70" (175cm) Quattron Full HD LED LCD TV Manual

36
TV Start-up time setting
View setting
Quick start
You can reduce the TV’s start-up time after turning on
the power with the remote control unit.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Quick start”.
Item
On
The TV quickly starts up from standby.
34 W or more of power consumption is
required during standby.
Off
Power consumption is small during
standby.
Individual setting—password
View setting
Password
Allows you to use a password to protect certain settings
from being accidentally changed.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “Password”
.
E
Setting a password
Register a four-digit password number to use the
“Password” function.
1 If you already set the password, enter it here.
2 Press c/d to select “Yes”, and then press
A.
3 Enter the four-digit number as a password using
0_9 numeric buttons.
Password
Yes No
Setting Password. You can change or
clear Password
Enter your new password.
Use 4 digits
Enter the password again to confirm
4 Enter the same four-digit number as in step 3 to
confirm.
5 Press A.
NOTE
• To view a locked channel, you must enter the password (see
page 35 for locking channels password). When you select a
locked channel, a password prompt message pops up. Press
C to display the password input window.
E
Deleting the password
Allows you to reset your password.
1 Enter the password.
2 Press c/d to select “No”, and then press
C.
3 Press c/d to select “Yes”, and then press
A.
Password
Yes No
Delete password?
NOTE
• As a precautionary measure, make a note of your
password on page 68, cut it out and keep it in a safe
place that children cannot reach.
• This function is only available for TV input mode.
• To relock a channel which has been temporarily unlocked by
inputting the correct password, turn power off and then on again.
View setting
Parental rating
This function allows DTV services to be restricted. It
prevents children from watching violent or sexual scenes
that may be harmful.
1 Go to “HOME” > “TV Menu” > “Setup” > “View
setting” >“Individual setting” > “Parental rating”.
• Repeat steps 1 to 5 in Setting a password to the left.
Selected item Description
No block
Cancel the blocking.
age xx years
Select desired age to block.
(Example) If age 14 is selected,
programmes rated for ages of 15 or
more are blocked.
General and
above (G)
Content is not offensive to most viewers.
Parental
guidance and
above (PG)
Content is such that parents may
not want their children to view the
programme.
Mature and
above (M)
Mature audience only. This programme
is specifically designed to be viewed by
adults and therefore may be unsuitable
for children under 15.
Mature adult
and above (MA)
Mature adult only. This programme is
specifically designed to be viewed by
adults and therefore may be unsuitable
for children under 15.
Adult violence
and above (AV)
Not for children under age 15. Strong
elements of sex and/or violence.
Restricted and
above (R)
Not for children under age 18. Strong
elements of sex and/or violence.
Useful viewing functions