Installation Manual RESU 10H SEG Type-R

Check for voltage at power cable
terminal.
6.
7. Disconnect the communication cable
from the communication port.
8. Disconnect the power cable from
the terminal block. Disconnect the
positive terminal (+) ǔrst, and
next the negative terminal (−) Ǖand
nally ground terminal ǖ
9. Assemble transparent protection
cover. Close the wiring box cover,
and lock the ratchet.
10. Loosen the two hex-socket screws
using a socket wrench to detach the
battery pack from the wall using lift
handles.
Uninstallation & Return
CAUTION
According to regional regulations,
several people may be required for
moving equipment.
33
11. Repack in Box (See 3.1.1)