Owner's Manual

Touch Panel Settings

The touch display driver 2 starts automatically and the icon ( ) appears on the menu bar.

Caution

• If LL-P202V and LL-S242A are connected at the same time, a screen for selecting the model will appear each time you select

a setting.

• Depending on the connected model, the screen image is different.

• Default value may vary according to the models.

Howtoconguresettings

Conguringsettingsfromthemenubar

1. Click the touch display driver 2 icon ( ) on the menu bar.

2. Click a menu to change a setting.

• Current Resolution: The model currently being used and the current screen resolution appear.

• Calibration: See page 7.

• Properties: See page 8.

• Hardware Information: Select this to specify “Rotate Mode”.

- Rotate Mode:

To correct the touch position when the screen is rotated, select the screen angle from the following:

Standard (0°) / 90° / 180° / 270°

• Digitizer pen (LL-P202V only): See page 10.

• Version Information: Shows the version of the touch display driver 2.

• Disable TD Driver:

Select to disable the touch panel function.

To disable a single touch panel function, see “Function Setting”. (See page 9.)

ConguringsettingsfromSystemPreferences

1. Click “System Preferences” from the Apple menu ( ).

2. Click “SharpTouchDisplay2”.

3. Click the menu and select settings.

TIPS

• If the “Show Setting Utility in menu bar” checkmark is removed, the touch display driver 2 icon ( ) does not appear on the

menu bar.