FRANÇAIS ENGLISH LC-70LE735U LC-70LE735U OPERATION MANUAL SHARP ELECTRONICS CORPORATION ESPAÑOL LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN MODE D'EMPLOI Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION MANUAL DE OPERACIÓN Printed in Mexico Imprimé au Mexique Impreso en México TINS-F207WJZZ 11P07-MX-NM IMPORTANT : Please read this operation manual before starting operating the equipment.
Dimensional Drawings Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) 2 1/64 (51)*2 63 1/ 2 3 1/2 (89) (1613) 5 23/64 (136) 13 1/8 (333) 21 7/64 (536) 15 3/4 (400) 8 15/32 (215) 38 9/32 (972) 15 3/4 (400) 4 1/2 (114) 7 31/64 (190) 5° 10 9/32 (261) 21 3/16 (538) 34 3/32 (865.62)*1 38 25/64 (975) 39 45/64 (1008) 60 19/32 (1538.88)*1 5 25/64 (137) 7 59/64 (201) AN-52AG4 *1 *2 LC-70LE735U_E_Cover.
ENGLISH LC-70LE735U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No.: Serial No.: IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
IMPORTANT INFORMATION CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-70LE735U This device complies with Part 15 of the FCC Rules.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
IMPORTANT SAFETY INSTRUCTIONS Caring for the front panel • Turn off the main power and unplug the AC cord from the wall outlet before handling. • Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel. • Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
IMPORTANT SAFETY INSTRUCTIONS 3D Glasses Prevention of accidental ingestion • Keep the accessory out of the reach of small children. Small children can accidentally swallow these parts. – If a child accidentally swallows any of these parts, seek immediate medical attention. Do not disassemble • Do not disassemble or modify the 3D Glasses except when recycling the batteries. Do not modify the 3D glasses. Handling the 3D Glasses • Do not drop, exert pressure on, or step on the 3D Glasses.
Contents IMPORTANT INFORMATION . . . . . . . . . . . . . . . . . . . . . 1 DEAR SHARP CUSTOMER . . . . . . . . . . . . . . . . . . . . . . . 3 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . 3-6 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 QUICK REFERENCE Attaching the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . QUICK INSTALLATION TIPS . . . . . . . . . . . . . . . . . . . Experiencing HD Images . . . . . . . . . . . . . . . . . . . . . . .
Supplied Accessories Make sure the following accessories are provided with the product. Remote control unit (g1) Page 9 “AAA” size battery (g2) Page 10 Stand unit (g1) Page 8 Operation manual (g1) Connection guide (g1) • Always use the AC cord supplied with the TV. • The illustrations above are for explanation purposes and may vary slightly from the actual accessories. QUICK REFERENCE Attaching the Stand • Before attaching (or detaching) the stand, unplug the AC cord.
QUICK REFERENCE QUICK INSTALLATION TIPS 1 2 Attach your antenna to the back of the television. (See page 10.) Connect the AC plug for the television into the AC outlet. 2 1 Experiencing HD Images An HDTV without an HD source is just an ordinary TV.
Preparation Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use commercially available cables.
Part Names TV (Front) OPC sensor *1 Remote control sensor Center Icon illumination (See page 33.) 3D infrared emitter *2 *1 OPC: Optical Picture Control (See page 27.) *2 This panel emits the infrared signal towards the 3D Glasses you wear when you view 3D images. Do not place anything between the 3D infrared emitter on the TV and the infrared receiver on the 3D Glasses.
Part Names Remote Control Unit 1 1 POWER: Switch the TV power on or enter standby. (See page 18.) 2 TV, STB, DVD•VCR, AUDIO: Switches the remote control for TV, STB, DVD, BD, VCR and AUDIO operation. (See pages 55 to 56 for details.) 18 * To enter the code registration mode, you need to press an appropriate button (STB, DVD•VCR or AUDIO) and DISPLAY at the same time. 19 2 3 External equipment operational buttons: Operate the external equipment.
Introduction to Connections Types of Connection For connecting the TV to external equipment, use commercially available cables. • The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products. ■ Connecting to video equipment or PC Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your external equipment and use its appropriate terminals for higher quality images.
Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 13 and 22.) For connecting the TV to external equipment, use commercially available cables. CAUTION • To protect equipment, always turn off the TV before connecting any external equipment. • Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting to External Equipment ■ When using Component cable (COMPONENT): • Blu-ray disc player • DVD player • HD cable/satellite set-top box Audio cable AUDIO-R (Red) AUDIO-L (White) COMPONENT OUT PR (Red) Y (Green) PB (Blue) Component video cable • To enjoy 1080p display capability, connect your external equipment using an HDMI-certified cable or a component cable and set the equipment to 1080p output.
Connecting to External Equipment Connecting a Surround System/Audio System ■ When connecting an AV amplifier for surround system HD Cable/Satellite set-top box HDMI-certified cable *1 HDMI OUT OPTICAL DIGITAL AUDIO INPUT HDMI OUT HDMI IN Optical fiber cable *2 • Letting the TV output the audio to an AV amplifier: *1 When you connect ARC-compatible equipment, use the HDMI 1 terminal. *2 If the equipment to be connected is not compatible with the ARC, connect an optical fiber cable.
Connecting to External Equipment Connecting a PC Refer to page 62 for a list of PC signals compatible with the TV. ■ When using HDMI cable (HDMI 1, 2, 3 or 4): HDMI-certified cable HDMI OUT • Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 62.) • The HDMI terminals only support digital signal.
Watching TV Initial Installation Turning On/Off the Power POWER When you turn on the TV for the first time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit. 1. Insert the batteries into the remote control unit. (See page 10.) 2. Connect the antenna cable to the TV. (See page 10.) 3. Plug in the AC cord to the AC outlet. (See page 9.
Watching TV Antenna & Cable/STB Select the type of connection you will use to watch TV. CH Search (Channel search) 3 Press c/d to select "Antenna & Cable" or "Set- 5 When "Air" is selected in Antenna setting: top box", and then press ENTER. Antenna & Cable Channel auto search makes the TV look for all channels viewable in the set area. Press c/d to select "Start", and then press ENTER.
Watching TV Completed 6 The settings confirmation screen is displayed. Confirm the information displayed on the screen, and then press ENTER. Examples of the settings confirmation screen When one or more channel is received after "Antenna & Cable" was selected in step 3 and a search was carried out.
Direct Button Operation MUTE Mutes the current sound output. Press MUTE. • " " will be displayed on the screen for 30 minutes, and the sound is silenced. • Within 30 minutes of pressing MUTE, mute can be canceled by pressing VOLk/l or MUTE. • Mute will be canceled after 30 minutes have passed. However, the TV will not suddenly output a loud sound as the volume level is set to 0 automatically. Sleep Timer Changing Channels You can change channels in several ways.
Direct Button Operation AV MODE INPUT AV MODE gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. Press AV MODE. Current AV MODE displays. • Press AV MODE again before the mode displayed on the screen disappears.
Direct Button Operation Closed Captions and Digital Closed Captions Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider. 1 Press CC. Digital Closed Caption service is a new caption service available only on digital TV programs (also at the discretion of the service provider).
Direct Button Operation VIEW MODE You can select the screen size. 1 Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or a/b while the View Mode menu is displayed to select a desired item on the menu. • You can sequentially select a View Mode that has its own aspect ratio. • You can have the same settings by choosing "View Mode" on the menu items. (See page 31.
On-Screen Display Menu On-Screen Display Menu Operation LCFONT embedded System Options : Select Initial Setup ENTER : Enter RETURN Picture Settings Information : Back MENU : Exit Example Example Menu System Options : Select Picture Settings Initial Setup ENTER : Enter RETURN Picture Settings Information : Back MENU : Exit Menu Picture Settings AV MODE (Changing Pic.Quality) AV MODE (Changing Pic.
On-Screen Display Menu Menu Items • When AV MODE is set to "AUTO", part of the menu may not be displayed correctly or the setting range of the menu may be changed. • Some menu items may not be displayed depending on the selected input source. Picture Settings AV MODE (Changing Pic.Quality) ........Pages 27 and 43 OPC ................................................ Page 27 Backlight ......................................... Page 27 3D Brightness Boost ....................... Page 43 Contrast .............
On-Screen Display Menu AV MODE (Changing Pic.Quality) Picture Settings Adjusts the picture to your preference with the following picture settings. Example Picture Settings The audio and video settings can be changed to suit the program or input content being watched. Select from the following AV modes.
On-Screen Display Menu Color Gamut Range You can set the color gamut range. Standard: Standard color gamut. Expanded: More vivid colors with expanded color gamut. • "Color Gamut Range" is only available when AV MODE is set to "MOVIE" or "MOVIE (3D)". Color Temp. (Color Temperature) For a better white balance, use color temperature correction.
On-Screen Display Menu Auto Volume Audio Settings You can adjust the sound quality to your preference with the following settings. Example Audio Settings Menu Different sound sources sometimes do not have the same loudness level, such as a program and its commercial breaks. The Automatic Volume Control (Auto Volume) reduces this problem by equalizing levels. High: Reducing the loudness gaps among different sound sources strongly.
On-Screen Display Menu Power Saving Power Control Power control setting allows you to save energy. Example Menu Power Control Power Control Audio Only This function allows you to set the Power Saving level in order to decrease the power consumption and increase the backlight lifespan. Standard: Optimizes power reduction based upon video content. When set to "Standard", " " appears on the screen. Advanced: Optimizes power reduction based upon video content and engages OPC.
On-Screen Display Menu Freeze Allows you to capture and freeze a moving image that you are watching. System Options Example System Options Menu • You can select Freeze by pressing FREEZE on the remote control unit. See page 21 for details of Freeze function. System Options Change Audio Allows you to change the audio when multiple audio is available for the program you are watching.
On-Screen Display Menu Change CC Allows you to change the Closed Caption display. Select "Change CC" on the menu to display the Closed Caption information. • The information displayed varies depending on the program you are watching. • You can change Closed Caption by pressing CC on the remote control unit. See page 23 for details of Closed Caption function.
On-Screen Display Menu Caption Setup This function allows you to adjust the closed caption screen appearance to suit your preference. You can adjust 7 items: "Caption Size", "Font Style", "Foreground Color", "Foreground Opacity", "Background Color", "Background Opacity" and "Character Edge". Example: Selectable items available for "Font Style". Default: The font specified by broadcasting station or default font. Type 0: Proportional font used in the MENU screen. Type 1: Monospaced with serifs.
On-Screen Display Menu Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable". CH Search: Channel auto search makes the TV look for all channels viewable in the set area. Initial Setup Example Initial Setup Menu Initial Setup • If "Cable" is selected for Antenna setting, scrambled channels are removed after the Channel search has been completed. Completed: The settings confirmation screen is displayed. Confirm the information displayed on the screen.
On-Screen Display Menu Favorite CH (Favorite Channel Setting) This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. To register your favorite channel: Select "Register" and then press ENTER. Press a/b/c/ d to select the position in the category, and then press ENTER to register. To delete your favorite channel: Select "1 Data Clear" and then press ENTER.
On-Screen Display Menu V-Chip V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your TV. "V-Chip" and "Status" will not be selectable from the menu if you do not first configure your secret number. • The U.S.
On-Screen Display Menu Canadian Rating Systems (Canadian English ratings and Canadian French ratings) • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
On-Screen Display Menu 2 Press a/b to select “Software Update”, and then Information press ENTER. Example Information Menu • If you have already set the Secret No., go to step 3. Example Menu Information Information Information Identification Identification Digital Caption Info. Digital Caption Info. Software Update Software Update Netflix Help VUDU Help 1 Press MENU to display the MENU screen, and then 2 3 4 press c/d to select "Information".
On-Screen Display Menu ■ Updating the Software via the Network 1 Press a/b on the Manual Update screen to select "Network Update", and then press ENTER. • The TV connects to the network and checks for updates. • To cancel, press ENTER. Connecting to Internet.. Checking for the latest software version.. Accessing.. Abort CAUTION • Do not unplug the AC cord while the software is being updated.
On-Screen Display Menu 3 Press ENTER to start checking the data in the USB memory device. 5 To update the TV software with the update file, select “Yes”, and then press ENTER. Software update file is detected in the USB memory device. Start update? Insert the USB memory device containing the software update file. Current Version Update Version : UXXXXXX1 : UXXXXXX2 OK Yes No 4 During the data checking, “Checking” blinks. Now checking the data in the USB memory device.
Enjoying 3D Image Viewing You can use special 3D Glasses to watch 3D-supported images on this TV. • You can enjoy 3D movies on this TV by viewing the movie through SHARP 3D Glasses sold separately. • To produce 3D images, liquid crystal shutters in the 3D Glasses alternately open and close imperceptibly fast to exactly match alternating left and right video images displayed by the TV. • Not all consumers can experience and enjoy 3DTV.
Enjoying 3D Image Viewing Switching from 3D to 2D Mode Viewing 3D Images 4 Press 3D during the 3D mode. Select “Yes” and press ENTER to switch to 2D mode. Yes No • Take off the 3D Glasses and turn off the power. Ending 3D Image Viewing • The TV screen may temporarily become black when the TV is trying to detect a 3D image signal and when switching from 3D to 2D mode. Receiving a 3D Image Signal That Can Be Detected Automatically The image signal may contain a 3D identification signal.
Enjoying 3D Image Viewing Switching from 3D to 2D Mode 6 Press c/d to select the 2D signal type ( “Side by Side” or “Top and Bottom”) and then press ENTER. Configuring the TV Settings to Enhance 3D Image Viewing Example Side by Side Top and Bottom Select when two images are displayed next to each other. • If you select the same system as that of the input signal, 2D images are displayed. • Take off the 3D Glasses and turn off the power. Picture Settings Menu Picture Settings AV MODE (Changing Pic.
Enjoying 3D Image Viewing 3D Setup You can make various settings to enhance 3D image viewing. Example System Options Menu 3D Still Image Effect Setting Select the method for adjusting the 3D still image effect (depth). Auto: Adjusts the still image effect (depth) automatically. Manual: Manually adjust the still image effect (depth). System Options View Option 3D Setup AQUOS LINK Setup Input Terminal Setting 1 Press MENU to display the MENU screen, and then press c/d to select “System Options”.
Enjoying 3D Image Viewing • Appropriate 3D Glasses (sold separately) are required to view 3D images. Purchase 3D Glasses for use with Sharp brand 3D LCD TVs. ■ 3D Glasses lenses • Do not apply pressure to the lenses of the 3D Glasses. Also, do not drop or bend the 3D Glasses. • Do not scratch the surface of the lenses of the 3D Glasses with a pointed instrument or other object. Doing so may damage the 3D Glasses and reduce the quality of the 3D image.
Enjoying Photo/Music/Video Playback You can connect the TV to a USB memory device, USB hard drive or home network (DLNA) server to enjoy viewing pictures, listening to music, and watching videos. • Depending on the USB memory device/USB hard drive/home network (DLNA) server, the TV may not be able to recognize the recorded data. • It may take time to read the recorded data if the USB memory device/USB hard drive/home network (DLNA) server contains many files or folders.
Enjoying Photo/Music/Video Playback Select the Files to Play Back • You cannot switch the input mode if a USB memory device is not connected. • You do not need to select the drive/server in step 2 when there is only one drive in the connected USB memory device or there is only one home network (DLNA) server connected to the TV. • 16 is the maximum number of USB drives and 10 is the maximum number of home network (DLNA) servers that can be displayed. • "VIEW MODE" is fixed during the Photo or Music mode.
Enjoying Photo/Music/Video Playback Viewing Individual Photos The photo selected on the thumbnail selection screen is displayed. Buttons for individual display operation Playing Back Files on a USB Memory Device Photo Mode Buttons c/d Viewing Thumbnails Description Go to the previous/next photo in the same directory. Return to the thumbnail selection screen. Switches between 2D and 3D modes. Rotate the photo by 90 degrees to the left. Rotate the photo by 90 degrees to the right. Example ...
Enjoying Photo/Music/Video Playback 4 Press RETURN to display the thumbnail selection screen, and then press C to start the slide show and the background music. • All of the music files are selected by default. ■ Set/Reset All Slide Show Image Set or reset the images to be displayed. 1 Press D to display the USB MENU screen. 2 Press a/b to select "Set All Slide Show Image"/ ■ Select Slide Show Interval Specify the length of time before the next image appears. 1 Press D to display the USB MENU screen.
Enjoying Photo/Music/Video Playback Video Mode Example ... video 1 video 2 video 3 VIDEO_01.avi VIDEO_02.divx VIDEO_03.divx VIDEO_04.avi VIDEO_05.divx VIDEO_06.divx VIDEO_07.avi video 4 video 5 I I I I I I I ... 3:42 4:55 4:35 4:08 4:20 3:55 4:26 Buttons for file selecting operations Buttons a/b/c/d ENTER Music Mode Example ... music 1 music 2 music 3 music 4 music 5 I I I I I I I SONG_01.MP3 SONG_02.MP3 SONG_03.MP3 SONG_04.MP3 SONG_05.MP3 SONG_06.MP3 SONG_07.MP3 SONG_03.MP3 ...
Enjoying Photo/Music/Video Playback ■ Using the operation panel You can use the operation panel for video playback operations. You can call up this operation panel by pressing MENU after you press a/b to select "USB Operation Panel" from "System Options" > "View Option". USB Menu Menu for file selecting operations Example USB MENU Set All Auto Play Reset All Auto Play System Options PLAY * Remove USB Device 0:04:11 / 0:07:42 * See page 49 for details on the Remove USB Device function.
Enjoying Photo/Music/Video Playback DivX® Setup This is the function to confirm your registration code. You need to register the code at http://www.divx.com. USB Device Compatibility 1 Press MENU to display the menu screen. 2 Press c/d to select "Initial Setup", and then press File system Photo file format USB device ENTER. 3 Press a/b to select "DivX® Setup", and then press ENTER. ® ■ DivX VOD registration You can find your registration code on this menu. You need to register the TV at http://www.
Enjoying Photo/Music/Video Playback Playing Back Files on a Home Network (DLNA) Server Viewing Individual Photos The photo selected on the thumbnail selection screen is displayed. Buttons for individual display operation Buttons c/d RETURN 3D A (red) B (green) • Rotating photos only applies to the temporarily selected item and this setting is not saved. • In 3D mode, you cannot rotate the photos.
Enjoying Photo/Music/Video Playback Video Mode Example /Root/Videos/Folders/ Videos wmv VIDEO_02 VIDEO_03 VIDEO_04 VIDEO_05 VIDEO_06 VIDEO_07 4:55 4:35 4:08 4:20 3:55 4:26 Buttons for file selecting operations Buttons a/b/c/d ENTER Music Mode Example /Root/Music/Folders/Music Folder1 Folder2 Folder3 SONG_03 SONG_04 SONG_05 SONG_06 SONG_07 4:35 4:08 4:20 3:55 4:26 RETURN Buttons for playing mode Buttons a Buttons for music mode Buttons a/b/c/d ENTER RETURN B (green) C (blue) Description Select a de
Other Viewing Options Presetting Remote Control Function Operating the Connected Equipment You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, BD, LD) using the presetting manufacturer function of your remote control unit. To operate the connected equipment, press STB, DVD•VCR or AUDIO to select your device. (STB (cable/satellite set-top box), DVD, BD, VCR or AUDIO.) The remote control unit button will function as follows.
Other Viewing Options Manufacturer codes VCR BRAND AUDIO DYNAMICS BROCKSONIC CANON CRAIG CURTIS MATHIS DBX EMERSON GE INSTANT REOLYA JC PENNEY JVC KENWOOD MAGNAVOX MAGNIN MEMOREX MONTGOMERY WARD NEC PANASONIC PENTAX PHILCO PHILIPS QUASAR REALISTIC SAMSUNG SHARP SONY SYLVANIA TATUNG TEAC TMK YAMAHA DVD/BD/LD BRAND DENON JVC KENWOOD MAGNAVOX MARANTZ MITSUBISHI PANASONIC PHILIPS PIONEER PROSCAN RCA SAMSUNG SHARP SONY TOSHIBA YAMAHA ZENITH REMOTE CONTROL CODE NUMBER 09 13 04 12 04 09 10, 13, 14 04 04 04 09
Using AQUOS LINK Controlling HDMI Equipment Using AQUOS LINK What’s AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD). • By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV. • AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.
Using AQUOS LINK AQUOS LINK Setup Example System Options Menu System Options AQUOS LINK Setup AQUOS LINK Control [On] Auto Power On [Yes] Selecting Recorder Channel Select Key Audio Return Channel [Auto] 1 Press MENU to display the MENU screen, and then press c/d to select "System Options". 2 Press a/b to select “AQUOS LINK Setup”, and then press ENTER. 3 Press a/b to select a specific item, and then press Channel Select Key This function can be set for each input terminal.
Using AQUOS LINK Link Operation Menu Menu Link Operation Link Operation Link Operation Menu Link Operation Recorder Power On/Off Start Recording Device Operation panel Stop Recording Play from Rec. List One Touch Recording This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINKcompatible equipment with a recording function by simply pressing (REC on the remote control. Prepare the connected AQUOS LINK-compatible recorder for recording.
Using AQUOS LINK Using the Device Operation Panel You can use the device operation panel to control playback operations. 1 Press OPTION to display the Link Operation Menu screen. 2 Press a/b to select “Device Operation Panel”, and then press ENTER. 3 Press a/b/c/d to select the desired operation. • This function works only when AQUOS LINK-compatible equipment with the Device Operation Panel function is connected.
Using a PC Displaying a PC Image on the Screen VIEW MODE You can select the screen size. 1 Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or a/b while the View Mode menu is displayed to select a desired item on the menu. • You can sequentially select a View Mode that has its own aspect ratio. • • • • Connect the PC before making adjustments. (See page 17.
Using a PC Example Menu System Options Audio Select System Options View Option 3D Setup AQUOS LINK Setup Input Terminal Setting Menu Design O ti L kO t 1 Press MENU to display the MENU screen, and then press c/d to select "System Options". 2 Press a/b to select "Input Terminal Setting", and 3 4 5 Setting Audio Input then press ENTER. Press a/b to select "PC input" or "Audio Select", and then press ENTER. Press a/b to select a specific adjustment item, and then press ENTER to set each item.
Using a PC Control of the TV • The TV can be controlled from a PC, control panels and other devices using the RS-232C or IP. • Use a cross-type RS-232C cable, ETHERNET cable (commercially available) or wireless LAN for the connections. • This operation system should be used by a person who is accustomed to using computers. ■ Communication conditions for IP Connect to the TV with the following settings made for IP on the PC.
Using a PC ■ Command table • Commands not indicated here are not guaranteed to operate.
Using the Internet By connecting your TV to a broadband system, you can access the Internet from the TV. • Display the latest Internet information and access a range of useful information for AQUOS users from the original home page*. • Use "AQUOS ADVANTAGE LIVE" to obtain the latest software and receive online user support. • You can enjoy a variety of streaming content and Internet applications. • You may not be able to view 3D images when accessing the Internet.
Using the Internet + Using the wireless LAN This TV is equipped with a wireless LAN function. For a wireless LAN connection, you must use "Wireless Setup" to connect the access point and TV. (See page 67.) PC Wireless LAN router/ access point Modem Internet • This TV has a built-in wireless LAN function. Using a separate wireless USB LAN adapter may result in radio communications that do not comply with regulations on radio communications. Therefore, do not use a separate wireless LAN adapter.
Using the Internet Internet Setup Example Initial Setup Menu 5 Press a/b to select "Push button", and then press ENTER. • To configure the setting via PC, select "PIN code". Follow the on-screen instructions and the operation manual of the access point to configure the settings. 6 Select "Next" to complete the settings. • The connection process starts and the WPS button on the access point can be pressed. Initial Setup 7 Press the WPS button on the access point.
Using the Internet Displaying Updated Information and Support Service This function can be used to display up-to-date information on the original home page and allow you to receive support service over the network. Original Home Page + If you cannot connect to the Internet Perform the procedures below to check your TV's network settings. IP Setup 1 Press EXIT to exit from the connected TV feature. 2 Press MENU to display the MENU screen, and then press c/d to select “Initial Setup”.
Using the Internet Entering Text (Software Keyboard) When you are editing an input screen or specifying the Ethernet settings used for accessing the Internet, enter text from the software keyboard. Caps Off/Caps On/Caps Lock If “alphabet” is selected in “Character Set”, this switches characters between uppercase and lowercase.
Using the Internet Using the Browser ENTER, a/b/c/d • Press a/b/c/d to select a link that you want to jump, and then press ENTER. EXIT About links • Web pages on the Internet often include “links” that allow you to jump to other web pages (or sites). • “Links” can take various forms, including words or images, but they always work in the same way letting you jump to the link destination when you select them. • Selected items (such as links of text input fields) are enclosed in a yellow frame.
Using the Internet Using the Toolbar Using Tabs You can use the toolbar to control the browser and to specify settings. You can use tabs to view up to 3 web pages at the same time. Each page appears in a separate tab, and you can switch between the tabs. 1 Press B on the remote control unit to display the Tab menu. • You can also display the Tab menu by clicking “ the toolbar. Selected item 1 Press D on the remote control unit to display the toolbar.
Using the Internet Saving the URL of the Current Page Adding a web page to your bookmarks allows you to return to that page later by simply selecting it from your list of bookmarks. Editing Bookmarks You can rearrange or delete the bookmarks. ■ Switching between the URL and title name 1 Press D on the remote control unit to display the toolbar. 2 Press c/d to select “ ” in the toolbar, and then press ENTER. • Your bookmarks list is displayed.
Using the Internet Browser Settings You can check or modify your browser settings from the Browser menu. The Browser menu includes a display settings menu and a security settings menu. 1 Press D to display the toolbar. 2 Press c/d to select “ ” in the toolbar, and then press ENTER. 3 Press c/d to select the settings menu you want to access. Security Settings Security: Save Setting: If you select this option, a message is displayed when you move from a protected page to an unprotected page.
Using the Internet Using Applications via the Internet By connecting the TV to the Internet, you can enjoy a variety of broadband content, including videos, movies, music, photos, and games. Please check that the most current software is loaded on TV by selecting "Auto Update Setting" on "Software Update" (see page 38) or by visiting http://www.sharpusa.com/products/support/ to check for a download of the newest software version. Example Information Menu Information Identification Digital Caption Info.
Using the Internet DISCLAIMERS This Sharp device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party content and services must be in accordance with any authorization or terms of use provided by such content or service provider. Sharp shall not be liable to you or any third party for your failure to abide by such authorization or terms of use.
Appendix Removing the Stand • Before detaching (or attaching) the stand, unplug the AC cord. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. Before attaching/detaching the stand • Before performing work, make sure to turn off the TV. 1 2 Unfasten the four screws used to secure the stand in place. Detach the stand from the TV. • To attach the stand, perform the above steps in reverse order.
Appendix Setting the TV on the Wall CAUTION • This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. • Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
Appendix Troubleshooting Problem Possible Solution • No power • Check if you pressed POWER on the remote control unit. • Is the AC cord disconnected? Page 9 • Has the power been turned on? Page 18 • Unit cannot be operated. • External influences such as lightning, static electricity, may cause improper operation. In this case, operate the unit after first turning off the power of the TV or unplugging the AC cord and replugging it in after 1 or 2 minutes. • Remote control unit does not operate.
Appendix Problem Possible Solution • No picture • • • • Is connection to other components correct? Pages 13 to 17 and 57 Is the correct input selected? Pages 13 and 22 Is "On" selected in "Audio Only"? Page 30 If the PC image is not displayed, check the following: - When connecting a laptop PC to the TV, check that display output mode of the PC is set to external monitor. - Check the resolution setting on the PC. Is a non-compatible signal being input? Page 62 • Picture quality of HD programs is poor.
Appendix CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. Select an item from the list below to display the secret number input screen. (For operating the on-screen display menu, see page 25.) System Options menu). • "Color system" ( "Input Terminal Setting" • "EZ Setup" or "Reset" ( Initial Setup menu). • "CH Setup” ( "Broadcasting Setup" Initial Setup menu). • "Parental CTRL" ( "Individual Setup" Initial Setup menu).
Specifications TV Item LCD panel Model: LC-70LE735U Size 70o Class (69 1/2o Diagonal) Resolution 2,073,600 pixels (1,920 g 1,080) TV-standard (CCIR) TV Function Receiving Channel American TV Standard ATSC/NTSC System VHF/UHF VHF 2-13ch, UHF 14-69ch CATV 1-135ch (non-scrambled channel only) Digital Terrestrial Broadcast (8VSB) 2-69ch *1 Digital cable (64/256 QAM) Audio multiplex 1-135ch (non-scrambled channel only) BTSC System 10W g 2 Audio out HDMI 1 HDMI 2 Back panel HDMI 3 vertical HDMI
Specifications Wireless LAN FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Information on the Software License for This Product ■ Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
Information on the Software License for This Product ■ Software Copyrights XMLRPC-EPI Copyright 2000 © Epinions, Inc. libjpeg This software is copyright © 1991-1998, Thomas G. Lane. Portions of this software are based in part on the work of the Independent JPEG Group. OpenSSL Copyright © 1998-2008 The OpenSSL Project. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org) SSLeay Copyright © 1995-1998 Eric Young (eay@cryptsoft.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
86 LC-70LE735U_E.
Dimensional Drawings Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) 2 1/64 (51)*2 63 1/ 2 3 1/2 (89) (1613) 5 23/64 (136) 13 1/8 (333) 21 7/64 (536) 15 3/4 (400) 8 15/32 (215) 38 9/32 (972) 15 3/4 (400) 4 1/2 (114) 7 31/64 (190) 5° 10 9/32 (261) 21 3/16 (538) 34 3/32 (865.62)*1 38 25/64 (975) 39 45/64 (1008) 60 19/32 (1538.88)*1 5 25/64 (137) 7 59/64 (201) AN-52AG4 *1 *2 LC-70LE735U_E_Cover.
FRANÇAIS ENGLISH LC-70LE735U LC-70LE735U OPERATION MANUAL SHARP ELECTRONICS CORPORATION ESPAÑOL LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN MODE D'EMPLOI Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION MANUAL DE OPERACIÓN Printed in Mexico Imprimé au Mexique Impreso en México TINS-F207WJZZ 11P07-MX-NM IMPORTANT : Please read this operation manual before starting operating the equipment.
Experiencing HD Images [ENGLISH] In order to view the highest quality picture on your HDTV, you need High-Definition (HD) programming. You must get HD programming to get an HD picture. HDTV Programming Connection Guide Guide de Connexion Guía de Conexión In order to view the best possible picture, you will need to upgrade your current TV service to include HD programming, if you have not already done so. An HDTV without an HD source is just an ordinary TV.
ENGLISH To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. Connecting an Antenna/Cable Connecting an HD Cable/Satellite Set-top Box Check the type of antenna cable you are using. (for receiving cable-TV without a set-top box, including unscrambled cable HD channels, or off-air HDTV broadcasts) ■ When using HDMI cable (HDMI 1, 2, 3 or 4): Home Antenna terminal (75-ohm) 1.
