OPERATION MANUAL MODE D'EMPLOI Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION ENGLISH FRANÇAIS ESPAÑOL LC-70LE847U/LC-60LE847U/LC-70LE745U/LC-60LE745U SHARP ELECTRONICS CORPORATION LC-70LE847U LC-60LE847U LC-70LE745U LC-60LE745U LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN MANUAL DE OPERACIÓN Printed in Mexico Imprimé au Mexique Impreso en México TINS-F441WJZZ 12P02-MX-NM IMPORTANT : Please read th
Dimensional Drawings LC-70LE847U/LC-70LE745U 1 35/64 (39)*3 2 13/64 (56)*4 62 49/64 (1594) 6 15/64 (158) 14 7/32 (361) 21 7/64 (536) 15 3/4 (400) 19 21/32 (499) 13 13/64 (335) 15 3/4 (400) 17 49/64 (451) 7 3/4 (200) 10° 9 17/32 (242) 20 27/32 (529) 34 3/32 (865.60)*1 38 (965) 60 19/32 (1538.
ENGLISH LC-70LE847U LC-60LE847U LC-70LE745U LC-60LE745U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear and right side of the TV. Model No.: Serial No.: IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
IMPORTANT INFORMATION CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-70LE847U/LC-60LE847U/LC-70LE745U/LC-60LE745U This device complies with Part 15 of the FCC Rules.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
IMPORTANT SAFETY INSTRUCTIONS Caring for the front panel • Turn off the main power and unplug the AC cord from the wall outlet before handling. • Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel. • Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
IMPORTANT SAFETY INSTRUCTIONS 3D Glasses Prevention of accidental ingestion • Keep the accessory out of the reach of small children. Small children can accidentally swallow these parts. – If a child accidentally swallows any of these parts, seek immediate medical attention. Do not disassemble • Do not disassemble or modify the 3D Glasses except when recycling the batteries. Do not modify the 3D Glasses.
Contents IMPORTANT INFORMATION . . . . . . . . . . . . . . . . . . . 1-2 DEAR SHARP CUSTOMER . . . . . . . . . . . . . . . . . . . . . . . 3 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . 3-6 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 QUICK REFERENCE Attaching the Stand . . . . . . . . . . . . . . . . . . . . .
Accessories Supplied Accessories Make sure the following accessories are provided with the product. Remote control unit (x1) “AAA” size battery (x2) Stand unit (x1) (for LC-70LE847U/LC-70LE745U) Page 10 Page 11 Page 9 Stand unit (x1) (for LC-60LE847U/LC-60LE745U) Cable tie (x1) Operation manual (x1) Page 9 Page 10 Connection guide (x1) • Always use the AC cord supplied with the TV. • The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
QUICK REFERENCE Attaching the Stand • Before attaching (or detaching) the stand, unplug the AC cord. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. CAUTION • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. ■ LC-70LE847U/LC-70LE745U 1 Confirm that there are 12 screws (6 long screws, 4 middle screws and 2 short screws) supplied with the stand unit.
QUICK REFERENCE QUICK INSTALLATION TIPS 1 2 Attach your antenna to the back of the television. (See page 11.) Connect the AC plug for the television into the AC outlet. 2 1 1 AC outlet • Place the TV close to the AC outlet, and keep the power plug within reach. Experiencing HD Images An HDTV without an HD source is just an ordinary TV.
Preparation Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use commercially available cables.
Part Names TV (Front/Side) *1 3D infrared emitter *2 POWER button MENU button INPUT button Channel buttons (CHU/V) OPC sensor *3 Volume buttons (VOLk/l) Center Icon illumination (See page 35.) Remote control sensor *1 See pages 14, 19 and 27 for button operations. *2 This panel emits the infrared signal towards the 3D Glasses you wear when you view 3D images. Do not place anything between the 3D infrared emitter on the TV and the infrared receiver on the 3D Glasses.
Part Names Remote Control Unit 1 2 20 21 6 7 22 8 9 10 11 12 23 24 25 26 13 27 16 17 2 TV, STB, DVD•VCR, AUDIO: Switches the remote control for TV, STB, BD, DVD, VCR and AUDIO operation. (See pages 55 to 56 for details.) * To enter the code registration mode, you need to press an appropriate button (STB, DVD•VCR or AUDIO) and DISPLAY at the same time. 3 External equipment operational buttons: Operate the external equipment. 4 OPTION: Display the Link Operation Menu screen.
Introduction to Connections Types of Connection For connecting the TV to external equipment, use commercially available cables. • The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products. ■ Connecting to video equipment or PC Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your external equipment and use its appropriate terminals for higher quality images.
Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 14 and 23.) For connecting the TV to external equipment, use commercially available cables. CAUTION • To protect equipment, always turn off the TV before connecting any external equipment. • Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting to External Equipment ■ When using Component cable (COMPONENT): • Blu-ray disc player • DVD player • HD cable/satellite set-top box Audio cable AUDIO-R (Red) AUDIO-L (White) COMPONENT OUT PR (Red) Y (Green) PB (Blue) Component video cable • To enjoy 1080p display capability, connect your external equipment using an HDMI-certified cable or a component cable and set the equipment to 1080p output.
Connecting to External Equipment Connecting a Surround System/Audio System ■ When connecting an AV amplifier for surround system HD Cable/Satellite set-top box HDMI-certified cable *1 HDMI OUT OPTICAL DIGITAL AUDIO INPUT HDMI OUT HDMI IN Optical fiber cable *2 • Letting the TV output the audio to an AV amplifier: *1 When you connect ARC-compatible equipment, use the HDMI 1 terminal. *2 If the equipment to be connected is not compatible with the ARC, connect an optical fiber cable.
Connecting to External Equipment Connecting a PC Refer to page 63 for a list of PC signals compatible with the TV. ■ When using HDMI cable (HDMI 1, 2, 3 or 4): HDMI-certified cable HDMI OUT • Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable to the HDMI 2 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 63.) • The HDMI terminals only support digital signal.
Watching TV Turning On/Off the Power Initial Installation When you turn on the TV for the first time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit. POWER 1. Insert the batteries into the remote control unit. (See page 11.) 2. Connect the antenna cable to the TV. (See page 11.) 3. Plug in the AC cord to the AC outlet. (See page 10.
Watching TV 3 Press a/b to select the time zone where you are using the TV, and then press ENTER. Example Antenna & Cable/STB Select the type of connection you will use to watch TV. 6 Press c/d to select "Antenna & Cable" or "Settop box", and then press ENTER. EST CST MST PST Antenna & Cable AKST Set-top box HAST • The time zone differs depending on the selected country. • The factory preset value is the time zone for the capital of the selected country.
Watching TV CH Search (Channel search) Channel auto search makes the TV look for all channels viewable in the set area. 8 When "Air" is selected in Antenna setting: Press c/d to select "Start", and then press ENTER. Network When you connect to the Internet on the TV, select the desired connection method and follow the instructions shown on the display. • Wireless LAN connection is possible only when the WPS (push button) method is used.
Watching TV Completed 11 The settings confirmation screen is displayed. Confirm the information displayed on the screen, and then press ENTER. Examples of the settings confirmation screen When one or more channel is received after "Antenna & Cable" was selected in step 6 and a search was carried out. Language Location & Time TV Location Antenna & Cable/STB Air/Cable Search Result Network Connection • If no channel is found, confirm the type of connection made with your TV and try "EZ Setup" again.
Direct Button Operation Changing Volume You can change the volume by pressing VOLk/l on the TV or on the remote control unit. • To increase the volume, press VOLk. • To decrease the volume, press VOLl. 20 Audio status Output device Speaker Output Select Fixed Variable Variable sound Mute • When “Output Select” is set to “Variable”, the indicator on the screen changes as shown below.
Direct Button Operation FLASHBACK Press FLASHBACK to switch to the previously tuned channel or previous input mode. • Press FLASHBACK again to switch back to the currently tuned channel. Example: When the input source is PC IN or HDMI 1 to 4 ■ LC-70LE847U/LC-60LE847U AUTO STANDARD DYNAMIC (Fixed) • FLASHBACK will not work if no channel has been changed after the TV is turned on. SmartCentral Allows you to directly activate various types of applications.
Direct Button Operation If stereo sound is difficult to hear. • Obtain a clearer sound by manually switching to fixed mono-sound mode. You can change MTS as shown below to match the television broadcast signal. Press AUDIO to toggle between audio modes.
Direct Button Operation VIEW MODE You can select the screen size. 1 Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or a/b while the View Mode menu is displayed to select a desired item on the menu. • You can sequentially select a View Mode that has its own aspect ratio. • You can have the same settings by choosing "View Mode" on the menu items. (See page 33.
On-Screen Display Menu On-Screen Display Menu Operation LCFONT embedded System Options : Select Initial Setup ENTER : Enter RETURN Picture Settings Information : Back MENU : Exit Example Example Menu System Options : Select Picture Settings Initial Setup ENTER : Enter RETURN Picture Settings Information : Back MENU : Exit Menu Picture Settings AV MODE (Changing Pic.Quality) AV MODE (Changing Pic.
On-Screen Display Menu Menu Items • When AV MODE is set to "AUTO", part of the menu may not be displayed correctly or the setting range of the menu may be changed. • Some menu items may not be displayed depending on the selected input source. Picture Settings AV MODE (Changing Pic.Quality) ........Pages 29 and 45 OPC ................................................ Page 29 Backlight ......................................... Page 29 3D Brightness Boost (For LC-70LE847U/LC-60LE847U) ... Page 45 Contrast ...
On-Screen Display Menu Picture Settings AV MODE (Changing Pic.Quality) Adjusts the picture to your preference with the following picture settings. Example Picture Settings ■ When the input source is TV, COMPONENT, VIDEO 1 or 2: Menu AUTO/STANDARD/MOVIE/GAME/USER/DYNAMIC/ DYNAMIC(Fixed) Picture Settings ■ When the input source is PC IN or HDMI 1 to 4: LC-70LE847U/LC-60LE847U AUTO/STANDARD/MOVIE/GAME/PC/USER/x.v.Color/ DYNAMIC/DYNAMIC(Fixed) AV MODE (Changing Pic.
On-Screen Display Menu Color Gamut Range (For LC-70LE847U/LC-60LE847U) You can set the color gamut range. Standard: Standard color gamut. Expanded: More vivid colors with expanded color gamut. • "Color Gamut Range" is only available when AV MODE is set to "MOVIE" or "MOVIE (3D)". Color Temp. (Color Temperature) For a better white balance, use color temperature correction. High: Mid-High: Middle: Mid-Low: Low: Gamma Adjustment Adjusts the differences of picture tones between bright parts and dark parts.
On-Screen Display Menu Audio Settings Auto Volume You can adjust the sound quality to your preference with the following settings. Example High: Reducing the loudness gaps among different sound sources strongly. Menu Audio Settings Audio Settings Middle: Auto Volume Low: Reducing the loudness gaps among different sound sources slightly. [Off] Treble [ 0] a15 b15 Bass [ 0] a15 • Audio Settings menu is grayed out when "Output Select" is set to "Variable". (See page 34.
On-Screen Display Menu Power Control Power control setting allows you to save energy. Example Menu Power Control Power Control Audio Only Power Saving [ Standard] No Signal Off [Enable] No Operation Off [Disable] 1 Press MENU to display the MENU screen, and then 2 press c/d to select "Power Control". Press a/b to select a specific adjustment item, and then press ENTER. 3 Press a/b (or c/d) to select the desired setting, and then press ENTER. 4 Press MENU to exit. • Skip this step for "Audio Only".
On-Screen Display Menu System Options Example System Options Menu System Options View Mode This function changes the screen size. Select "View Option" on the menu to display the View Mode menu screen. The View Mode menu varies depending on the input source. • You can select View Mode by pressing VIEW MODE on the remote control unit. — See page 26 for adjusting the video being input from a TV, other audiovisual equipment, USB-Video, DLNAVideo or Internet applications.
On-Screen Display Menu Input Skip This setting allows you to skip the TV, HDMI or PC IN Input ("TV", "PC IN", "HDMI 1", "HDMI 2", "HDMI 3" and "HDMI 4") on the Input Selection operation. Yes: Skips the input. No: Does not skip input. Menu Design Channel Selecting Effect You can select whether to use transition effects when changing channels. Yes: A transition effect is used when the channel is changed. No: No function.
On-Screen Display Menu Game Play Time This function displays the elapsed game time so you do not lose track of the time. To display the elapsed time, select "GAME" for the AV MODE before starting the game. On: The elapsed time is displayed every 30 minutes when you switch to GAME mode in external input mode. Off: No adjustment. Operation Lock Out This function locks the operation buttons on the TV and the remote control. Off: No adjustment. RC Control Lock: All buttons on the remote control are locked.
On-Screen Display Menu Initial Setup Example Initial Setup Menu Antenna & Cable/STB: Select the type of connection you will use to watch TV. Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable". CH Search: Channel auto search makes the TV look for all channels viewable in the set area. • If "Cable" is selected for Antenna setting, scrambled channels are removed after the Channel search has been completed.
On-Screen Display Menu Favorite CH (Favorite Channel Setting) This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. To register your favorite channel: Select "Register" and then press ENTER. Press a/b/c/ d to select the position in the category, and then press ENTER to register. To delete your favorite channel: Select "1 Data Clear" and then press ENTER.
On-Screen Display Menu V-Chip V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your TV. "V-Chip" and "Status" will not be selectable from the menu if you do not first configure your secret number. • The U.S.
On-Screen Display Menu Canadian Rating Systems (Canadian English ratings and Canadian French ratings) • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
On-Screen Display Menu Information 2 Press a/b to select “Software Update”, and then press ENTER. Example Information Menu • If you have already set the Secret No., go to step 3. Example Menu Information Information Information Identification Identification Digital Caption Info. Digital Caption Info. Software Update Software Update Netflix Help VUDU Help 1 Press MENU to display the MENU screen, and then 2 3 4 press c/d to select "Information".
On-Screen Display Menu ■ Updating the Software via the Network 1 Press a/b on the Manual Update screen to select "Network Update", and then press ENTER. • The TV connects to the network and checks for updates. • To cancel, press ENTER. Connecting to Internet.. Checking for the latest software version.. Accessing.. Abort CAUTION • Do not unplug the AC cord while the software is being updated.
On-Screen Display Menu 3 Press ENTER to start checking the data in the USB memory device. 5 To update the TV software with the update file, select “Yes”, and then press ENTER. Software update file is detected in the USB memory device. Start update? Insert the USB memory device containing the software update file. Current Version Update Version : UXXXXXX1 : UXXXXXX2 OK Yes No 4 During the data checking, “Checking” blinks. Example Now checking the data in the USB memory device.
Enjoying 3D Image Viewing You can use special 3D Glasses to watch 3D-supported images on this TV. • You can enjoy 3D movies on this TV by viewing the movie through SHARP 3D Glasses sold separately. • To produce 3D images, liquid crystal shutters in the 3D Glasses alternately open and close imperceptibly fast to exactly match alternating left and right video images displayed by the TV. • Not all consumers can experience and enjoy 3DTV.
Enjoying 3D Image Viewing Viewing 3D Images Switching from 3D to 2D Mode 4 Press 3D during the 3D mode. Select “Yes” and press ENTER to switch to 2D mode. Yes No • Take off the 3D Glasses and turn off the power. • The TV screen may temporarily become black when the TV is trying to detect a 3D image signal and when switching from 3D to 2D mode. Receiving a 3D Image Signal That Can Be Detected Automatically The image signal may contain a 3D identification signal.
Enjoying 3D Image Viewing Switching from 3D to 2D Mode 6 Press c/d to select the 2D signal type ( “Side by Side” or “Top and Bottom”) and then press ENTER. Configuring the TV Settings to Enhance 3D Image Viewing Example Side by Side Top and Bottom Select when two images are displayed next to each other. • If you select the same system as that of the input signal, 2D images are displayed. • Take off the 3D Glasses and turn off the power. Picture Settings Menu Picture Settings AV MODE (Changing Pic.
Enjoying 3D Image Viewing 3D Setup You can make various settings to enhance 3D image viewing. Example System Options Menu System Options View Option 3D Setup AQUOS LINK Setup Terminal Setting 1 Press MENU to display the MENU screen, and then press c/d to select “System Options”. 2 Press a/b to select “3D Setup”, and then press 3 4 5 ENTER. Press a/b to select a specific item, and then press ENTER. Press a/b (or c/d) to select the desired setting, and then press ENTER. Press MENU to exit.
Enjoying 3D Image Viewing • Appropriate 3D Glasses (sold separately) are required to view 3D images. Purchase 3D Glasses for use with Sharp brand 3D LCD TVs. ■ 3D Glasses lenses • Do not apply pressure to the lenses of the 3D Glasses. Also, do not drop or bend the 3D Glasses. • Do not scratch the surface of the lenses of the 3D Glasses with a pointed instrument or other object. Doing so may damage the 3D Glasses and reduce the quality of the 3D image.
Enjoying Photo/Music/Video Playback You can connect the TV to a USB memory device, USB hard drive or home network (DLNA) server to enjoy viewing pictures, listening to music, and watching videos. • Depending on the USB memory device/USB hard drive/home network (DLNA) server, the TV may not be able to recognize the recorded data. • It may take time to read the recorded data if the USB memory device/USB hard drive/home network (DLNA) server contains many files or folders.
Enjoying Photo/Music/Video Playback USB Device Compatibility Selecting the Folders to Play Back USB device File system Photo file format Music file format • To play back data on a USB memory device, insert the USB memory device on the TV. USB mode is selected automatically. (Go to step 2) • Use the following procedure to switch back to USB mode after switching from USB mode to another mode. 1 Select "USB" or "Home Network (DLNA)" from INPUT list screen. 2 Press D.
Enjoying Photo/Music/Video Playback Playing Back Files on a USB Memory Device/Home Network (DLNA) Server Photo Mode Viewing Thumbnails Example ... picture 1 picture 2 picture 3 picture 4 picture 5 ... • When there are invalid photo files, the X mark will be displayed for the file. (USB mode only.) • The icon appears on the thumbnails of 3D images. If you do not switch to 3D mode for the 3D images, they will be displayed in 2D. (USB mode only.
Enjoying Photo/Music/Video Playback USB Menu On the menu to be displayed in USB mode, use a/b to select an item and make settings to your preferences. Example Music Mode Example ... USB MENU 3D Display [On] Select Slide Show Interval [10sec] SONG_03.MP3 music 1 music 2 music 3 SONG_01.MP3 SONG_02.MP3 SONG_03.MP3 SONG_04.MP3 SONG_05.MP3 SONG_06.MP3 SONG_07.MP3 music 4 music 5 I I I I I I I ...
Enjoying Photo/Music/Video Playback USB Menu On the menu to be displayed in USB mode, use a/b to select an item and make settings to your preferences. Buttons for playing mode Buttons a Example USB MENU Set All Auto Play Reset All Auto Play * Remove USB Device * See page 51 for details on the Remove USB Device function. ■ Set/Reset All Auto Play Selecting "Set All Auto Play" or "Reset All Auto Play" will display the music list screen.
Enjoying Photo/Music/Video Playback ■ Using the operation panel You can use the operation panel for video playback operations. You can call up this operation panel by pressing MENU after you press a/b to select "USB Operation Panel"/"Home Network (DLNA) Operation Panel" from "System Options" > "View Option". Example Buttons for using the Home Network (DLNA) operation panel d ) / + Audio Title Starts playback. Go to the beginning of a file by pressing once or to the previous file by pressing twice.
Enjoying Photo/Music/Video Playback Example Initial Setup Menu Playing Back Files from a Portable Device or PC With the remote playback function, you can use your portable device to play back pictures, video, and music on the home network server. Initial Setup EZ Setup Broadcasting Setup Internet Setup Language [English] DivX® Setup Individual Setup DivX® Setup This is the function to confirm your registration code. You need to register the code at http://www.divx.com.
Other Viewing Options Presetting Remote Control Function Operating the Connected Equipment You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, BD, DVD, LD) using the presetting manufacturer function of your remote control unit. To operate the connected equipment, press STB, DVD•VCR or AUDIO to select your device. (STB (cable/satellite set-top box), BD, DVD, VCR or AUDIO.) The remote control unit button will function as follows.
Other Viewing Options Manufacturer codes VCR BRAND AUDIO DYNAMICS BROCKSONIC CANON CRAIG CURTIS MATHIS DBX EMERSON GE INSTANT REOLYA JC PENNEY JVC KENWOOD MAGNAVOX MAGNIN MEMOREX MONTGOMERY WARD NEC PANASONIC PENTAX PHILCO PHILIPS QUASAR REALISTIC SAMSUNG SHARP SONY SYLVANIA TATUNG TEAC TMK YAMAHA BD/DVD/LD BRAND DENON JVC KENWOOD MAGNAVOX MARANTZ MITSUBISHI PANASONIC PHILIPS PIONEER PROSCAN RCA SAMSUNG SHARP SONY TOSHIBA YAMAHA ZENITH REMOTE CONTROL CODE NUMBER 09 13 04 12 04 09 10, 13, 14 04 04 04 09
Using AQUOS LINK Controlling HDMI Equipment Using AQUOS LINK What’s AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD). • By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV. • AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.
Using AQUOS LINK AQUOS LINK Setup Example System Options Menu System Options AQUOS LINK Setup AQUOS LINK Control [On] Auto Power On [Yes] Selecting Recorder Channel Select Key Audio Return Channel [Auto] 1 Press MENU to display the MENU screen, and then press c/d to select "System Options". 2 Press a/b to select “AQUOS LINK Setup”, and then press ENTER. 3 Press a/b to select a specific item, and then press Channel Select Key This function can be set for each input terminal.
Using AQUOS LINK Link Operation Menu Menu Link Operation Link Operation One Touch Recording This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINKcompatible equipment with a recording function by simply pressing (REC on the remote control. Prepare the connected AQUOS LINK-compatible recorder for recording. Check the following items. • Make sure that the antenna cable is connected.
Using AQUOS LINK Recorder Power On/Off You can manually turn on/off the power of the connected AQUOS LINK-compatible equipment. Each time you press ENTER, the connected equipment switches on or off. Device Operation Panel You can use the device operation panel to control playback operations. Press a/b/c/d to select the desired operation. • This function works only when AQUOS LINK-compatible equipment with the Device Operation Panel function is connected. Play from Rec.
Using AQUOS LINK Using a Smartphone with the TV This function enables you to connect the TV to a smartphone that supports Mobile High-Definition Link (MHL) using an MHL-compatible cable. To connect the TV to your MHL-compatible smartphone, be sure to use an MHL-compatible cable (commercially available). • You can view pictures and video on a large screen. • You can play back music files. MHL-compatible cable Back panel vertical inputs • An MHL-compatible portable device is required to use this function.
Using a PC Displaying a PC Image on the Screen VIEW MODE You can select the screen size. 1 Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or a/b while the View Mode menu is displayed to select a desired item on the menu. • You can sequentially select a View Mode that has its own aspect ratio. • • • • Connect the PC before making adjustments. (See page 18.
Using a PC Example Menu System Options Audio Select System Options View Option 3D Setup AQUOS LINK Setup Terminal Setting Menu Design O ti L kO t 1 Press MENU to display the MENU screen, and then press c/d to select "System Options". 2 Press a/b to select "Terminal Setting", and then 3 4 5 Setting Audio Input press ENTER. Press a/b to select "PC input" or "Audio Select", and then press ENTER. Press a/b to select a specific adjustment item, and then press ENTER to set each item.
Using a PC Control of the TV • The TV can be controlled from a PC, control panels and other devices using the RS-232C or IP. • Use a cross-type RS-232C cable, ETHERNET cable (commercially available) or wireless LAN for the connections. • This operation system should be used by a person who is accustomed to using computers.
Using a PC ■ Command table • Commands not indicated here are not guaranteed to operate.
Using the Internet By connecting your TV to a broadband system, you can access the Internet from the TV. • Use "AQUOS ADVANTAGE LIVE" to obtain the latest software and receive online user support. (See page 68.) • You can enjoy a variety of streaming content and Internet applications. (See page 72.) • You may not be able to view 3D images when accessing the Internet. Connecting to the Internet • To connect your TV to the Internet, you must have a broadband Internet connection.
Using the Internet Internet Setup Example Initial Setup Menu 5 Press a/b to select "Push button", and then press ENTER. • To configure the setting via PC, select "PIN code". Follow the on-screen instructions and the operation manual of the access point to configure the settings. 6 Select "Next" to complete the settings. • The connection process starts and the WPS button on the access point can be pressed. Initial Setup 7 Press the WPS button on the access point.
Using the Internet Checking Your Internet Connection 1 Press SmartCentral to display the application 2 window. Press c/d to select "AQUOS ADVANTAGE LIVE", and then press ENTER. AQUOS Advantage Live This function can be used to display up-to-date information and allow you to receive support service over the network. • If " " or " " is displayed after you connect to the Internet, check your TV's network settings and connection.
Using the Internet Entering Text (Software Keyboard) When you are editing an input screen or specifying the Ethernet settings used for accessing the Internet, enter text from the software keyboard. • You can enter up to 128 characters for text. • Some special characters or diacritics may not be available depending on where you enter the text. The text you enter is displayed as you type it in. To move the cursor (the current input position), use ” or “ ” on the software keyboard.
Using the Internet Using the Browser ENTER, a/b/c/d • Press a/b/c/d to select a link that you want to jump, and then press ENTER. EXIT • Press the button to return to the TV screen. RETURN • Press the button to return to the previous page. D DISCLAIMERS SHARP corporation bears no responsibility regarding the content and quality of the content provided by the content serve provider. CAUTION • Display the toolbar.
Using the Internet Using the Toolbar Browser Settings You can use the toolbar to control the browser and to specify settings. 1 Press D to display the toolbar. 2 Press c/d to select a function, and then press ENTER. Saving the URL of the Current Page You can check or modify your browser settings from the Browser menu. 1 Press D to display the toolbar. 2 Press c/d to select “ ” in the toolbar, and then press ENTER. 3 Press a/b to select and confirm the item you want to set.
Using the Internet Using Applications via the Internet By connecting the TV to the Internet, you can enjoy a variety of broadband content, including videos, music and photos. Please check that the most current software is loaded on TV by selecting "Auto Update Setting" on "Software Update" (see page 40) or by visiting http://www.sharpusa.com/products/support/ to check for a download of the newest software version.
Using the Internet Example Information Menu Information Identification Digital Caption Info. Software Update Netflix Help VUDU Help Deactivating Netflix Function 1 Press MENU to display the menu screen. 2 Press c/d to select "Information", and then press ENTER. 3 Press a/b to select "Netflix Help", and then press ENTER. 4 Press c/d to select "Deactivate", and then press ENTER. • To confirm the Netflix status, check the information displayed on the screen and click "OK".
Using the Internet When you access the Internet application for the first time, the following appears. • This message is available only in English. DISCLAIMERS • This SHARP device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties.
Appendix Removing the Stand • Before detaching (or attaching) the stand, make sure to turn off the TV and unplug the AC cord. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. ■ LC-70LE847U/LC-70LE745U 1 Loosen the screws used to secure the stand cover. ■ LC-60LE847U/LC-60LE745U 1 1 Loosen the screws used to secure the stand cover. 2 Remove the cover. 2 2 1 Pull the bottom of the stand cover slightly toward you to allow it to move upward.
Appendix Setting the TV on the Wall CAUTION • This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. • Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
Appendix Troubleshooting Problem Possible Solution • No power • Check if you pressed POWER on the remote control unit. • Is the AC cord disconnected? Page 10 • Has the power been turned on? Page 19 • Unit cannot be operated. • External influences such as lightning, static electricity, may cause improper operation. In this case, operate the unit after first turning off the power of the TV or unplugging the AC cord and replugging it in after 1 or 2 minutes. • Remote control unit does not operate.
Appendix Problem Possible Solution • No picture • • • • Is connection to other components correct? Pages 14 to 18 and 57 Is the correct input selected? Pages 14 and 23 Is "On" selected in "Audio Only"? Page 32 If the PC image is not displayed, check the following: - When connecting a laptop PC to the TV, check that display output mode of the PC is set to external monitor. - Check the resolution setting on the PC. Is a non-compatible signal being input? Page 63 • Picture quality of HD programs is poor.
Trademarks • SmartCentral is a registered trademark of Sharp Corporation • Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy efficiency. • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • "HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Specifications TV Item LCD panel TV Function Size Resolution TV-standard (CCIR) VHF/UHF CATV Receiving Digital Terrestrial Channel Broadcast (8VSB) Digital cable*1 (64/256 QAM) Audio multiplex Audio out Back panel vertical inputs Terminals Back panel surface inputs Back panel horizontal inputs HDMI 1 HDMI 2 HDMI 3 HDMI 4 AUDIO OUT USB 1*2 COMPONENT VIDEO 1 VIDEO 2 PC IN RS-232C ANT/CABLE AUDIO IN DIGITAL AUDIO OUTPUT ETHERNET USB 2*2 OSD language Power Requirement Power Consumption Weight *3 Dimens
Specifications Wireless LAN This TV has received the following certifications. - Wi-Fi CERTIFIED™ (certification program from the Wi-Fi Alliance® ) - Wi-Fi Protected Setup™ (certification program from the Wi-Fi Alliance® ) FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Information on the Software License for This Product ■ Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
Information on the Software License for This Product libzzip c-ares Group 42 zlib Copyright © Guido Draheim guidod@gmx.de Copyright © 1998 by the Massachusetts Institute of Technology. Portions copyright © 2000 Group 42, Inc. and the Contributing Authors. Portions copyright © 1995-1996 Jean-loup Gailly and Mark Adler. RSA Data Security MD5.CPP - RSA Data Security, Inc., MD5 message-digest algorithm. Copyright © 1991-2, RSA Data Security, Inc. Created 1991. All rights reserved.
Information on the Software License for This Product OpenSSL LICENSE ISSUES The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org. OpenSSL License Copyright © 1998-2008 The OpenSSL Project. All rights reserved.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
86 LC-70̲60LE745U̲847U̲E̲08.
Dimensional Drawings LC-70LE847U/LC-70LE745U 1 35/64 (39)*3 2 13/64 (56)*4 62 49/64 (1594) 6 15/64 (158) 14 7/32 (361) 21 7/64 (536) 15 3/4 (400) 19 21/32 (499) 13 13/64 (335) 15 3/4 (400) 17 49/64 (451) 7 3/4 (200) 10° 9 17/32 (242) 20 27/32 (529) 34 3/32 (865.60)*1 38 (965) 60 19/32 (1538.
OPERATION MANUAL MODE D'EMPLOI Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION ENGLISH FRANÇAIS ESPAÑOL LC-70LE847U/LC-60LE847U/LC-70LE745U/LC-60LE745U SHARP ELECTRONICS CORPORATION LC-70LE847U LC-60LE847U LC-70LE745U LC-60LE745U LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN MANUAL DE OPERACIÓN Printed in Mexico Imprimé au Mexique Impreso en México TINS-F441WJZZ 12P02-MX-NM IMPORTANT : Please read th
