaUSBflash
drive.
• BeforeremovingaUSBflashdrive,followthestepsfor
removal. (See page 13.)
Supported USB flash drives
File System FAT32
Capacity
Up to 32 GB
(maximum file size 4 GB)
• DonotuseaUSBflashdrivewithasecurityfunctionor
a write protection function.
• UseaUSBflashdrivewithashapethatcanbeinserted
in the USB port. Some USB flash drives with special
shapes cannot be inserted. Do not forcibly insert a USB
flash drive. This may damage the connector and cause
failure.
Caution
• PleasedonotchangethevideoinputwhileaUSBflash
drive is inserted in the front facing USB port. This may
damage saved data on the USB flash drive. Please remove
the USB flash drive following the steps on page 13 before
changing the video input. Please insert a USB flash drive in
the rear USB port when you save data.
2. HDMI 1 input terminal
• UseacommerciallyavailableHDMIcable(conformingto
the HDMI standard) that supports 4K.
• ThisterminaldoesnotsupportHDMICEC.
• Ifyouturnthemonitoroffandonwhileusingaconnected
computer, the application window size may change.
Please maximize the application window, or restart the
application.
3. TOUCH PANEL terminal 1 (for touch panel)
• Tousethetouchpanelwithacomputer,connectthe
touch panel to the computer with a USB cable.
• Tousethisterminal,connectyourcomputertotheHDMI
1 input terminal on the front of the monitor.
4. HDMI 3 input terminal
5. HDMI 2 input terminal
• UseacommerciallyavailableHDMIcable(conformingto
the HDMI standard) that supports 4K.