Operation Manual, User's Manual

2-5
COPIERBEFORE USING THE MACHINE AS A COPIER
COPYING SEQUENCE
This section explains the basic procedure for copying. Select settings in the order shown below to ensure that the copy
operation takes place smoothly.
For detailed procedures for selecting the settings, see the explanation of each setting in this chapter.
You can also restore the default copy settings before executing copying
In "Settings (administrator)", select [System Settings] [Copy Settings] [Condition Settings] [Auto Clear Before Copy
Execution Also].
Enables the Auto Clear function during copy even when a copy job is not completed. This protects the machine from being
held due to the incomplete copy job.
1
Switch to copy mode.
CHANGING MODES (page 1-11)
2
Place the original.
Place the original in the document feeder tray of the
automatic document feeder, or on the document glass.
AUTOMAT
IC DOCUMENT FEEDER (page 1-107)
DOCUMENT GLASS (page 1-109)
3
Select functions.
Specify the original scan size, exposure, resolution, etc.
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
Spe
cifying the orientation of the original (page 2-29)
If necessary, you can refer to the following functions for the setting.
In Easy mode In Normal mode
Paper Select page 2-12
2-Sided Copy page 2-16
Copy Ratio page 2-22
Staple page 2-37, page 2-37
Original page 2-29
Exposure page 2-19
•N-Up page 2-40
Card Shot page 2-42
•Original page 2-29
Paper Select page 2-12
2-Sided Copy page 2-16
Copy Ratio page 2-22
Exposure page 2-19
Sort/Group page 2-36
•Others page 2-51
Original
A4
Detail
StapleCopy Ratio2-Sided Copy
Paper
Select
A4
Tray 1 1 → 1
100% Off
Preview
Start
Copies
CA
1
Auto
A4
Paper Select
Original
Exposure
Auto
2-Sided Copy
1-Sided→1-Sided
Sort/Group
Staple Sort
Auto
Copy Ratio
100%
Plain
A4
A4
A4
A4
2
1
3
4
A4
Others
Start
Preview
Send as well as print
Call Eco Program
Store Data in Folder
File
Store Data Temporarily
Quick File
1
CA
7
4
1
9
6
3
8
5
2
0
No. of copies