User Manual

19
EnglishDeutschFrançaisItalianoEspañolEnglish
Adjusting the screen display
WHITE BALANCE Menu
COOL ... Color tone bluer than standard
• .......... Color tone slightly bluer than standard
STD ...... Color tone standard setting
• .......... Color tone slightly redder than standard
WARM .. Color tone redder than standard
USER
- Selecting [USER] will display the setting
values for [R-CONTRAST], [G-CONTRAST]
and [B-CONTRAST], in order to make fine
adjustments.
- Use the
button to select
[R-CONTRAST], [G-CONTRAST] and
[B-CONTRAST].
R-CONTRAST .....
button for blue-green
button for red
G-CONTRAST .....
button for purple
button for green
B-CONTRAST ......
button for yellow
button for blue
Note:
- On settings other than [STD] not all gradations
can be displayed. To display all gradations, set
to [STD].
GAIN CONTROL Menu
When the monitor is used with a digital
connection, this menu adjustment is not
necessary.
AUTO
When [AUTO] is selected with the
button, the
[BLACK LEVEL] and [CONTRAST] settings are
automatically adjusted. After the automatic
adjustment, perform manual adjustment when
necessary.
BLACK LEVEL
Total screen brightness can be adjusted while
watching the color pattern. ( buttons)
CONTRAST
While watching the color pattern, adjustments can
be made so that all gradations appear.
( buttons)
Notes:
About AUTO (Auto Gain Control function)
- The Auto Gain Control adjusts contrast and
black level based on the brightest and darkest
colors of the image displayed.
- If you are not using the Adjustment Pattern it is
necessary to have black area and white area of
at least 5 mm x 5 mm on the screen. Adjustment
may not be possible without those areas.
- If [OUT OF ADJUST] is displayed, perform
manual adjustment.
Color pattern