MODEL LC-70LE735X LCD COLOUR TELEVISION OPERATION MANUAL
OPERATION MANUAL ENGLISH Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read Important safety precautions carefully before using this product. Contents Introduction................................................................. 3 Precautions For Daily Use ....................................... 3 Important safety precautions................................... 3 Supplied accessories ...
Connecting a PC....................................................... 57 Connecting a PC .................................................. 57 Displaying a PC image on the screen .................... 57 Selecting the picture size .................................. 57 Adjusting the PC image automatically ............... 58 Adjusting the PC image manually ..................... 58 PC control of the TV ............................................. 59 Command list ...............................................
Introduction Precautions For Daily Use Observe the following items Maintenance of the cabinet • When cleaning the cabinet, use a soft cloth (made of cotton, floss, etc.) to clean gently. • Do not use a dry or damp rag mixed with chemicals, as this could cause the ingredients of the cabinet body to deteriorate or crack. • Be careful not to use an abrasive cloth for cleaning or clean with excessive force, as this could scratch the surface of the cabinet.
Introduction • Do not place vases or any other water-filled containers on this product. The water may spill onto the product causing fire or electric shock. • Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product.
Introduction Supplied accessories Remote control unit ( x 1) “AAA” size battery ( x 2) AV cable ( x 1) Pages 9 and 11 Page 9 Page 26 Stand unit Operation manual Page 7 Optional accessories The listed optional accessories are available for this LCD colour TV. Please purchase them at your nearest shop. • Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability. No.
Preparation Protection against overturning There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tipresistant measurement for your safety. Anchoring the TV to the wall or a pillar 1 Affix the TV to the wall or a pillar using View from the top extra strong ties and cup hooks. n o Wall Cup hook (commercially available) Tie (commercially available) Fixing the TV to the table 1 Place the TV on the table.
Preparation 4 Attaching the stand unit Insert and tighten the four screws into the four holes on the rear of the TV. • Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged. CAUTION • Attach the stand in the correct direction. • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Preparation 4 Connecting the TV Bundle the cables. Notes on installing the TV • Avoid direct sunlight and place the TV in a well-ventilated location. • Place the TV in a level location. • Do not turn on the power of the TV before connecting the AC cord. 1 Connect the antenna cable. p o n Standard DIN45325 connector (IEC169-2) Antenna cable (75-ohm coaxial type: commercially available) Room antenna terminal (75-ohm type) 2 Connect external devices.
Preparation Using the remote control unit Inserting the batteries Before using the TV for the first time, insert two supplied “AAA” size batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries. 1 Open the battery cover. 2 Insert the two supplied “AAA” 3 Close the battery cover. size batteries. • Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.
Part names and functions TV (front/side view) Remote control sensor OPC sensor*1 OPC indicator SLEEP indicator POWER indicator I OPC: Optical Picture Control (Page 30) TV (rear view) RS-232C terminal PC terminal INPUT 2 (VIDEO/AUDIO (L/R)) terminal INPUT 3 (Component/ AUDIO (L/R)) terminal OUTPUT (Headphones/ AUDIO (L/R)) terminal USB 1 port HDMI 1 (HDMI/ARC) terminal (INPUT 4) HDMI 2 (HDMI) terminal (INPUT 5) HDMI 3 (HDMI) terminal (INPUT 6) HDMI 4 (HDMI) terminal (INPUT 7) INPUT 1 (AV IN) terminal
Part names and functions Remote control unit 1 15 2 16 3 4 5 6 7 17 8 9 18 19 10 11 12 20 21 22 13 14 23 24 25 1 2 3 4 5 6 7 8 9 POWER (Standby/On) To switch the power on and off (Page 15). ATV (Analogue TV) Press to access analogue TV mode (Page 16). DTV (Digital TV) Press to access digital TV mode (Page 16). AQUOS LINK buttons If external equipment such as a AQUOS BD player is connected via HDMI cables and is AQUOS LINK compatible, you can use these AQUOS LINK buttons.
Quick guide What is the HOME? You can easily launch to enjoy Internet connection and Home network functions and to perform settings for the TV from this “HOME” screen. Basic operation Display the HOME screen Exit the HOME screen Press HOME and the “HOME” screen displays. The operation will exit the “HOME” screen if you press B before it is completed. Select an item Selecting in the HOME. Press a/b/c/d to select the desired service or menu, and then press A.
Quick guide Using software keyboard Use the software keyboard when you need to input text. Char.Set Caps Done Clear Cancel Delete Cursor Left 1 2 3 4 5 Char. Set Changes character set into the alphabet, numbers, symbols, etc. Caps Changes characters to capital/lower case. Done Confirm the entry. Cancel Abort input and close the software keyboard. R/G/Y/B (Colour) buttons Selects the coloured items on the screen. Caps 6 7 8 9 Char.Set Input cursor Press c/d to move the cursor when highlighted.
Quick guide Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. Confirm the following before turning on the power E Is the antenna cable connected? E Is the AC cord plugged in? 1 Press < on the TV. • The initial auto installation wizard appears.
Watching TV Daily operation Turning on/off the power—using the TV Turning on/off the power 1 Turn on the power. Press < on the TV (after a few seconds, an image appears with sound). • Wait more than five seconds until you press < on the TV after inserting the power plug. 2 Turn off the power. Switch it off by pressing < on the TV.
Watching TV Switching between digital and analogue broadcasts Programme information (DTV) Option Watching digital broadcasts Watching analogue broadcasts Programme info. While watching DTV you can check the extended programme information on the screen using INFO on the remote control. Programme guide You can check the current schedule of DTV events and view detailed information about current events. 001 DTV TV1 SD Moving 20:00 - 21:00 HProgramme info. 1 2 Press A to display the programme guide list.
Watching TV Switching the digital audio format If multi sound modes are received, each time you press MPX the mode switches as follows. Audio (ENG) L/R When receiving a bilingual signal Each time you press MPX, the mode switches among NICAM CH A, NICAM CH B, NICAM CH AB and MONO. Bilingual mode STEREO L R ATV LR ATV CH A Audio (ENG) CH A CH B CH A CH B CH AB ATV Audio (ENG) MONO Press c/d to select L or R sound when the STEREO or DUAL MONO screen is displayed.
Watching TV Teletext View setting Text language What is teletext? Teletext broadcasts pages of information and entertainment to specially equipped TV. Your TV receives teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available. Turning teletext on/off 1 2 3 Select a TV channel or external source providing a teletext programme.
Watching TV View setting Initial teletext page If you set the language of the initial page (this page is displayed for the first time after pressing m) for teletext in DTV mode, it will start from the selected language page. 1 Go to “HOME” > “TV Menu” > “Setup” > “View setting” >“Individual setting” > “Initial teletext page”. 2 Press a/b/c/d to select the desired language, and then press A. NOTE • This function is available for teletext in DTV mode.
Watching TV Option EPG EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule of DTV/ RADIO/DATA, view detailed information about them, tune to an event currently on-air. Useful settings for using EPG Basic setting Genre icon setup You can grey out or place a mark on desired genres and smoothly search for programmes you frequently watch. 1 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “EPG setup” > “Genre icon setup”.
Watching TV Selecting a programme using EPG Basic operation E Display the EPG screen Today EPG [DTV-TV] Press EPG. 001 TV1 20:00 - 21:00 [Sat]2 [Sun]3 [Mon]4 [Tue]5 [Wed]6 [Thu]7 [Fri]8 [Fri] 1/4 20:00 SD Moving 20 21 22 23 0 1 TV1 001 SD Moving SD Moving SD Moving TV2 002 HD ColorBar HD ColorBar HD ColorBar TV3 003 H264 SD-Color P...
Watching TV 4 Search a programme in a category 1 2 3 Press G. Press a/b to select the desired genre, and then press A. Press a/b to select a programme you want to watch, and then press A. EPG [DTV-TV] Today [Sat]2 [Sun]3 [Mon]4 [Tue]5 [Wed]6 [Thu]7 [Fri] 1/4 20:00 [Fri]8 Search by genre [Today] 1 12-0 [Sat] 2 0-12 [Sat] 2 12-0 [Sun] 3 0-12 Movie News Entertainment Sports Children’s Found no programme by the genre.
Watching TV Timer setup using EPG You can switch to a programme at a set time. 1 Press EPG. 2 Press a/b/c/d to select the programme you want to set, and then press A. Programme info. Back to EPG Next Watch 3 No Press c/d to select “Watch”, and then press A. • If you select “No”, the TV returns to the EPG screen. 4 Press c/d to select “Yes”, and then press A. • The selected TV programme is marked with an icon. 5 Press A to select “Back”. Cancelling the timer setup 1 2 3 4 Press EPG.
Connecting external devices E Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality to maximise the potential of the TV and the connected device. • Refer to page 57 for connecting a PC to the TV.
Connecting external devices E When using the HDMI 2 terminal Video connections You must set the audio signal input source depending on the type of HDMI cable connected (refer to page 39 for details). HDMI connection Example of connectable devices E DVD player/recorder E Blu-ray player/recorder E Game console The HDMI connections permit digital video and audio transmission via a connection cable from a player/ recorder.
Connecting external devices * This terminal is also used for headphones. Reduce the volume before using headphones. Overwhelming sound may damage your hearing. VIDEO connection Example of connectable devices NOTE E E E E • Optical digital audio will be output in 2-ch stereo when it is from the external equipment connected to the TV using an HDMI cable. • If the image is not in sync with the audio, check the settings of the connected surround system.
AQUOS LINK Controlling HDMI devices using AQUOS LINK E What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit. By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV.
AQUOS LINK AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD player/AQUOS recorder that supports the HDMI CEC protocol. NOTE • Refer to the operation manual of the device to be connected for further details. • After unplugging connection cables or changing the connection pattern, turn on the power of the TV after all relevant devices’ power have been turned on.
AQUOS LINK AQUOS LINK menu Go to “HOME” > “TV Menu” > “Link operation” > select the menu you want to set. Link Operation Recorder power on/off Top menu/title list Setup menu Media change Recorder EPG Description • Refer to the operation manual of the recorder for details. This section explains how to play back a title in the AQUOS BD player/AQUOS recorder. Press @ to hide the menu screen to operate a/b/c/d buttons. Select the title with a/b/c/d, and then press I.
Basic adjustment NOTE Picture settings I Go to “HOME” > “TV Menu” > “Setup” > “Picture”. Menu Setup CH list :Enter :Exit J “PC” is available only when selecting “HDMI1”, “HDMI2”, “HDMI3”, “HDMI4” or “PC” from the “INPUT” menu. “x.v.Colour” is available only when accepting an “x.v.Colour” signal through an HDMI terminal. • You can select a different “AV mode” item for each input mode (for example, select “STANDARD” for TV input and “DYNAMIC” for VIDEO input).
Basic adjustment NOTE Picture Advanced This TV provides various advanced functions for optimising the picture quality. Go to “HOME” > “TV Menu” > “Setup” > “Picture” > “Advanced”. • This effect is greater on fast moving images. • This function will have no effect in the following cases. 1) The type of signal received is a PC signal. 2) An OSD is being displayed. 3) Teletext is activated. • If images appear blurred, set to “Off”. Quad pixel plus Reproduces high-definition images with higher resolution.
Basic adjustment Audio settings Audio SRS TS HD Go to “HOME” > “TV Menu” > “Setup” > “Audio”. Menu CH list :Enter Setup This function produces a surround effect from the speakers. :Exit Item On SRS TruSurround HD™ creates a high quality surround sound experience, when watching DVD movies and TV programmes broadcast in surround sound. Off Outputs normal sound. Audio STANDARD Auto volume [Off] Treble Bass Audio Balance L30 R30 Audio This function allows you to enjoy bass-enhanced sound.
Basic adjustment Power save settings ECO No signal off Go to “HOME” > “TV Menu” > “Setup” > “ECO”. Menu CH list :Enter Setup :Exit When set to “Enable”, the TV will automatically enter standby mode if there is no signal input for 15 minutes. NOTE • Even if a TV programme finishes, this function may not operate because of interference from other TV stations or other signals.
Basic adjustment 3 Channel settings Go to “HOME” > “TV Menu” > “Setup” > “View setting”. Menu CH list :Enter The “Digital setting” screen displays, and then press A. Press a/b to select the desired menu item, and then press A. Press c/d to select “Yes”, and then press A. 4 5 Setup :Back Additional search View setting Auto installation Use this menu to add new services automatically after “Auto installation” has been completed.
Basic adjustment Analogue setting Sound sys. 1 2 Repeat steps 1 and 2 in Digital setting. The “Analogue setting” screen displays, and then press A. 3 Repeat steps 4 and 5 in Digital setting. NOTE • The “Analogue setting” menu is available only for watching TV in ATV mode. Additional search Use this menu to add new services automatically after “Analogue search” in the “Auto installation” menu has been completed. • Start searching channels after selecting the colour system and sound system.
Useful viewing functions TV Start-up time setting View setting NOTE • To view a locked channel, you must enter the password (see page 35 for locking channels password). When you select a locked channel, a password prompt message pops up. Press C to display the password input window. E Deleting the password Quick start You can reduce the TV’s start-up time after turning on the power with the remote control unit. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Quick start”.
Useful viewing functions Individual setting—time View setting Time display Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Time display”. E Switching the multi audio languages Each time you press MPX on the remote control unit, the audio language switches. NOTE • This function depends on audio language information from broadcasters. • If audio for the selected language is not included in a received broadcast, audio will not be output for that language.
Useful viewing functions Item (for SD [Standard-Definition] signals) Optional features settings Go to “HOME” > “TV Menu” > “Setup” > “Option”. Menu CH list :Enter Normal Keeps the original aspect ratio in a full screen display. Zoom 14:9 For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and bottom with some programmes. Panorama In this mode, the picture is stretched toward each side of the screen.
Useful viewing functions Skipping specified inputs Option 4:3 mode Option The “WSS” signal has 4:3 auto-switching that allows you to select between “Normal” and “Panorama”. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “4:3 mode”. Item Normal Normal range keeping 4:3 or 16:9 aspect ratio. Panorama Wide image without side bars. Input skip This setting allows you to skip the inputs on the input source selection operation. Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input skip”.
Useful viewing functions Option Option Input label Headphone/Audio out select You can label each input source with a custom description. 1 Press # to select the desired input source from the “INPUT” menu, and then press A. 2 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input label”. 3 Select each character of the new name for the input source with using the software keyboard (Page 13). 4 Repeat the above until the name is fully spelt out, and then press @.
Useful viewing functions Additional features Option Channel selecting effect Option This function shows a screen effect when choosing or changing channels. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Screen effect” > “Channel selecting effect”. Option Game play time This function allows you to display the elapsed time on the screen when “AV mode” is set to “GAME”. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Game play time”.
Network function Connecting to the network E How to connect Router To enjoy internet services, you need to connect the TV to a router with a high speed connection to the internet. You can also connect the TV to your Home network server through a router or access point. The TV connection to the router can either be wired or wireless. NOTE • If you choose a wired connection to the router, you need an ETHERNET cable (commercially available).
Network function Wireless installation Use the wireless LAN USB adapter (optional accessory). E Wireless connection overview 4 5 6 7 8 Press c/d to select “Wireless”, and then press A. Select “OK” to confirm. Press a/b to select “Wireless setup” in the “Network setup” menu. Press c/d to select “Change”, and then press A. Press a/b to select “WPS”, and then press A.
Network function Specifications (Wireless LAN USB adapter) Product name 802.11n Dual Band WLAN adapter Standard IEEE 802.11a/b/g/n Host interface USB Frequency band 2412_2484 MHz 5150_5850 MHz Security Static WEP (64/128 bit, key index 1 only) WPA-PSK (TKIP) WPA2-PSK (AES) Modulation DBPSK@1 Mbps DQPSK@2 Mbps CCK@5.5/11 Mbps BPSK@6/9 Mbps QPSK@12/18 Mbps 16-QAM@24 Mbps 64-QAM@48/54 Mbps and above, Rx up to 300 Mbps Transmit power and sensitivity Tx output power: (Typical) 2.
Network function 4 Using AQUOS.NET By connecting the TV to the Internet, you can enjoy a variety of broadband content. 1 Press HOME to display the “HOME” screen. 2 Press a/b/c/d to select the “AQUOS.NET” service, and then press A. Press a/b/c/d to select a function, and then press A. Selected item Displays the AQUOS.NET Top page. Returns to the previous page. HOME LAN Description USB Goes back to the original page after viewing the previous page. TM Refreshes the page.
Network function Clear browser setting You can clear browser settings, which include cookies, bookmarks and caches. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Clear browser setting”. NOTE • Password input is required when executing “Clear browser setting” if password is set. CAUTION • If you perform this operation, browser settings will be completely cleared. If there is important information, take notes before executing.
Network function DISCLAIMERS This Sharp device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party content and services must be in accordance with any authorization or terms of use provided by such content or service provider. Sharp shall not be liable to you or any third party for your failure to abide by such authorization or terms of use.
Other useful features NOTE Using a USB device The TV provides you some functions using a USB device. You can select which function to use after inserting a USB device in the USB port, and the TV starts the settings for each function. USB usage E Storage device for time shift E USB media to enjoy photos, music and videos • When you have inserted two or more USB storage devices in the ports, an error message appears. Insert only one USB storage device for time shift.
Other useful features NOTE Time shift This function enables you to pause the digital TV programme you are watching and start watching it again from the paused scene. 1 Press READY. • The TV starts temporary recording of the real time broadcast in the background. 2 Press I. • The TV shows the programme from the scene that the TV started recording and the recording carries on. • When the TV again playbacks after once pressing H to stop the programme, the TV shows the programme from the stopped scene.
Other useful features Examples of time shift usage When you move away from the TV for a while (press READY when you move away from the TV) Display information regarding time shift Channel display Channel information displays by pressing DISPLAY on the remote control unit. Without time shift Away You miss the scene while you are away.
Other useful features Option Option Auto input selection Device check You can choose whether or not to switch the input source automatically when receiving an AQUOS LINK compatible signal on the TV during time shift operations. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Time shift setting” > “Auto input selection”. Item Enable Release time shift when receiving an AQUOS LINK compatible signal. Switch input source automatically. Disable Time shift continues to work.
Other useful features USB media/Home network USB media/Home network Selecting modes and drives/servers 1 In both modes, you can enjoy viewing photos, listening to music and watching videos from external USB devices (USB Memory, USB card reader (Mass Storage Class), USB HDD) or Home network server. NOTE USB media mode (Example) 1 • To connect a Home network server, refer to Network function (Pages 42 and 43). • Home network function is available via Windows 7.
Other useful features Photo mode Viewing enlarged photos Buttons for enlarged photo display operation (When using USB media mode) Viewing thumbnails Buttons c/d (Cursor) C Return to the thumbnail selection screen. R button Rotate the photo by 90 degrees to the left. G button Rotate the photo by 90 degrees to the right. B button * This screen image is for the USB media mode. It may be slightly different in the Home network mode.
Other useful features E Slide show Slide show Buttons for slide show operation (When using USB media mode) E Selecting the BGM Setup the slide show BGM from “Select slide show BGM” by pressing B when selecting photo thumbnails. This function is available only for the USB media mode. Buttons Description C Return to the previous operation. DISPLAY Reveal/hide the guide display. B button Display the “USB media menu”.
Other useful features Buttons Video mode 16 Files 8 Files 15 Files 15 Files 10 Files Buttons for file selecting operations (When using USB media mode) Buttons Description Description C Go back to the file selection screen. R button Start playback from the previously stopped scene.*1 G button Stop a video. CONTROL or Y button Display the USB control panel. B button Display “USB media menu”.
Other useful features USB device compatibility Selecting the picture size for video mode You can select the picture size in “Video mode”. 1 Select “Video mode”. 2 USB device USB memory, USB card reader (Mass Storage class), USB HDD • Refer to Selecting modes and drives/servers on page 52. File system FAT/FAT32/NTFS Press WIDE. Photo file format JPEG (.jpg) (DCF2.0 compliant) Music file format MP3 (.
Connecting a PC Connecting a PC Displaying a PC image on the screen HDMI connection Selecting the picture size PC HDMI 1, 2, 3 or 4 terminals n You can select the picture size. 1 Press WIDE. • The “Wide mode” menu displays. 2 Press WIDE or a/b to select the desired item. EXAMPLE HDMI-certified cable PC HDMI 2 terminal* Input signal o 1024g768 1360g768 p DVI/HDMI cable ø 3.5 mm stereo minijack Normal Keeps the original aspect ratio in a full screen display.
Connecting a PC Adjusting the PC image automatically Adjusting the PC image manually Option Option Fine sync. Auto sync. This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc. 1 Press # to select “PC” from the “INPUT” menu, and then press A. 2 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “PC signal setting” > “Auto sync.”.
Connecting a PC PC control of the TV • When a programme is set, the TV can be controlled from the PC using the RS-232C or IP. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Use an RS-232C serial control cable (cross type), ETHERNET cable (commercially available) or wireless LAN USB adapter for the connections.
Connecting a PC Command list CONTROL ITEM POWER SETTING INPUT SELECTION COMMAND PARAMETER CONTROL CONTENTS CONTROL ITEM POSITION WIDE MODE 60 CONTROL CONTENTS T E 0 _ _ _ TOGGLE O W R 0 _ _ _ POWER OFF (STANDBY) M U T E 1 _ _ _ MUTE I T G D _ _ _ _ INPUT SWITCHING (TOGGLE) M U T E 2 _ _ _ MUTE OFF ATV (CHANNEL FIXED) A C S U 0 _ _ _ SRS TS HD TOGGLE A C S U 1 _ _ _ SRS TS HD ON A C S U 2 _ _ _ SRS TS HD OFF A C H A _ _ _
Appendix Troubleshooting Problem Possible solution • No power. • Is the AC cord disconnected? • Check if you pressed < on the TV. • When the power switch does not work, remove the power plug and insert it again, and press < on the TV after waiting more than five seconds. • The TV cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper operation.
Appendix Reset If complex adjustments are made so that the settings cannot be restored to normal, you can reset the settings to the factory preset values. 1 Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Reset”. 2 If you have already set the password, enter it here. 3 Press c/d to select “Yes”, and then press A. Updating your TV via DVB-T Ensure that your TV software version is always up to date. From time to time SHARP will make updated TV base software and DVB software available.
Appendix Getting information Updating your TV via USB/Network Information Information Message list Software update When new software is detected, you can confirm the update information and download the software from “Message list”. Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Message list”. NOTE This function allows you to update to the latest software via a USB device or network. 1 Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Software update” > “USB update”.
Appendix Information on the software licence for this product Software licence You can read the software licences in this menu. Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Software licence”. E Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
Appendix Specifications Item LC-70LE735X Resolution 1,920 x 1,080 Video colour system TV function TV-standard Receiving channel PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 Analogue PAL ( B/G, D/K, I), SECAM ( B/G, D/K, K/K1), NTSC:(M) Digital DVB-T VHF/UHF 44.25–863.25 MHz TV tuning system Auto preset 02ch/07ch/09ch/10ch/28ch at Australia. STEREO/BILINGUAL NICAM ( B/G, I, D/K), A2 stereo (B/G), BTSC Audio amplifier 10 W x 2 Speaker (3.
Appendix Removing the stand For wall mounting with the optional bracket (AN-52AG4) remove the stand. Before setting TV on the wall • Remove the connected cables (DVD, VCR, etc) from the terminals. • Before performing work, make sure to turn off the TV. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. NOTE • To attach the stand, perform the above steps in reverse order. • As the TV is very heavy, be careful when moving it.
Appendix Mounting the TV on a wall To use this TV mounted on a wall, remove the cord holders and the screws at the 4 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV. • This TV should be mounted on a wall only with the wall mount bracket available from SHARP (Page 5). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Appendix Dimensional drawings LC-70LE735X 89*2 52*3 1613 136 538 865.62*1 975 1008 1538.88*1 333*4 536 383*5 400 972 190 215 400 114 261 5° 201 137 AN-52AG4 I J K L M Active area Including projecting part Thinnest part Including tip prevention brackets when stored Including tip prevention brackets when attached NOTE • Dimensions do not include protrusions such as screws and some parts.
Printed in Malaysia TINS-F359WJZZ 1 11P11-MA-NG