Installation Manual RESU 10H SEG Type-R

6 Uninstallation & Return
6.1 Return/replacement instructions
6.1.1 Uninstallation from the wall
1. Switch OFF the Inverter before
starting the uninstallation of the
battery pack.
2. Press the two buttons and pull the
two latches (marked position) on the
rear.
32
3. Open the wiring box cover (about
2~10 degrees), and pull to remove it.
4.
5.
Switch off the circuit breaker and make sure
that is in the OFF position. After that turn off
the disconnect switch.
Loosen the screw (marked position),
and remove the transparent protection
cover.
CAUTION
MUST follow the turn off
procedure. and do not turn off the
disconnect switch while the battery
is in operation.