User Manual

General Information
- Controls and Indicators -
E-7
■ Speaker System
01. Tweeter
02. Woofer
03. Bass Reflex Duct
04. Speaker Terminals
Make sure nothing comes into contact with the speaker diaphragms when you re-
move the speaker grilles.
Controls and Indicators (continued)
Placing the speaker system:
There is no distinction between the right and the left speakers.
1
2
3
4
Left speaker Right speaker
■ Speaker connection
Connect the black wire to the minus (-) terminal and the red wire to the plus (+)
terminal.
Caution:
● Connect the speaker wires to the speakers first, then to the unit.
● Use speakers with an impedance of 4 ohms or more, as lower impedance speak-
ers can damage the unit.
● Do not mistake the right and the left channels. The right speaker is the one on the
right side when you face the unit.
● Do not let the bare speaker wires touch each other.
Incorrect Incorrect
Black
Red
Red
Black
*07-E02-07-MD9000H(SEEG) 01.4.19, 3:07 PM7