Installation Manual RESU 7H SEG Type-R

Transparent protection cover
7. Loosen the screw (marked position),
and remove the transparent
protection cover.
8. Remove the cap on hole in the bottom
side, and assemble the ¾" conduit
plug. In the case outdoor, it must be
sealed to comply “IP55” [ex) gasket,
sealing foam, silicon, etc], where the
battery pack installation is outdoor.
9. Connection Power / Communication
cables, according to the labels
marked.
CAUTION
If you lose or break a protection cover,
that violates NEC Regulation.
Installation
23