LCD Monitor LCD Farbmonitor Moniteur LCD Monitor LCD Monitor LCD LL-172A LL-172G OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUALE D'USO MANUAL DE FUNCIONAMIENTO LL-172A
Notice for Users in the USA Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Notice for Users in Europe This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE. Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/68/ EEG.
Deutsch Français Español Italiano FOR CUSTOMERS IN U.K.
Congratulations! The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment.
TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.com/ 7 Français Deutsch English What does labelling involve? This product meets the requirements for the TCO'99 scheme which provides for international and environmental labelling of personal computers.
Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are chemically related to another group of environmental toxins, PCBs.
Deutsch Français Italiano Español 10 12 13 14 14 14 17 17 17 18 18 19 19 20 20 20 21 21 22 25 25 25 25 26 27 31 34 35 English Tips and safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Angle adjustment, height adjustment . . . . . . . . . . . . . . . . . . . . . . . .
Tips and safety precautions - The TFT color LCD panel used in this monitor is made with the application of high precision technology. However, there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness. Please note that these are not malfunctions but common phenomena of LCDs and will not affect the performance of the monitor.
Deutsch English Español Notes: - [LL-172A] Use only the cables supplied with the monitor. - [LL-172G] Be sure to use cables that are less than 3 m in length. - [LL-172G] The analog signal cable (DVI-I 29 pin – mini D-sub 15 pin) is to be purchased separately. (model name: NL-C02E) - [LL-172G] The 2-input cable (DVI-I 29 pin – DVI-D 24 pin/mini D-sub 15 pin) is to be purchased separately. (model name: NL-C03J) - You are advised to retain the carton in case the monitor needs to be transported.
Product description [LL-172A] [LL-172G] 15 8 6 15 8 6 7 7 5 5 1 2 3 4 5 5 9 10 11 13 14 1 2 3 4 9 10 1112 13 14 1. AUTO button [LL-172A] ........... This button is used to perform automatic adjustment of the screen (CLOCK, PHASE, H-POS and V-POS). (p.21) INPUT button [LL-172G] ......... To switch between the signal's input terminals. 2. MENU button ........................... This button is used to pop-up, select and close the OSD (On Screen Display) Menu. 3. / MODE button ...........
Angle adjustment, height adjustment Height adjustment [LL-172G] CAUTION! English 1. Release the lock. 2. Adjust the height of the stand. 3. Set the lock. - Be sure to hold both sides of the monitor when adjusting the viewing angle. The LCD panel used in this monitor is made of glass. Pressure from hands on the LCD panel could cause damage. - Be careful not to allow your fingers to be pinched. approx. 70 mm Deutsch 2 Angle adjustment approx.
Connecting the monitor and turning the monitor on and off CAUTION! Connecting the monitor to a computer - When connecting, ensure that both the monitor and computer are switched off. - Be careful not to over bend the cable or add extension cords as this could lead to a malfunction. Analog connection [LL-172A] Connect the accessory analog signal cable to the analog RGB output terminal of the computer.
Digital connection [LL-172G] Connect the accessory analog signal cable, or separately-sold analog signal cable (model name: NL-C02E) to the analog RGB output terminal of the computer. - Connect the accessory analog signal cable to the analog RGB input terminal (INPUT-1). - Connect the separately-sold analog signal cable (model name: NL-C02E) to the DVI-I input terminal (INPUT-2). Connect the accessory digital signal cable to the digital RGB output terminal of the computer.
Connecting the monitor and turning the monitor on and off When connecting using a separately sold 2-input cable [LL-172G] Notes: - When using the 2-input cable, set the connecting input terminal [INPUT-2] to [2LINES] under the MODE SELECT-2 Menu. (p.24) - The monitor connected to the 2-input cable by analog connection may not be automatically recognized and setup under Plug & Play. Perform storage of setup information manually. (p.
Connection of headphones (commercially available) Turning the power on 1. Turn on the main power of the monitor. Headphones (commercially available) can be connected. English Connecting the monitor and turning the monitor on and off Main power switch Deutsch Headphone terminal 2. Press the monitor's power button. 3. Turn on the computer. Connecting the monitor to a power source Press power button. Turn on the computer power supply.
Connecting the monitor and turning the monitor on and off Changing between input terminals Turning the power off [LL-172G] 1. Turn the computer off. 2. Press the monitor's power button. The power LED will disappear. Use the INPUT button to switch between signal input terminals. Analog RGB input terminal DVI-I input terminal Turn the computer off. INPUT-1 INPUT Press power button.
Adjusting the screen display and speaker volume Resetting all adjustment values All adjustment values can be returned to their original ex-factory values in one command. 1. Turn off the monitor power. / MODE 2. Press the MENU button and the button simultaneously, and while doing this press the power button (i.e. turn the power on). Continue to press the buttons until [ALL RESET] appears on the screen. Reset is complete when the displayed message disappears. Adjustment lock release 1.
Adjusting the screen display and speaker volume Adjusting the speaker volume Setting display mode 1. Without the OSD Menu being displayed, press the or the button. 2. Check that [VOLUME] is selected. If it is not selected, press the / MODE button and select [VOLUME]. Color tone or brightness can be changed with one command. 3. Adjust by pressing the button (increase). STD Displays image with the color tone results from original scheme of liquid crystal panel. OFFICE Display brightness is lowered.
MENU button 1. Press the MENU button. The ADJUSTMENT Menu will be displayed. (Example: Displayed screen of the LL-172G) Screen display for adjustment First display an image that makes the entire screen light. If you are using Windows, you can use the Adjustment Pattern on the accompanying CDROM. 2. Press the button. The screen will become dark and [ADJUSTING] will be displayed. After a few seconds the ADJUSTMENT Menu will return. (The automatic adjustment is now complete.) 3.
Adjusting the screen display ADJUSTMENT Menu Manual screen adjustment When the LL-172G is used with a digital connection, this menu adjustment is not necessary. 1. Display an image that makes the entire screen light. (p.21) 2. Display the OSD Menu by pressing the MENU button. (Example: Displayed screen of the LL-172G) ADJUSTMENT Menu Select the option by pressing the / MODE button.
Adjusting the screen display COLOR CONTROL Menu When the LL-172G is used with a digital connection, this menu adjustment is not necessary. WHITE BALANCE 1. After selecting [WHITE BALANCE], press the button. The WHITE BALANCE menu will be displayed. CONTRAST While watching the color pattern, adjustments can be made so that all gradations appear.
Adjusting the screen display MODE SELECT-1 Menu MODE SELECT-2 Menu Note: - Depending on the resolution of the input signal, even if menu options can be selected, the display may not change. INFORMATION A model name (MODEL), a serial no. (S/N), and usage time (USAGE TIME) of the monitor can be checked. 1. After selecting [INFORMATION], press the button. The product information will display. 2. Press the MENU button.
Use a soft dry cloth to lightly wipe away any grime from the cabinet and control panel. If they are very dirty, apply neutral detergent to a dampened soft cloth, wring it out well and wipe away grime. The monitor's fluorescent tubes have a limited life span. - If the screen darkens, persistently flickers or does not light up, the fluorescent tube has reached the end of its operational life span. Please inquire at the shop where you purchased the monitor or your nearest Sharp authorized Service Center.
Monitor care Information for customers on environmentally friendly disposal of this SHARP product If this product cannot be used any more, it should be given away and disposed of in a legally correct and environmentally sound way. DO NOT DISPOSE OF THIS PRODUCT WITH YOUR HOUSEHOLD WASTE OR MIXED WITH OTHER WASTES! YOU MIGHT ENDANGER THE ENVIRONMENT! Sharp Corporation is committed to protecting the environment and conserving energy.
Deutsch English Español Italiano Model name LL-172A-W (White)/LL-172A-B (Black) LL-172G-W (White)/LL-172G-B (Black) LCD display 43 cm measured diagonally TFT LCD module Resolution (max.) SXGA 1280 x 1024 pixels Displayable colors (max.) Approx.16.19 million colors (6 bit + FRC) Brightness (max.) 300 cd/m2 Dot pitch 0.264 (H) x 0.264 (V) mm Contrast ratio 450:1 Angle of visibility Left-right 160°; up-down 160° (contrast ratio > 5) Screen display size Horizontal 337.9 mm x Vertical 270.
Specifications - Analog signal cable: approx. 1.8 m - Audio cable: approx. 1.8 m Dimensions (Units: mm) 374 [LL-172G] - Digital signal cable: approx. 1.8 m - Analog signal cable, NL-C02E (purchased separately): approx. 2.0 m - 2-input cable, NL-C03J (purchased separately): approx. 0.25 m 374 317 [LL-172A] Note: - As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice.
Specifications Display mode Hsync Vsync Relevant signal timings (digital) [LL-172G] Dot frequency Display mode Hsync Vsync Dot frequency VESA Power Macintosh series Sun Ultra series English - Recommended resolution is 1280 x 1024. - All are compliant only with non-interlaced. - Frequencies for Power Macintosh and the Sun Ultra series are reference values. To connect, another adapter (commercially available) may be required.
Specifications The analog RGB input connector pin Power management (Mini D-sub connector with 15 pins) The LL-172A is based on VESA DPMS. The LL172G is based on both VESA DPMS and DVI DMPM. To activate the power management function, the video card and the computer used with it must also conform to these standards. No.
Installing set-up information and the ICC profile (For Windows) Depending on the type of computer or OS, you may need to install the monitor set-up information on your system. If so, follow the steps below to install the monitor set-up information. (Depending on the type of computer or OS, command names and methods may differ. Please follow the computer's own operation manual while reading this.) If the "Add New Hardware Wizard" has not appeared: 1.
Installing set-up information and the ICC profile (For Windows) For Windows 2000 For Windows Me Installing monitor set-up information into Windows 2000, and setting the monitor's ICC profile as a predetermined value. This explanation assumes that the CD-ROM drive is "D" drive. Installing monitor set-up information into Windows Me, and setting the monitor's ICC profile as a predetermined value. This explanation assumes that the CD-ROM drive is "D" drive. 1.
Installing set-up information and the ICC profile (For Windows) Deutsch Français English - When using the ICC profile, set as follows: - [DISPLAY MODE]: [STD] or [OFFICE] - [WHITE BALANCE]: [STD] - [GAMMA]: [0] Italiano 1. Load the accessory CD-ROM into the CD-ROM drive of the computer. 2. Click on the [Start] button. From [Settings], choose [Control Panel]. 3. Double click on [Display]. 4. Click on [Settings] and [Advanced]. 5.
Information about the ColorSync profile (For MacOS) About the ColorSync profile ColorSync is Apple Computer's color management system and enables color reproduction characteristics to be realized when used with a compatible application. A ColorSync profile describes the color characteristics of the LCD monitor. Notes: - This monitor's ColorSync profile works with MacOS 8.5 or above.
Arms or stands able to be used Attachments must satisfy the following. - Compatible with the VESA standard. - Have a gap of 100 mm x 100 mm between the screw holes on the section to be attached. - Not be likely to fall off or break off after being attached to the monitor. CAUTION! Do not disassemble the stand. Parts may spring out and cause injury. CAUTION! - Be careful not to get your fingers pinched between the display and stand nor to let the stand drop. These could lead to injury.
148
149
150
SHARP CORPORATION Printed in China Gedruckt in China Imprimé en Chine Stampato in Cina Impreso en China 0NW170184304A (1)
