Operation Manual, Software Setup Guide

14
Enable options and peripherals
1
Click the [Start] button, select [Settings]
[Device]
[Devices and Printers].
In Windows 8.1/Windows Server 2012, right-click the [Start]
button, select [Control Panel] [View devices and printers]
(or [Devices and Printers]).
2
Open the printer properties window.
(1) Right-click the printer driver icon of the machine.
(2) Select [Printer properties].
3
Click the [Configuration] tab.
4
Click the [Auto Configuration] button.
The settings are automatically configured based on the
detected machine status.
5
Click the [OK] button in the printer properties
window.
When using the PPD driver, when the "Printer property
screen" is displayed in step 2, follow the steps below:
(1) Click the [Device Settings] tab.
(2) Configure each item based on the machine
configuration.
The items and the procedures for configuring the items
vary depending on the operating system version.
Related topics
Windows / Select the software to be installed (P. 3)
Changing the port (P. 15)
Troubleshooting
The software cannot be installed (P. 22)
How to check the status of the peripherals (P. 22)
Problem with Windows (P. 23)
The options and peripherals of this machine could not be
automatically setup (P. 23)
Table of contents
X
Windows / Select the software to be installed
X
Installing the printer driver / PC-Fax driver (common procedure)
X
Standard installation / Advanced installation / Custom installation
X