Owner's Manual

34
E
n
Cutting an object
You can cut an object and save it to the clipboard.
1. Select an object. (Page 31)
2. Select
“Cut” from the expansion menu.
TIPS
• To manipulate multiple objects at once, follow the steps in “Selecting multiple objects” (page 32).
n
Duplicating an object
1. Select an object. (Page 31)
2. Select
“Duplicate” from the expansion menu.
TIPS
• To manipulate multiple objects at once, follow the steps in “Selecting multiple objects” (page 32).
n
Deleting an object
1. Select an object. (Page 31)
2. Select
“Delete” from the expansion menu.
TIPS
• “Clear Sheet” in “Eraser” can be used to delete all objects on the current sheet (page 25).
• To manipulate multiple objects at once, follow the steps in “Selecting multiple objects” (page 32).
n
Trimming an object (image)
1. Select an object (image). (Page 31)
Objects other than images cannot be trimmed.
2. Select
“Trimming” from the expansion menu.
3. Drag
on the edge of image to specify the area you want to trim.
4. After checking the above preview, touch “OK”.
TIPS
• To return to the state prior to trimming, use “Undo” (page 36), or repeat steps 1 to 2 above, select “Select Entire Image”, and
touch “OK”.
• Multiple image les cannot be trimmed at once.
n
Pasting an object
To paste the object in the clipboard, select “Paste” in the menu.