Installation Manual RESU 10H DLT Type-C

4.2 Powering up the battery pack

Put the battery pack in operation by taking the following steps :

1. Make sure that the circuit breaker switch is in the OFF position.

2. Move the circuit breaker switch to the ON position to turn on the main

battery pack.

See if the battery pack is successfully initialized.

The power on indicator on the front should turn on in green.

3. Turn on the inverter.

4.3 Shutting off the battery pack

To shut down the battery pack, take the following steps :

1. Turn off the inverter.

2. Turn off the battery pack by moving the circuit breaker switch to the OFF position.

3. Make sure that every indicator on the battery pack is o. It would take 60 seconds at

maximum for the indicators to turn off.