OPERATION MANUAL ENGLISH ԋᙔ ⥝㵲 LC-42D65H/LC-46D65H LC-42D65H LC-46D65H ϕをᒝᕊ ᩮᓩྐ⨓㣌⿏ LCD COLOUR TELEVISION ϕをᒝᕊ OPERATION MANUAL Printed in Malaysia 㲬㇛Ռࣇ߱ TINS-E027WJZZ 08P12-MA-NF 4246D65H cover.
OPERATION MANUAL ENGLISH Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. ENGLISH Contents Introduction Dear SHARP customer ................................................................................................ 1 Contents ....................................................................................
Contents Watching TV (Continued) Reducing the start-up time ........................................................................... 26 Password setting for the child lock (for A-TV (Analogue TV)/D-TV (Digital TV) input mode) ...................................................................................................... 27 Energy conservation settings ................................................................................... 28 Auto power-off at a designated time ........................
Contents AQUOS LINK Controlling HDMI devices using AQUOS LINK ....................................................... 51 AQUOS LINK connection .......................................................................................... 52 Connecting an AQUOS BD Player via the AQUOS LINK-compatible audio system ............................................................................................. 52 Connecting an AQUOS BD Player only..........................................................
Important Safety Precautions • Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement. • Do not place vases or any other water-filled containers on this product. The water may spill onto the product causing fire or electric shock.
Supplied accessories Make sure the following accessories are provided with the product. Remote control unit Used with batteries inserted. Page 9 “AAA” size battery (g2) AC cord Page 13 Always use the AC cord supplied with the TV. Page 10 Cable clamp Stand unit LC-42D65H Stand post Short screws (g4) Long screws (g4) For bundling cables. Stand post Cloth Hex key Put all parts of the stand unit together and then attach it to the TV.
Preparation Attaching the stand • Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. CAUTION • Attach the stand in the correct direction. • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. 1 Confirm the 8 screws supplied with the TV.
Preparation Part names TV (Front/Side) POWER (On/Off) button MENU button TV/VIDEO button Channel up (r)/down (s) buttons Volume up (e)/down (f) buttons Remote control sensor OPC indicator* OPC sensor SLEEP timer indicator POWER indicator** *OPC: Optical Picture Control (See page 33.) ** See page 14 for the TV status indicator. • The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
Preparation TV (Rear) RS-232C terminal INPUT2 (HDMI) terminal INPUT1 (HDMI) terminals INPUT4 terminals INPUT7 (PC) terminals INPUT3 (HDMI) terminal AC INPUT terminal Headphone jack INPUT6 terminals DIGITAL AUDIO OUTPUT terminal INPUT5 terminals MONITOR OUT terminals Antenna input terminal Regarding the headphone jack • Use headphones with a stereo mini plug (Ø 3.5 mm). • Be sure to unplug headphones from the jack when they are not in use.
Preparation Remote control unit 7 VOLk/VOLl Set the volume. (See page 19.) e (Mute) Mute the sound. (See page 25.) 9 EPG DTV only : To display EPG (Electronic Programme Guide) screen. (See page 39 to 40.) 10 INFO D-TV only : Display the programme information. (See page 41.) 11 EXIT Return to the default screen. 12 P&P Set the split-screen picture mode. Press P&P again to return to normal view. (See page 24.) SELECT To select either screen to be active in split-screen mode. (See page 24.
Preparation Before turning on the power Notes on installing the TV • Avoid direct sunlight and place the TV in a well-ventilated location. • Place the TV in a level location. • Do not turn on the power of the TV before connecting the AC cord. 1 Connecting the antenna cable To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for coaxial cable.
Preparation Connecting external devices You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player, Digital TV Decoder (Set Top Box) and PC. To view external source images, select the input source from TV/VIDEO on the remote control unit or TV/VIDEO on the TV. CAUTION • To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital TV Decoder (Set Top Box), PC or other external equipment.
Preparation Connecting a Digital TV Decoder (Set Top Box) You can use the INPUT1/INPUT2/ INPUT3 (HDMI) or INPUT5/INPUT6 terminals when connecting to a Digital TV Decoder (Set Top Box) and other audiovisual equipment. NOTE • When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT1. (See page 48.
Preparation Inserting the batteries Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries. 1 Open the battery cover. 2 Insert the two supplied “AAA” size 3 Close the battery cover. batteries. • Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.
Preparation Turning the TV on/off Turning on the power Turning off the power Press POWER on the TV. • POWER indicator (Green): The TV is on. (After a few seconds, an image appears with sound.) • After turning the power “ON” by pressing POWER on the TV, you can turn the power ON/OFF by pressing POWER on the remote control. POWER button POWER button Press POWER on the remote control. • The TV enters standby mode and the image on the screen disappears.
Preparation About Menu operations H Using the control panel of the TV What is Menu? • You need to bring up the On-Screen Display to perform settings for the TV. The On-Screen Display for the settings is called “Menu”. • The Menu enables various settings and adjustments. (See pages 16 and 17.) • The Menu can be operated with the remote control unit. You can also operate the Menu using the control panel of the TV.
Preparation A-TV (Analogue TV)/D-TV (Digital TV)/AV input mode menu items List of A-TV (Analogue TV)/D-TV (Digital TV)/AV menu items to help you with operations Setup Picture AV Mode ..................................................................... Page 32 OPC ............................................................................. Page 33 Backlight .................................................................... Page 33 Contrast ..............................................................
Preparation PC input mode menu items List of PC menu items to help you with operations Setup Picture AV Mode ..................................................................... Page 32 OPC ............................................................................. Page 33 Backlight .................................................................... Page 33 Contrast ...................................................................... Page 33 Brightness ..............................................
Watching TV Setting channels automatically You can run auto installation again, even after setting up the preset channels. 4 If you have already set the password, enter it here. • See page 27 for setting a password. 5 6 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 Press a/b to select “Auto Installation”, and then press ENTER. MENU Press c/d to select “Yes”, and then press ENTER. Press a/b to select the desired language listed on the screen, and then press ENTER.
Watching TV Selecting programmes Adjusting the volume You can change channels in several ways. Using CHr/s on the remote control unit • Press CHr to increase the channel number. • Press CHs to decrease the channel number. NOTE • CHr/s on the TV operates the same as CHr/s on the remote control unit. Changing the volume You can change the volume on the TV or on the remote control unit. • To increase the volume, press VOLk. • To decrease the volume, press VOLl.
Watching TV Setting channels to your preference You can run the auto search procedure again at any time by accessing the Setup menu and Programme Setup. Channels can be tuned automatically or manually. Auto search Manual setting for each channel You can also automatically search by performing the procedure below. This is the same function as programme auto search in auto installation. 1 2 3 You can set some channel items manually.
Watching TV Manual setting for each channel (continued) Search tuning 1 Colour System Press a/b/c/d to select the channel you want to edit, and then press ENTER. 1 • The selected channel information displays. • The selected channel information displays. 2 Press a/b to select “Search”, and then press ENTER. MENU 2 Colour System menu Search Channel frequency settings Fine Sound System Label Press a/b to select “Colour System” and then press ENTER. • Receivable colour systems are listed.
Watching TV Manual setting for each channel (continued) Labelling channels When a TV channel sends its Network Name, the auto installation detects the information and assigns a name to it. However, you can change individual channel names. 1 Press a/b/c/d to select the channel you want to edit, and then press ENTER. • The selected channel information displays. 2 Setting the child lock You can block the viewing of any channel. 1 • The selected channel information will be displayed.
Watching TV Sorting programmes Erasing programmes Channel positions can be sorted freely. The individual programme can be erased. 1 Press MENU and the MENU screen displays. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 2 Press c/d to select “Setup”. 3 Press a/b to select “Programme Setup”, and then press ENTER. If you already set the password, enter it here. 3 Press a/b to select “Programme Setup”, and then press ENTER.
Watching TV Useful viewing functions Split-screen viewing This function is conveniently used when, for instance, watching cooking programmes and taking notes. Picture and still image You can freeze a motion picture on the Display. Split-screen You can display two pictures except when inputting from the RS-232C or PC INPUT terminal. 1 1 2 Press P&P. • A moving image displays on the left screen and a still image displays on the right screen.
Watching TV Returning to the previously selected channel Press A to switch the currently tuned channel to the previously tuned channel. Press A again to switch back to the currently tuned channel. Press A to toggle between the currently selected input source and the previously selected one. Muting the audio temporarily Using Mute (e) on the remote control unit e mutes the current sound output. 1 Press e. 2 Press e again within 30 minutes to cancel the mute. • The sound is silenced.
Watching TV Switching the analogue audio format You can switch between multiple audio modes when watching a multiple audio or stereo broadcast programme. When receiving a bilingual signal Each time you press MPX, the mode switches among CH A, CH B and CH AB. Bilingual mode A-TV PAL In the NICAM TV broadcasts When receiving a stereo signal Each time you press MPX, the mode switches between NICAM STEREO and MONO.
Watching TV Password setting for the child lock (for A-TV (Analogue TV)/D-TV (Digital TV) input mode) Allows you to use a password to protect certain settings from being accidentally changed. Clearing the password Allows you to clear your password. 1 Repeat steps 1 to 4 in Setting a password. 2 Press a/b to select “Clear password”, and then press ENTER. 3 Press c/d to select “Yes”, and then press ENTER.
Watching TV Energy conservation settings Auto power-off at a designated time This function is conveniently used when, for instance, going to bed while watching TV. Auto power-off after the end of broadcast You can set the TV to automatically power off in about 15 minutes after the TV goes into a state of receiving no programme signals, such as the end of a broadcast day. 1 1 Press SLEEP. • Remaining time displays when sleep timer has been set.
Watching TV Power Management Ecology You can set the TV to automatically power off when no image is displayed on PC. 1 2 3 4 Press MENU and the MENU screen displays. Press c/d to select “Power Control”. Press a/b to select “Power Management”, and then press ENTER. Press a/b to select “Mode1” or “Mode2”, and then press ENTER. Power saving mode settings Off Mode1 When set to “Yes”, the TV activates the following power saving mode.
Watching TV Picture size settings Selecting the Wide Screen Signalling (WSS) picture size automatically WSS allows a television to switch automatically among the different screen formats. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 4 Selecting the Wide Screen Signalling (WSS) picture size manually The WSS signal has 4:3 auto-switching that allows you to select between Panorama and Normal. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”.
Watching TV Selecting the picture size manually Manual Selection You can select different picture sizes that account for the kind of each picture. Auto Selection If you set “WSS” and “4:3 Mode” in the Setup menu on page 30, the optimum WIDE mode is automatically chosen for every broadcast containing the WSS information. “WSS” menu To enable Auto Selection, set “WSS” in the Setup menu to “On”. (See page 30.) Press WIDE. 1 • The WIDE MODE menu displays.
Watching TV Selecting a preset AV Mode The AV Mode function enables you to select appropriate settings for audio and video to account for the system environment which can vary due to factors like room brightness, type of programme watched or the type of image input from external equipment. Using AV MODE on the remote control unit 1 Press AV MODE. 2 Press AV MODE again before the mode displayed on the screen disappears.
Watching TV Manual picture settings Selected item Picture adjustment OPC Sets whether or not the screen brightness is automatically adjusted according to the lighting condition in the room. (OPC setting: See this page.
Watching TV Advanced picture settings The advanced settings enable you to set the picture adjustment in more detail. There are six options you can choose from. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Picture”. H 3D-Y/C Provides high quality images with minimal dot crawl and cross colour noise. Selected item 3 Press a/b to select “Advanced”, and then press ENTER. 4 Press a/b to select the desired menu, and then press ENTER.
Watching TV Other picture settings Adjusting the image position Game Play Time For adjusting a picture's horizontal and vertical position. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 Press a/b to select “Position”, and then press ENTER. 4 Press a/b to select “H-Position” or “V-Position”.
Watching TV Audio adjustment You can adjust the audio of the selected AV mode. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Audio”. Audio This function allows you to enjoy bass-enhanced sound. 1 Repeat steps 1 to 2 in Audio Adjustment. 2 Press a/b to select “Bass Enhancer”, and then press ENTER. 3 Press c/d to select “On”, and then press ENTER.
Watching TV A-TV (Analogue)/D-TV (Digital) buttons Use the following buttons on the remote control to operate the menu. When you watch the TV for the first time When the TV powers on for the first time after purchase, perform the auto installation. A-TV (Analogue TV) You can run the auto installation to set channels automatically. 1 To watch the analogue TV, select “Auto Installation” from Setup menu. (See page 18.
Basic adjustment settings (Digital) Selecting D-TV menu 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Option”. 3 Press a/b to select “D-TV Menu”, and then press ENTER. D-TV Menu > Programme Programme Setup Option 4 Press a/b to select the desired item and adjust the item to the desired level. Press ENTER if necessary. 5 Press EXIT or MENU to exit the MENU. Press RETURN as necessary to return to the previous MENUs.
Basic adjustment settings (Digital) Electronic Programme Guide (EPG) What is an EPG? An “EPG (Electronic Programme Guide)” is a programme schedule, which is displayed on the TV screen. The EPG is broadcasted together with D-TV. The TV screen shows the EPG when the viewer presses EPG on the remote control, provided that the TV is receiving the digital broadcasting signal. The EPG enables you to search for a programme or view the programme schedule in detail.
Basic adjustment settings (Digital) 5 Check previous day programme information 1 Press G. 2 Press a/b/c/d to select the programme you want to check. 3 Press R. EPG Jun. 6 081 082 083 084 085 09:00 Jade J2 Interactive Information Channel Pearl High Definition Jade Jun.
Basic adjustment settings (Digital) Programme Guide You can check the schedule of D-TV events and view detailed information about current or future events. 1 Press GUIDE to display the programme guide list. 2 Press a/b to display your desired programme, and then press ENTER. • When you press ENTER, the TV displays the contents of the selected channel.
Basic adjustment settings (Digital) Programme List You can select the desired programme from the programme list. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Option”. 3 Press a/b to select “D-TV Menu”, and then press ENTER. 4 Press a/b to select “Programme”, and then press ENTER. 5 Press a/b to select “Programme List”, and then press ENTER. Selected item FAV You can easily select your favourite channel from the Favourite Programme List.
Basic adjustment settings (Digital) Installation The first time the receiver is powered on, “Programme list is empty” will display on the screen. Under the main menu, select “Installation” and enter into the submenu. Auto Search You can automatically search for and download TV channels. 1 2 Manual Adjust You can set some channel items manually. 1 Repeat steps 1 to 5 in Auto Search. Press MENU and the MENU screen displays. Press c/d to select “Option”.
Basic adjustment settings (Digital) Reset Data Use this function to clear the channel data. Video Setup This function allows you to select an output format. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Option”. 3 Press a/b to select “D-TV Menu”, and then press ENTER. 3 Press a/b to select “D-TV Menu”, and then press ENTER. 4 Press a/b to select “Setup”, and then press ENTER. 4 Press a/b to select “Setup”, and then press ENTER.
Basic adjustment settings (Digital) Digital Output This function allows you to select your preferred audio output system. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Option”. 3 Press a/b to select “D-TV Menu”, and then press ENTER. 4 Press a/b to select “Setup”, and then press ENTER. 5 Press a/b to select “System Setup”, and then press ENTER. 6 Press a/b to select “Audio Setup”, and then press ENTER. 7 Press a/b to select “Digital Output”, and then press ENTER.
Basic adjustment settings (Digital) Multilingual Time Setup You can select a different audio language when the broadcast has different audio language. Using MPX on the remote control 1 Press MPX. 2 Press a/b to select your desired audio language, and then press ENTER. Audio Language This function allows you to select your local time zone. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Option”. 3 Press a/b to select “D-TV Menu”, and then press ENTER.
Basic adjustment settings (Digital) Information S/W Update You can check the current version of the software on the screen. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Option”. 3 Press a/b to select “D-TV Menu”, and then press ENTER. 4 5 Press a/b to select “Option”, and then press ENTER. Press a/b to select “Information”, and then press ENTER. Information OAD Option S/W Update This function is only for service personnel to use for software updates.
Settings when using external devices Settings when using HDMI output devices HDMI terminals can carry audio and visual signals to the TV with an HDMI certified cable. When you want to output the audio and picture from an HDMI output device on the TV, select “INPUT1”, “INPUT2” or “INPUT3” by switching the input source. Connecting an HDMI output device HDMI cable (commercially available) HDMI output device Ø 3.
Settings when using external devices Selecting the input source and signal type Selecting input source Can use for selecting the input source. Using TV/VIDEO on the remote control unit or on the TV TV/VIDEO allows you to choose from the available input sources. Selecting input signal type For setting the signal type of external equipment. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Option”. 3 Press a/b to select “Input Select”, and then press ENTER.
Settings when using external devices Labelling input sources Skipping HDMI/RGB input You can assign each input source a label as you prefer. This setting allows you to skip the HDMI or RGB input on the “Input Select” menu. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 1 Press TV/VIDEO to select the desired input source. 3 Press a/b to select “Input Skip”, and then press ENTER. 2 Press MENU and the MENU screen displays.
AQUOS LINK Controlling HDMI devices using AQUOS LINK What is AQUOS LINK? Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD, Blu-ray Disc device) using a single remote control. By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV.
AQUOS LINK AQUOS LINK connection First connect the AQUOS LINK-compatible audio system or an AQUOS BD Player that supports the HDMI CEC protocol. NOTE • Refer to the operation manual of the device to be connected for further details. • After unplugging connection cables or changing the connection pattern, first turn on the power of the TV with all relevant device’s power turned on. Change the external input source by pressing TV/VIDEO, select the appropriate input source and verify the audiovisual output.
AQUOS LINK Selecting recorder Operating an AQUOS LINK device You can select a recorder for the recording from several connected recorders. 1 Repeat steps 1 to 3 in AQUOS LINK Auto power on. 2 Press a/b to select “Selecting Recorder”, and then press ENTER. Auto Power On AQUOS LINK allows you to operate the HDMIconnected device with one remote control. Use the following procedure to start playback. 1 Selecting recorder for recording by [REC] button Selecting Recorder 2 INPUT1 [1. 0. 0.
AQUOS LINK Listening with the AQUOS TV speaker system You can opt to listen to the TV sound only from the AQUOS TV speaker system. 1 Open the remote control unit’s flip cover, press OPTION and the AQUOS LINK menu screen displays. 2 Press a/b to select “By AQUOS SP”, and then press ENTER. Playback of titles using AQUOS LINK This section explains how to play back a title in the AQUOS BD Player.
AQUOS LINK Selecting media type for CEC-compatible recorder If your recorder has multiple storage media, select the media type here. the remote control unit’s flip cover, 1 Open press OPTION and the AQUOS LINK menu screen displays. 2 Press a/b to select “Media change”, and then press ENTER. Recording via the CEC-compatible recorder’s EPG (only for recorders) You can call up the CEC-compatible recorder’s EPG and preset timer recordings using the TV’s remote control.
Connecting a PC Use the PC terminals to connect a PC. NOTE • The PC INPUT terminals are DDC1/2B-compatible. • Refer to page 61 for a list of PC signals compatible with the TV. ANALOG RGB RGB cable (commercially available) Ø 3.5 mm stereo minijack cable (commercially available) AUDIO (R/L) PC Signal names for 15-pin mini D-sub connector Pin No. 5 15 4 10 14 2 3 9 13 8 12 Signal name 1 7 11 6 G B Not connected CSYNC Pin No.
Connecting a PC Selecting the picture size You can select the picture size as illustrated below. NOTE • Connect the PC before making adjustments. • Selectable picture size may vary with input signal type. Connecting a PC ANALOG RGB RGB cable (commercially available) Ø 3.5 mm stereo minijack cable (commercially available) AUDIO (R/L) PC 1 Press WIDE. • The WIDE MODE menu displays.
Connecting a PC Adjusting the PC image automatically This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available RGB cable, etc. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Option”. 3 Adjusting the PC image manually Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync.
Connecting a PC Input resolution settings Selecting the input resolution • Some input signals may have to be registered manually to display properly. • The pairs of input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again.
Connecting a PC PC Control of the TV • When a programme is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Attach an RS-232C cable cross-type (commercially available) to the Din/D-sub RS-232C for the connections. NOTE • This operation system should be used by a person who is accustomed to using PCs.
Connecting a PC PC compatibility chart VESA Horizontal Vertical Frequency Frequency Standard Resolution VGA SVGA 720 g 400 31.5 kHz 70 Hz 640 g 480 31.5 kHz 60 Hz ✓ 640 g 480 37.9 kHz 72 Hz ✓ 640 g 480 37.5 kHz 75 Hz ✓ 800 g 600 35.1 kHz 56 Hz 800 g 600 37.9 kHz 800 g 600 48.1 kHz 800 g 600 46.9 kHz VESA Horizontal Vertical Frequency Frequency Standard Resolution 1024 g 768 48.4 kHz 60 Hz ✓ 1024 g 768 56.5 kHz 70 Hz ✓ 1024 g 768 60.
Appendix Troubleshooting The problems described below are not always caused by malfunctions. Check the TV again before having the TV serviced. Problem Possible Solution • No power. • Check if you pressed POWER on the remote control unit. (See page 14.) If the indicator on the TV lights up red, press POWER. • Is the AC cord disconnected? (See page 10.) • Has the power been turned on? (See page 14.) • Unit cannot be operated. • External influences such as lightning, static electricity, etc.
Appendix Error messages about recording using AQUOS LINK The example of an error message displayed on a screen Error code Failed to record Cannot record the broadcast. S05 Failed to record Cannot record the broadcast. S06 Failed to record Cannot record the broadcast. S07 Failed to record S09 Failed to record S10 Failed to record S11 Failed to record S12 Failed to record Cannot record the programme. S13 Failed to record Cannot record the programme.
Appendix Reset If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 Press a/b to select “Reset”, and then press ENTER. 4 Press c/d to select “Yes”, and then press ENTER. Identification You can check the current version of the software on the screen.
Appendix Specifications Model LC-42D65H Item LC-46D65H 42o (1070 mm) Advanced Super View & BLACK TFT LCD LCD panel 46o (1170 mm) Advanced Super View & BLACK TFT LCD Resolution 2,073,600 pixels (1920 g 1080) Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV Function TV-Standard Receiving Channel PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 NTSC: M Digital DMB-TH VHF/UHF 44.25 — 863.
Appendix Dimensional drawings Unit: mm LC-42D65H 1004 646 526.2 409 550 62 708 933.2 200 400 95 114 400 305 LC-46D65H 1101 434 575.6 698 760 1023.4 62 550 124 95 400 175 400 325 66 42D65H_en_h.
Appendix Mounting the TV on the wall Removing the stand For wall mounting with the optional bracket, remove the stand. Before detaching/attaching the stand • • • • Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet. Remove all terminal covers and connected cables. Lay the TV down on cushioning (such as a blanket) over a table. Make sure two or more people perform the operation. CAUTION • Do not remove the stand from the TV unless using an optional bracket to mount it.
Appendix CLEARING THE PASSWORD If you forget your password, set a new password using the following procedure. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 Press a/b to select “Child Lock”, and then press ENTER. 4 The password input screen displays. 5 If you enter “3001” using 0-9, the “Child Lock” setting menu will be displayed. 6 Enter the 4-digit number as a password using 0-9. (See page 27.) The new password is now set. The Password is .
OPERATION MANUAL ENGLISH ԋᙔ ⥝㵲 LC-42D65H/LC-46D65H LC-42D65H LC-46D65H ϕをᒝᕊ ᩮᓩྐ⨓㣌⿏ LCD COLOUR TELEVISION ϕをᒝᕊ OPERATION MANUAL Printed in Malaysia 㲬㇛Ռࣇ߱ TINS-E027WJZZ 08P12-MA-NF 4246D65H cover.
