RESU 10M

4.5 Battery Pack Installation

Secure the battery pack to a wall to prevent it from moving. If the battery pack is installed

above the floor or on a platform, make sure that the wall or platform is capable of supporting

the battery pack’s weight.

4.5.1

Standing Type

1. Determine where the mounting brackets are to be

placed using the drill template.

2. Drill holes in the wall for the M6(0.25in) screw

anchors. The drilling depth should be at least 50mm.

3. Drive the screw anchors through the mounting

brackets into the holes.

4. Tighten the screws to a torque of 5Nm.

- 5 -