Operation Manual Service Tool

11.5.7. Drawing Check
[PROCEDURE]
(1) Start drawing check tool
Templete is shown on the screen.
(2)Trace template and draw lines. (in order from 1 to 10)
・Draw lines with a finger. (not pen)
・Draw lines to each end of 4 corners and 4 sides.
・Check the following item.
- There is no abnormal wobble and winding of line.
- There is no abnormal broken line.
- It is possible to draw smooth lines on template lines.
- It is possible to draw lines to ends at four sides.
- There is no abnormal delay in drawing lines.
※To clear all drawn lines, press "C" key.