Installation Manual RESU 10H DLT Type-C

32
6. Uninstallation & Return
6.1 Return/replacement instructions
6.1.1 Uninstallation from the wall
1. Switch OFF the Inverter before starting
the uninstallation of the battery pack.
When the inverter operate(switch on/off),
installer must follow the installation guide
for the inverter
2. Press the two buttons and pull the two
latches (marked position) on the rear.
3. Open the wiring box cover (about2~10
degrees),
and pull to remove it.
4. Switch off the circuit breaker.
5. Loosen the screw (marked position), and
remove the transparent protection cover.