Operation Manual, User's Manual
Table Of Contents
2-41
COPIER►BASIC PROCEDURE FOR MAKING COPIES
1
Tap the [Staple / Punch] key.
► COPY MODE (page 2-3)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientat
ion of the original (page 2-29)
2
Select punching and set the position.
After the settings are completed, tap .
In normal mode
• You can select the offset output checkbox to have each set of output be offset from the previous set to enable
easy removal from the output tray.
• To change the output tray, tap the [Output Tray] key, and select the output destination.