User Manual

19
EnglishDeutschFrançaisItalianoEspañolEnglish
MODE SELECT Menu
MODE SELECT
OSD H-POSITION
OSD V-POSITION
SCALING 3
COLORS 260K 16M
LANGUAGE
1024x768 ANALOG
V:60Hz H: 4 8.4kHz
Notes:
- Depending on the resolution of the input signal,
even if menu options can be selected, the
display may not change.
- To choose a menu option: / MODE button
- To complete adjustment: MENU button
OSD H-POSITION (OSD horizontal position)
The position of the OSD Menu can be moved to
the left and right. ( buttons)
OSD V-POSITION (OSD vertical position)
The position of the OSD Menu can be moved up
and down. ( buttons)
SCALING (Level of scaling)
When the display is enlarged, the sharpness of the
image can be set. ( buttons)
Note:
- When the display mode is set to less than
1024 x 768 pixels, the display is enlarged to
cover the whole screen (i.e. the side ratio of the
display may change).
COLORS
Maximum display colors can be set. (
buttons)
260K (approx. 260,000)
16M (approx. 16.19 million)
LANGUAGE
You can choose the language used in OSD Menu.
1.Press the button.
The Language Selection Menu will be displayed
on the screen.
2.Use the / MODE button to choose a language.
3.Press the MENU button.
Language Selection Menu will disappear.
Adjusting the screen display (When using an analog signal)