Installation Manual RESU 10H DLT Type-C

7
 Do not disconnect, disassemble or repair by unqualified personnel.
Services must be made by qualified personnel only.
 Do not step on the product or the product package. The product may be damaged.
 Do not place any foreign objects on the top of the Battery Pack and on the cooling fin.
 Do not charge or discharge damaged battery.
 Do not connect any AC conductors or Photo-voltaic conductors directly to the
battery pack and should be only connected to the Inverter.
 The RESU battery pack has been certified IP55 and can be installed indoors as well as outdoors.
However, if installed outdoors, do not allow the battery pack to be exposed to direct sunlight and
water source as it may cause :
- Power limitation phenomena in the battery
(with a resulting decreased energy production by the system)
- Premature wear of the electrical/electromechanical components and
mechanical components.
- Reduction in performance, service life and possible damage of the battery
 A ventilated area is strongly recommended for handling the product.
 Only use the product with a LGC-authorized inverter. For a list of compatible
inverters, go to : http://www.lgesspartner.com
 Do not touch if liquid is spilled on the product. There is a risk of electric shock.
Handle the battery wearing the insulated gloves.
 Do not damage the unit in such ways as dropping, deforming, impacting, cutting
or penetrating with a sharp object. It may cause a leakage of electrolyte or fire.