70" (175cm) Quattron Full HD LED LCD TV Manual

Protection against overturning

There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tip-

resistant measurement for your safety.

Anchoring the TV to the wall or a pillar

1 Affix the TV to the wall or a pillar using

extra strong ties and cup hooks.

View from the top

n o

Wall

 Cup hook (commercially available)

 Tie (commercially available)

Fixing the TV to the table

1 Place the TV on the table.

2 Pull the attached restraining bracket out so that it

is at a 90 degrees angle.

3 Insert commercially available screws in the holes

of the restraining bracket and tighten the screws

to secure the TV to the table.

• Use commercially available screws to firmly secure the

TV.

CAUTION

• As this product is heavy, use a table that is wide

enough to support the product and capable of

withstanding the product’s weight. The table should be

set where it will not be overturned.

• Be sure to use at least two people when moving the TV.

 Restraining bracket (attached)

 Screws (commercially available)

Preparation