Installation Manual RESU 7H SEG Type-R

6
Safety
1.2 Safety instructions
For safety reasons, installers are responsible for familiarizing themselves with the
contents of this document and all warnings before performing installation.
1.2.1 General safety precautions
Over-voltages or wrong wiring can damage the battery pack and cause deagration,
which can be extremely dangerous.
All types of breakdown of the product may lead to a leakage of electrolyte or
ammable gas.
Avoid installing the battery pack where ammable materials are stored. Do not
install in places where explosive gas or chemicals are present.
During installation of the battery, the utility grid, solar input must be disconnected
from the Battery Pack wiring. Wiring must be carried out by a qualied personnel.
Battery Pack is not user serviceable. High voltage is present in the device.
The electronics inside the Battery Pack are vulnerable to electrostatic discharge.
Be sure to be grounded before handling the battery pack.
Read the label with Warning Symbols and Precautions, which is visibly under to the
Battery Cover (see Section 1.3)er
1.2.2 Battery handling guide
Ëh Do not expose battery to open ame.
Ëh Do not place the product nearby highly ammable materials. It may lead to re
or explosion in case of accident.
Ëh Do not expose or place near water sources like downspouts or sprinklers.
Ëh Do not store this product in a place exposed to direct sunlight.
Ëh A ventilated area is strongly recommended for handling the product.
Ëh Store at cool and dry place. (Do not store in greenhouses and storage areas for hay,
straw, cha, animal feed, fertilizers, vegetables or fruit products.)
Ëh Store the product on a at surface.
Ëh Store the product out of reach of children and animals.
Ëh Store the product where it should be minimal dust and dirt in the area.