User Manual

25
EnglishDeutschFrançaisItalianoEspañolEnglish
Monitor care
The 3D image on the display appears blurred
and doubled.
- Confirm if the 3D display compatible software is
running.
- For software supporting SHARP 3D Technology
- Press the 3D button to enter 3D mode (the
power LED changes to blue).
- Confirm that screen resolution is set to
1024 x 768.
- When two or more users are logged on, let all
users log off, and then log on as the user who
logged on first.
- The best viewing position in 3D mode is the
position where the entire red strip (or its bottom)
appears darkest. Move your head slightly
up/down, right/left, and forward/backward to
adjust your position.
When it is in 3D mode, the screen appears a
little darker.
- In 3D mode, the screen appears a little darker
than in 2D mode. (This is not a malfunction.)
The mode cannot be switched to 3D mode by
pressing the 3D button.
- Does the current software support SHARP 3D
Technology? If you are using software that does
not support SHARP 3D Technology, refer to the
operation manual of the software.