Installation Manual RESU 10H DLT Type-C

33
6. Check for voltage at power cable terminal.
7. Disconnect the communication cable from
the communication port.
8. Disconnect the power cable from the
terminal block.
Disconnect the positive terminal (+) ① first,
and next the negative terminal (−) ②
and finally ground terminal ③.
9. Disassembly power cable terminal.
10. Assemble transparent protection cover.
Close the wiring box cover, and
lock the ratchet.
11. Loosen the two hex-socket screws
using a socket wrench to detach the
battery pack from the wall using lift
handles.
12. Repack in Box (See 3.1.1)
CAUTION
According to regional regulations,
several people may be required for
moving equipment.