English 26" LCD COLOR TV TV LCD A COLOR DE 26" LD-26SH1U Español OPERATION MANUAL MANUAL DE FUNCIONAMIENTO English ...... E1 Español ..... S1 LD-26SH1U_cover1-2.
IMPORTANT: To aid in reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located on the rear of the TV. English ENGLISH CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT INFORMATION FCC Statement WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
E32 E32 E32 E33 E34 E34 E35 TV/AV mode Watching TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Watching TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting MTS (Multi ch TV Sound) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents PC mode Watching TV or video on the computer screen (MULTI SCREEN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting the video and audio sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Listening to the TV or another audio source while viewing the computer screen (SOUND) . . . . . . . . Using the menus in PC mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Tips and safety instructions - Water and Moisture – Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. - Stand – Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product.
GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) NEC-NATIONAL ELECTRICAL CODE Español - For added protection for this equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna.
Tips and safety instructions Power cord - Do not damage the power cord, place heavy objects on it, stretch it, or over bend it. Also, do not add extension cords. Damage to the cord may result in fire or electric shock. - Use only the power cord supplied with the TV. - Insert the power plug directly into the AC outlet. Adding an extension cord may lead to fire as a result of overheating. - Do not remove or insert the power plug with wet hands. Doing so could result in electric shock.
Product and accessory checklist Deutsch English Please check that the following items are included in the package.
Product description Main unit Front view 2 3 4 5 1 Opening/closing the front cover To open the cover, press . To close the cover, press until it clicks. INPUT 6 1. 2. 3. 4. 7 Speakers Headphone terminal Remote sensor window POWER button 8 MENU ENTER/BRIGHT MODE 9 VOL/ BRIGHT CH 10 5. Power LED Green: in use Red: in standby mode Orange: in power-saving mode (only for PC mode) Off: power off 6. S-video input terminal 7. Video input terminal 8. Audio input terminal - Left 9.
Product description English Main unit Rear view/right view B A Deutsch 1 2 3 19 5 C 6 Français B 4 7 10 11 12 13 1. Antenna input terminal 2. Video input terminal 3. Audio input terminal - Left AV-IN 1 4. Audio input terminal - Right 5. S-video input terminal 6. Video input terminal 7. Audio input terminal - Left AV-IN 2 8. Audio input terminal - Right 9. Component input terminals 10. S-video output terminal 11. Video output terminal 12.
Product description Remote control Cable clamp Use the supplied cable clamp to secure the cables connected to the terminals. POWER Virtual 1 PC TV AV HDMI/DVI FREEZE MULTI VIEW MODE 2 SLEEP MENU 3 4 9 10 11 12 13 CAUTION! - When adjusting the viewing angle, cables may be pulled. Therefore, ensure that the cables have sufficient slack. ENTER BRIGHT MODE BRIGHT 14 5 6 15 DISPLAY CC MTS MUTE 7 16 VOL 17 CH 18 8 FLASHBACK 19 1. POWER button 2. FREEZE button 3. SLEEP button 4.
Product description English Angle adjustment Adjust to an easy to view angle. CAUTION! Deutsch - Be sure to hold both sides of the TV when adjusting the viewing angle. The LCD panel used in this TV is made of glass. Pressure from hands on the LCD panel could cause damage. - Be careful not to allow your fingers to be pinched. Français approx. 15° Italiano approx. 5° approx. 45° English Español approx. 45° E13 LD-26SH1U_gb_01.
Remote control Using the remote control Use the remote control by pointing it towards the remote sensor window on the TV. Objects between the remote control and sensor window may prevent proper operation. 2. Insert two ("AAA" size, UM/SUM-4) batteries. Position the positive and negative ends of the batteries as indicated in the compartment. + - Remote sensor window - + 5 m (16' 4") 30° 3. Close the battery cover. Engage the claw on the cover into the battery housing and slide shut.
TV preparation steps English Use the following steps to connect and set up your TV. TV ...Required when using the TV as a television AV ...Required when using the TV as an AV monitor AV TV AV Connecting the TV to a computer (See pages E25 and E26.) - If your computer has an analog RGB output terminal, see Analog connection on page E25. - If your computer has a digital RGB output terminal, see Digital connection on page E26.
Basic adjustment screen operation The explanations in this manual use primarily the remote control. (Operations requiring the use of control buttons on the TV are specifically identified using the words "on the TV".) The following table shows the remote control buttons and their corresponding control buttons on the TV. Refer to this table when using control buttons on the TV. (For information on each control button's position on the TV, refer to page E10.
Connecting the TV to a home antenna terminal 2. A 300-ohm system is a flat "twin-lead" cable that can be attached to a 75-ohm terminal through a 300-75-ohm adapter (commercially available). 300-ohm twin-lead cable (flat) Notes: - The 75-ohm coaxial cable is recommended. - TV memory for channels is empty at shipment. To receive channels, use the CHANNEL SETTING menu. (See pages E28 through E30.) Outdoor antenna connection - Use one of the following two diagrams if you connect an outdoor antenna.
Connecting the TV to a home antenna terminal Cable TV (CATV) connection - A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-ohm coaxial cable to the set, screw the 75-ohm cable to the antenna input terminal (ANT). - Some cable TV companies offer "premium pay channels". Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
Connecting the TV to AV equipment - Ensure that the TV and all the equipment you are connecting to it are switched off before you begin. See page E10 for information on removing/replacing the terminal cover.
Connecting the TV to AV equipment AV equipment with video output terminals Front of the TV VIDEO AUDIO-L AUDIO-R Output terminals of AV equipment (Yellow) VIDEO (Yellow) AUDIO-L (White) AUDIO-R (Red) (White) (Red) AV-IN 3 RCA pin cable (commercially available) Right side of the TV Output terminals of AV equipment VIDEO (Yellow) (Yellow) VIDEO AV-IN 1 AUDIO-L AUDIO-R (White) (Red) (White) AUDIO-L (Red) AUDIO-R AV-IN 2 RCA pin cable (commercially available) Notes: - When using the vi
Connecting the TV to AV equipment S-VIDEO VIDEO AUDIO-L AUDIO-R (Red) AV-IN 3 Français S-VIDEO S-video cable (commercially available) AUDIO-L (White) AUDIO-R (Red) RCA pin cable (commercially available) Right side of the TV Output terminals of AV equipment AUDIO-L (White) (White) AUDIO-L AV-IN 1 S-VIDEO (Red) (Red) RCA pin cable (commercially available) AUDIO-R S-VIDEO English AUDIO-R S-video cable (commercially available) Note: - When using the S-video input terminal of AV-IN 1 or A
Connecting the TV to AV equipment AV equipment with component output terminals Output terminals of AV equipment Right side of the TV RCA pin cable (commercially available) AUDIO-L (White) AUDIO-R (Red) Y (Green) Pb Pr (White) AUDIO-L (Red) AUDIO-R (Green) Y (Blue) (Blue) Pb (Red) (Red) Pr AV-IN 2 Component video cable (commercially available) Note: - When using the component input terminals, do not connect the cable to the video input terminal of AV-IN 2.
Connecting the TV to AV equipment (Red) (White) AUDIO-R (Red) RCA pin cable (commercially available) DIGITAL Digital signal cable (separately sold, NL-C04J) Notes: - Make sure that the connected equipment is switched off. - Use the audio output terminals of AV-OUT as the audio input terminals for DVI. - After making the connection, follow the procedure below. 1. Press the POWER button to turn on the TV. (See page E32.) 2. Press the HDMI/DVI button once or twice to select DVI mode. (See page E32.
Connecting the TV to AV equipment AV equipment with input terminals Rear of the TV S-VIDEO VIDEO AUDIO-L AUDIO-R Input terminals of AV equipment AV-OUT (Yellow) (White) (Red) RCA pin cable (commercially available) (Yellow) VIDEO (White) AUDIO-L (Red) AUDIO-R S-video cable (commercially available) S-VIDEO The image displayed on the TV screen and the sound can be output via the AV-OUT terminals to AV equipment.
Connecting the TV to a computer CAUTION! Français Deutsch PC analog RGB input terminal (Mini D-sub 15 pin, 3 rows) Italiano Computer Analog RGB output terminal (Mini D-sub 15 pin, 3 rows) PC analog signal cable (supplied) - Paying attention to the connector direction, firmly insert the signal cable straight into the connector, and then tighten the screws at both ends.
Connecting the TV to a computer Notes: - Make sure that the connected computer is switched off. - After making the connection, follow the procedure below. 1. Press the POWER button to turn on the TV. (See page E32.) 2. Press the PC button once or twice to select PC (digital) mode. (See page E32.) After a short time, the message asking you to change the "DVI SELECT" setting might appear. When the message appears, go to step 3. 3. Press the button to select "PC".
Connecting the TV to a power source - When connecting, ensure that the TV is switched off. - Use only the power cord supplied with the TV. - Be careful not to over bend the cable or add extension cords as this could lead to a malfunction. English CAUTION! Power input terminal Power cord (supplied) Italiano 1. Connect the power cord (supplied) to the power input terminal. Français Deutsch See page E10 for information on removing/replacing the terminal cover.
Setting TV channels The following table shows the channels this TV can receive. VHF Channels 2 through 13 UHF Channels 14 through 69 Channel 1 (HRC and IRC mode only) Cable Channels 2 through 125 (STD, HRC, and IRC) Displaying the CHANNEL SETTING menu POWER Virtual PC TV AV HDMI/DVI FREEZE MULTI VIEW MODE (You must subscribe to a cable TV service to receive cable channels.) SLEEP ENTER TV memory for channels is empty at shipment. To receive channels, use the CHANNEL SETTING menu.
1. Display the CHANNEL SETTING menu. (See page E28.) 2. Press the buttons to select "CHANNEL SEARCH", and press the ENTER button. CHANNEL SEARCH 2 AIR < TV/AV> 3. Press the ENTER button. The tuner will search through all available channels in your area and save them to the TV memory. Note: - To interrupt Channel Search, press the MENU button. Channel Search will stop at the current channel and will not save any higher channels. 4.
Setting TV channels Adding weak or additional channels or erasing unwanted channels from TV memory (CHANNEL MEMORY) Using "CHANNEL MEMORY", you can add channels that could not be saved by "CHANNEL SEARCH" because the signal was too weak. 1. Display the CHANNEL SETTING menu. (See page E28.) 2. Press the buttons to select "CHANNEL MEMORY", and press the ENTER button. < TV/AV> CHANNEL MEMORY 2 AIR 3. Press the CH buttons or the buttons to select each desired channel to add or erase.
ADJUSTMENT RETURN AUTO CLOCK PHASE H-POS V-POS RESET Note: - When using the TV with a digital connection, automatic screen adjustment is unnecessary. Virtual TV AV HDMI/DVI FREEZE MULTI VIEW MODE 1. Press the POWER button on the TV to turn on the TV. When the power LED lights red, press the POWER button on the remote control. 2. Press the PC button to select the PC (analog) mode. "PC" and "ANALOG" will appear in the upperright corner of the screen.
Common operations Turning power on/off Switching display modes (INPUT) POWER POWER Virtual PC TV AV Virtual HDMI/DVI PC FREEZE MULTI VIEW MODE SLEEP MENU AV SLEEP ENTER BRIGHT MODE TV HDMI/DVI FREEZE MULTI VIEW MODE MENU ENTER BRIGHT MODE BRIGHT BRIGHT 1. Press the PC, TV, AV, or HDMI/DVI button. The TV will switch to the display mode for the button you pressed. Notes: - Each time you press the AV button, the input changes in the order of AV1 AV2 AV3 AV1... .
Adjusting the backlight POWER Virtual PC TV AV 33 HDMI/DVI FREEZE MULTI VIEW MODE MENU Français SLEEP ENTER BRIGHT MODE BRIGHT 1. Press the BRIGHT button. 2. Press the buttons to adjust the brightness. Increase button Decrease button The screen for adjusting the brightness will automatically disappear after several seconds. Note: - You can also adjust the brightness using the control buttons on the TV. 1. Press the VOL/BRIGHT buttons. 2. Press the MENU button to select "BRIGHT". 3.
Common operations Adjusting the volume Enjoying surround sound (Virtual Dolby Surround) The volume can be set individually for PC mode and TV/AV mode. Start by switching to the display mode for which you want to set the volume. DISPLAY CC MTS The Virtual Dolby Surround function allows you to enjoy powerful, realistic sound, just like in a movie theater. MUTE VOL CH FLASHBACK Manufactured under license from Dolby Laboratories.
Common operations English Selecting the language on the screen Deutsch You can select the language (English/Spanish/ French) using the MODE SELECT(1) menu while in any mode. (The selected language will be displayed in all modes.) POWER Virtual PC TV AV HDMI/DVI SLEEP Français FREEZE MULTI VIEW MODE MENU ENTER BRIGHT MODE BRIGHT English Español Italiano 1. Press the MENU button to display the MENU screen. 2. Press the buttons to select "MODE SELECT(1)", and press the ENTER button. 3.
Watching TV Watching TV TV memory for channels is empty at shipment. The first time you use the TV or when you move to a new area, set the channels using the CHANNEL SETTING menu. (See page E28.) POWER Virtual PC TV AV HDMI/DVI FREEZE MULTI VIEW MODE SLEEP Notes: - To switch the display mode to TV in the following cases when in PC mode, press the TV button. - When watching TV in the PIP/SPLIT window. (See page E50.) - When listening to the TV. (See page E51.
POWER Virtual PC POWER Virtual PC TV AV AV SLEEP HDMI/DVI FREEZE MULTI VIEW MODE SLEEP TV HDMI/DVI FREEZE MULTI VIEW MODE MENU ENTER BRIGHT MODE MENU BRIGHT ENTER BRIGHT MODE DISPLAY BRIGHT CC MTS MUTE VOL DISPLAY CC MTS MUTE 1. Press the MTS button. The audio changes in the following order depending on the broadcast you are receiving. Receiving a stereo broadcast: STEREO STEREO MONO STEREO... CH FLASHBACK 1. Press the FLASHBACK button.
Watching TV Setting the Closed Caption (CLOSED CAPTION) This TV is equipped with an internal Closed Caption decoder. "Closed Caption" is a system which allows conversations, narration, and sound effects in TV programs and home videos to be viewed as captions on the TV screen. - Not all programs and videos will offer Closed Captioning. - The Closed Caption broadcasts can be viewed in 2 modes: Caption (CAPTION) and Text (TEXT). For each mode, two channels are available: CH1 and CH2.
Voluntary movie rating system (MPAA rating) Rating G GENERAL AUDIENCES. All ages admitted. PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children. Age PG-13 PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13. base R RESTRICTED. Under 17 requires accompanying parent or adult guardian. NC-17 NO ONE 17 AND UNDER ADMITTED. X X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.
Watching TV TV Parental Guidelines Content base FV (Fantasy violence) Rating V (Violence) S (Sexual situation) L (Adult language) D (Sexually suggestive dialog) TV-Y (All children) TV-Y7 (Direct to older children) Age TV-G (General audience) base TV-PG (Parental guidance suggested) TV-14 (Parents strongly cautioned) TV-MA (Mature audience only) : The content rating can be set.
HDMI/DVI FREEZE MULTI VIEW MODE SLEEP MENU Notes: - Set ratings are blocked only when you activate V-chip Block (see page E42). - If you set "G" to "BLOCK", all ratings are automatically blocked. - If you set "X" to "BLOCK", then "G", "PG", "PG-13", "R", and "NC-17" are not blocked. ENTER BRIGHT MODE DISPLAY BRIGHT CC MTS MUTE VOL Setting V-chip for TV Parental Guidelines (TV GUIDELINES) CH FLASHBACK 1. Press the TV button to select TV mode. 2. Press the MENU button to display the MENU screen.
Watching TV Setting V-chip for Block Content (BLOCK CONTENT) Canceling V-chip Block temporarily 1. Repeat steps 1 to 4 of "Setting V-chip for MPAA rating" on page E41. (The V-CHIP BLOCK menu will be displayed.) 2. Press the buttons to select "TV GUIDELINES", and press the ENTER button. 3. Press the buttons to select "BLOCK CONTENT", and press the ENTER button. < TV/AV> BLOCK CONTENT Y Y7 FV G PG V S L D 14 V S L D MA V S L 4.
Equipment connected to AV-IN 1 Equipment connected to AV-IN 2 Equipment connected to AV-IN 3 Equipment connected to HDMI Equipment connected to DVI-D Display mode "AV1" Display mode "AV2" Display mode "AV3" Display mode "HDMI" Display mode "DVI" Notes: - Sometimes no image will be displayed during fast searching of video. - The display may flicker during slow playback of video depending on the VCR or videotape you are using. - You cannot play shooting games that use gun controllers with this TV.
Handy features (for TV/AV mode) Pausing the screen (FREEZE) This feature pauses the image from the TV or other connected AV equipment. This is handy when you want to write down a recipe or the address for a prize contest. Switching power off after a specified length of time (SLEEP) The TV can automatically switch off (standby) after a specified length of time. This is handy if you want to use the TV at bedtime.
Menu setting items VIDEO ADJUST menu CONTRAST ......................................... Page BLACK LEVEL .................................... Page COLOR ................................................ Page TINT ..................................................... Page SHARPNESS ...................................... Page FLESH TONE ....................................... Page VIDEO SELECT ................................... Page WHITE BALANCE ...............................
Using the menus in TV/AV mode VIDEO ADJUST menu (See page E45 for information on using the menus.) Description Adjusts contrast. Adjusts the overall brightness of the screen. Adjusts the color depth. Adjusts the color tone. Adjusts the image quality. Adjusts the flesh tone color. Selects the type of image to display improving the quality of the images. This adjustment is valid only for TV and images from the video input terminals (RCA pin). Adjusts the color temperature. - STD .................
Using the menus in TV/AV mode POSITION Deutsch Français English RESET Italiano Description Selects the screen size. - NORMAL ........ Displays 4:3 aspect ratio TV images normally. - WIDE .............. Expands 4:3 images horizontally to fill the entire screen (16:9). - ZOOM1 ........... Expands the image to fill the screen (16:9) with wide black bands across the top and bottom such as letterbox format movies. - ZOOM2 ...........
Using the menus in TV/AV mode MODE SELECT menu (See page E45 for information on using the menus.) Item SLEEP TIMER Description Specifies how many minutes until the TV switches off (standby). You can also set this item directly using the remote control, instead of the adjustment screen. (See page E44.) Selects the language (English, Spanish, or French) on the screen. (See page E35.) Reduces the visual lag inherent in fast-motion scenes. Selects how to adjust the sound via the audio output terminals.
Using the menus in TV/AV mode Item CC/TEXT Description Sets the CC/TEXT mode. (See page E38.) English CLOSED CAPTION menu (See page E45 for information on using the menus.) RESET HDMI SETUP menu (HDMI mode only) (See page E45 for information on using the menus.) Item SIGNAL TYPE Description Selects the signal type from the HDMI input terminal. Unless the image quality looks obviously poor, select "AUTO". Selects the internal color space conversion method when an RGB signal is input.
Watching TV or video on the computer screen (MULTI SCREEN) In PC mode you can simultaneously display TV or video images and your computer screen. The MULTI SCREEN function has the following two types of windows. PIP The TV or video image appears in a small window (PIP window) on the computer screen. SPLIT The computer screen and the TV or video image appear side by side in two split windows.
English Listening to the TV or another audio source while viewing the computer screen (SOUND) You can listen to the TV or another audio source while the TV is displaying the computer screen. POWER PC TV AV Deutsch Virtual HDMI/DVI FREEZE MULTI VIEW MODE SLEEP MENU ENTER BRIGHT MODE Français BRIGHT Italiano 1. Press the MENU button in PC mode to display the MENU screen. 2. Press the buttons to select "MODE SELECT1", and press the ENTER button. buttons to select "SOUND", and 3.
Using the menus in PC mode You can adjust the color of the computer screen image and make MULTI SCREEN settings using the menus in PC mode. Menu setting items ADJUSTMENT menu AUTO* ................................. Pages E31 and CLOCK* ............................................... Page PHASE* ............................................... Page H-POS* ................................................ Page V-POS* ................................................. Page How to adjust using the menus 1.
Using the menus in PC mode Adjustment pattern Deutsch English If you are using Windows, use the adjustment pattern on the supplied CD-ROM. 1. Load the supplied CD-ROM into the CD-ROM drive of the computer. 2. Open [My Computer] and select CD-ROM. 3. Double click on [Adj_uty.exe] to run the adjustment program. The adjustment pattern will appear. Français Adjustment pattern 4. After completing the adjustments, press the computer's [Esc] key to exit the adjustment program.
Using the menus in PC mode ADJUSTMENT menu (See page E52 for information on using the menus.) When using the TV with a digital connection, this menu adjustment is not necessary. Description Automatically adjusts "CLOCK", "PHASE", "H-POS", and "V-POS". (See page E31.) Adjusts the clock so that no vertical flicker noise is emitted. Item AUTO CLOCK Vertical flicker noise PHASE Makes an adjustment after "CLOCK" is properly adjusted so that no horizontal flicker noise is emitted.
Using the menus in PC mode When using the TV with a digital connection, this menu adjustment is not necessary. Color pattern CONTRAST RESET Adjust contrast watching the color pattern so that all gradations appear. Resets adjustment values for this menu to their original factory settings. Notes about auto adjustment: - If you are not using the adjustment pattern, it is necessary to have black area and white area of at least 5 mm x 5 mm on the screen. Adjustment may not be possible without those areas.
Using the menus in PC mode COLOR CONTROL menu (See page E52 for information on using the menus.) Item COLOR MODE Description Selects the color tone. - STD ................ Displays images using the original color tone of the LCD monitor. - sRGB .............. sRGB is an international standard for color representation defined by the IEC (International Electrotechnical Commission).
Using the menus in PC mode DVI SELECT RESET E57 LD-26SH1U_gb_02.P65 57 2005/01/21, 16:55 Deutsch Français Italiano Español Description Reduces the visual lag inherent in fast-motion scenes. Selects how to adjust the sound via the audio output terminals. - DVI AUDIO-IN .... Enables these terminals to act as the audio input terminals for DVI mode. - FIXED ............. Set "FIXED" when connecting to a VCR for recording, etc. The volume via the audio output terminals is fixed.
Using the menus in PC mode MULTI SCREEN menu (See page E52 for information on using the menus.) Item MULTI SCREEN DISPLAY PIP SIZE PIP POSITION PC POSITION SUB SOURCE SOUND RESET Description Designates whether the computer screen and TV or video images are displayed simultaneously. - OFF - PIP .................. The TV or video image appears in a small window (PIP window) on the computer screen. - SPLIT ..............
Installing set-up information and the ICC profile (For Windows) For Windows 95 Installing monitor set-up information into Windows 95. This explanation assumes that the CD-ROM drive is "D" drive. 1. Load the supplied CD-ROM into the CD-ROM drive of the computer. 2. Click on the [Start] button. From [Settings], choose [Control Panel]. 3. Double click on [Display]. 4. Click on [Settings], [Advanced Properties], and [Monitor], then [Change]. 5.
Installing set-up information and the ICC profile (For Windows) For Windows 2000 For Windows Me Installing monitor set-up information into Windows 2000, and setting the monitor's ICC profile as a predetermined value. This explanation assumes that the CD-ROM drive is "D" drive. Installing monitor set-up information into Windows Me, and setting the monitor's ICC profile as a predetermined value. This explanation assumes that the CD-ROM drive is "D" drive. 1.
Installing set-up information and the ICC profile (For Windows) For Windows XP - When using the ICC profile, set "COLOR MODE" and "WHITE BALANCE" to "STD". E61 LD-26SH1U_gb_02.P65 61 Deutsch Français Italiano English 1. Load the supplied CD-ROM into the CD-ROM drive of the computer. 2. Click on the [Start] button. Choose [Control Panel]. 3. Click on [Appearance and Themes] and [Display]. When using the Classic View, double click on [Display]. 4. Click on [Settings], [Advanced], and [Monitor]. 5.
Information about the ColorSync profile (For MacOS) About the ColorSync profile ColorSync is Apple Computer's color management system and enables color reproduction characteristics to be realized when used with a compatible application. A ColorSync profile describes the color characteristics of the LCD monitor. Notes: - This monitor's ColorSync profile works with MacOS 8.5 or above. - When using the ColorSync profile, set "COLOR MODE" and "WHITE BALANCE" to "STD".
TV AV HDMI/DVI SLEEP MENU ENTER BRIGHT MODE BRIGHT [TV/AV mode] 1. Press the VIEW MODE button. The mode switches in the following order each time you press the button: NORMAL WIDE ZOOM1 ZOOM2 FULL NORMAL... NORMAL Displays 4:3 aspect ratio TV images normally. WIDE Expands 4:3 images horizontally to fill the entire screen (16:9). ZOOM1 Expands the image to fill the screen (16:9) with wide black bands across the top and bottom such as letterbox format movies.
Other features [TV] - POWER button - VOL/BRIGHT buttons - INPUT button - CH buttons Muting the sound (MUTE) This feature is handy when you want to mute the sound such as when the phone rings or someone comes to the door. [Remote control] - POWER button - VOL buttons - MUTE button - Input buttons (PC, TV, AV, and HDMI/DVI) - CH buttons - Channel buttons (0-9 and 100) - FLASHBACK button 1. Press the MUTE button. The sound will be muted and "MUTE" will be displayed.
An arm or stand based on the VESA standard (commercially available) can be attached to the TV. Procurement of the arm or stand is at the customer's discretion. 4. Remove the six screws and then remove the stand from the TV. English Instructions for attaching a VESA-compliant mount Arms or stands able to be used Deutsch Attachments must satisfy the following. - Compatible with the VESA standard. - The six screw holes on the section to be attached have a gap of 100 mm between them.
TV care Troubleshooting If you think the TV may be faulty, please check the following points before taking it to be repaired. If afterwards it still does not work, please contact the shop where you purchased the TV or your nearest Sharp authorized Service Center. The TV's fluorescent tubes have a limited life span. - If the screen darkens, persistently flickers or does not light up, the fluorescent tube has reached the end of its operational life span.
The TV picture does not move. The video picture does not move. There is no sound from the TV speakers. There is no sound from the audio output terminals. Control buttons do not work. The adjustment screen does not appear. Some kind of load noises from outside might interfere with Control buttons do not work. The remote control does not work. normal operation. - Turn off the power and turn it on after waiting at least 5 seconds, There is no picture. and then check the operation.
TV care Problem "Temperature" is displayed on the screen. Power LED blinks red. What to Check If the temperature inside the TV rises, this message is displayed on the screen and then the TV switches to standby mode. Check the following points before turning the power on.
E69 LD-26SH1U_gb_02.P65 69 2005/01/21, 11:21 Deutsch Français Italiano Input terminals Video image: RCA pin x 3 Component image: x 1 S-video image: x 2 HDMI: x1 DVI-D 24 pin x 1 (Also used as a computer digital signal input terminal) Audio: RCA pin (L/R x 4) (One set of these is also used as an audio output terminal.) Antenna: F-type Computer signal: Analog: mini D-sub 15 pin (3 rows) x 1 Digital: DVI-D 24 pin x 1 (Also used as a DVI image input terminal) Computer audio: mini stereo jack ( 3.
Specifications Dimensions (Units: mm (inch)) - 110 (411/32) 487 (193/16) 534 (211/32) 658 (2529/32) 324 (1249/64) 256 (103/32) Power cord: approx. 1.8 m (5' 10") PC analog signal cable: approx. 1.8 m (5' 10") PC audio cable: approx. 1.8 m (5' 10") Digital signal cable, NL-C04J (purchased separately): approx. 2.0 m (6' 6") Note: - As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice.
Specifications DPMS: Display Power Management Signaling No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Function Red video signal input Green video signal input Blue video signal input N.C. GND For red video signal GND For green video signal GND For blue video signal GND +5V GND N.C. DDC data For Hsync signal input For Vsync signal input DDC clock DPMS mode ON Screen Display on Power consumption H-sync V-sync 123 W STANDBY SUSPEND Display off 2.